Post on 11-Jun-2018
transcript
ALVIT LED SOLUTIONS
Le informazioni contenute in questa brochure sono fornite esclusivamente
a scopo informativo, sono soggette a variazioni senza preavviso e non
devono essere intese come un impegno da parte di Alvit.
Alvit non si assume responsabilità o obblighi per eventuali errori
o imprecisazioni che possano riscontrarsi nella presente brochure.
The contents of this catalougue are intended only for informative
purpose, are subject to change without notice and shall be considered
as binding for Alvit.
Alvit does not undertake any responsability or obligation for possible
mistakes or inaccuracies which may be found the present brochure.
Alvit srlVia Padania, 620853 Biassono - (MB) Italyt. +39 039 2497874f. +39 039 2497875www.alvit.itinfo@alvit.it
ISO9001: 2000
n o n - s t o p l i g h t
“La luce che brilla il doppio dura la metà” Jimi Hendrix
R00
-12
luce d’emergenza e soluzioni LED
emergency lightingand LED solutions
Cover LED 2012_Serie AL.qxd 02/03/2012 17:51 Pagina 1
1ALVIT | POWER SUPPLIES AND EMERGENCY LIGHTING MODULES FOR LED
Nata nel 1988 Alvit Srl è oggi azienda leader nella progettazione e produzione di kit per illuminazione di emergenza (per lampade alogene, fluorescenti e diodi led) e alimentatori LED.
L’azienda, certificata ISO 9001:2000, vanta una vasta gamma di prodotti, dotati dimarcatura CE, ENEC e UL studiati per soddisfare le più diverse richieste del mercato.
La competenza in materia di illuminazione di emergenza ci consente di affiancare il cliente anche nella progettazione e realizzazione di prodotti in base alle specificheesigenze.
La filosofia Alvit è da sempre tesa alla ricerca della migliore tecnologia per larealizzazione di un prodotto rispondente alle caratteristiche di compattezza,funzionalità, lunga durata ed affidabilità nel tempo.
Tutto rigorosamente made in Italy e nel rispetto delle normative ambientali e di sicurezza.
Sull’onda dei successi ottenuti in vent’anni di progettazione, ricerca e sviluppo di inverter per l’illuminazione di emergenza, Alvit ha ampliato la gamma dei suoiprodotti realizzando sistemi intelligenti di autodiagnosi per controllo remoto.
ALVIT, NON-STOP LIGHT
ISO9001: 2000
3ALVIT | POWER SUPPLIES AND EMERGENCY LIGHTING MODULES FOR LED
ALVIT LED SOLUTIONS
Alimentatori per LED ________________________________________2LED power supply
AL3 __________________________________4
Alimentatori per power LED e moduli LED. 4,2W max.Power supplies for power LED and LED modules. 4,2W max.
AL3.UL ________________________________5
Alimentatori UL per power LED e moduli LED. 4,4W max.UL power supplies for power LED and LED modules. 4,2W max.
AL6 __________________________________6
Alimentatori per power LED e moduli LED. 7,7W max.Power supplies for power LED and LED modules. 7,7W max.
AL10__________________________________7
Alimentatori per power LED e moduli LED. 10W max.Power supplies for power LED and LED modules. 10W max.
AL10.UL _______________________________8
Alimentatori UL per power LED e moduli LED. 6W max.UL power supplies for power LED and LED modules. 6W max.
AL10.SW_______________________________9
Alimentatori per power LED e moduli LED. 11,2W max.Power supplies for power LED and LED modules. 11,2W max.
ALR10 ________________________________10
Alimentatori per power LED e moduli LED. 10W max.Power supplies for power LED and LED modules. 10W max.
AL14 IP65 _____________________________11
Alimentatori per power LED e moduli LED. 14W max.Power supplies for power LED and LED modules. 14W max.
AL15 _________________________________12
Alimentatori per power LED e moduli LED. 16,8W max.Power supplies for power LED and LED modules. 16,8W max.
AL20 _________________________________13
Alimentatori per power LED e moduli LED con PFC passivo. 20W max. Power supplies for power LED and LED modules, passive PFC. 20W max.
AL16D________________________________14
Multitensione&Multicorrente dimmerabile DALI. 16,8W max.Multicurrent&Multivoltage DALI dimmable. 16,8W max.
ALT35 ________________________________15
Alimentatori per power LED e moduli LED con PFC. 35W max. Power supplies for power LED and LED modules, PFC. 35W max.
AL35D________________________________16
Alimentatori per power LED e moduli LED con PFC. 35W max. Power supplies for power LED and LED modules, PFC. 35W max.
AL35P ________________________________17
Alimentatori per power LED e moduli LED con PFC. 35W max. Power supplies for power LED and LED modules, PFC. 35W max.
CL24mini _____________________________18
Convertitore 12÷ 48V per power LED. 31,5W max.12÷ 48V converter for power LED. 31,5W max.
CL24dim______________________________19
Convertitore 12÷ 48V per power LED. 31,5W max.12÷ 48V converter for power LED. 31,5W max.
CL24D _______________________________20
Convertitore 12÷ 24V per power LED. 16,8W max.12÷ 48V converter for power LED. 16,8W max.
CLon-off ______________________________21
Convertitori LED con soft start&stopLED converter with soft start&stop
Illuminazione d’emergenza________________________________23Emergency lighting modules
Serie L micro ___________________________24
Alimentatore elettronico con unità d’emergenza integrata per ledCombined electronic ballast and emergency lighting module for LED
Serie L _______________________________25
Alimentatore elettronico con unità d’emergenza integrata per ledCombined electronic ballast and emergency lighting module for LED
Serie EL60 _____________________________26
Unità d’emergenza per ledEmergency lighting module for LED
Serie ELT60 ____________________________27
Unità d’emergenza per ledEmergency lighting module for LED
Serie ELH _____________________________28
Unità d’emergenza per Led 230V GU10Emergency lighting module for 230V GU10 LED
Serie ELL _____________________________28
Unità d’emergenza per Led 12V GU5.3Emergency lighting module for 12V GU5.3 LED
Schemi di collegamento___________________________________31Wiring diagrams
POWER SUPPLIES AND EMERGENCY LIGHTING MODULES FOR LED
ALVIT | POWER SUPPLIES AND EMERGENCY LIGHTING MODULES FOR LED 4
ALIMENTATORI PER LED MADE IN ITALYLED power supply
SELV
AL335 AL350 AL370 AL312 AL324350mA, 1-3 LED 500mA, 1-2 LED 700mA, 1 LED 12V, 350mA 24V, 175mA
AL3
> Versione a corrente costante per power LED> Versione a tensione costante per moduli LED> Grado di protezione , IP20> Morsetti a vite, 2,5mmq> Protezione al cortocircuito, sovraccarico,
circuito aperto e termica > Elevato rendimento con minima dispersione
di calore ed assoluta affidabilità nel tempo> Conformità alle norme EN61347-2-13,
EN61347-1, EN62384, EN55015, EN61000-3-2, EN61547
> Constant current version for power LED> Constant voltage version for power LED> Degree protection, IP20> Screwable terminals connection, 2,5mmq> Short circuit, overload, open circuit and
thermal protection> High efficiency and absolute reliability> Complying with EN61347-2-13, EN61347-1,
EN62384, EN55015, EN61000-3-2,EN61547
Idoneo per funzionamento a range esteso 110-264V - 50/60Hzcon declassamento della potenza. Contattare l’ufficio tecnicoSuitable for operation at extended range 110-264V - 50/60Hz.Contact technical department.
SELV AL312
Corrente costante Tensione costanteConstant Current Constant Voltage
AL335 AL370AL350
Tensione di alimentazione ACTensione di alimentazione DCFrequenza di alimentazioneCorrente di alimentazioneFattore di potenza
Massima corrente di uscitaTensione di uscitaMassima tensione a vuotoPotenza di uscita
Temp. ambiente massima TaTemperatura max sul punto TcPeso
Mains voltage ACMains voltage DCMains frequencyMains currentPower factor
Max output currentOutput voltageMax output voltageOutput power
Ambient temperature TaMax case temperature on TcWeight
220-240V176-264V 0 / 50/60 Hz50mA0,5 C
350mA3-12V15V4,2W
-10÷50° C75°0,03 Kg
220-240V176-264V0 / 50/60 Hz50mA0,5 C
350mA3-12V15V4,2W
-10÷50° C75°0,03 Kg
220-240V176-264V 0 / 50/60 Hz50mA0,5 C
350mA12V12V4,2W
-10÷50° C75°0,03 Kg
220-240V 176-264V0 / 50/60 Hz50mA0,5 C
350mA12V12V4,2W
-10÷50° C75°0,03 Kg
220-240V176-264V 0 / 50/60 Hz50mA0,5 C
700mA3-5V6V3,5W
-10÷50° C75°0,03 Kg
220-240V176-264V0 / 50/60 Hz50mA0,5 C
700mA3-5V6V3,5W
-10÷50° C75°0,03 Kg
220-240V176-264V 0 / 50/60 Hz50mA0,5 C
500mA3-8V11V4W
-10÷50° C75°0,03 Kg
220-240V176-264V0 / 50/60 Hz50mA0,5 C
500mA3-8V11V4W
-10÷50° C75°0,03 Kg
220-240V176-264V 0 / 50/60 Hz50mA0,5 C
175mA24V24V4,2W
-10÷50° C75°0,03 Kg
220-240V 176-264V0 / 50/60 Hz50mA0,5 C
175mA24V24V4,2W
-10÷50° C75°0,03 Kg
AL324
AL6-312AL6-335 AL6-370AL6-350 AL6-324> Disponibile anche nella versione con coprimorsetti. Serie AL6-3...
> Also available with terminal cover.Series AL6-3...
Corrente costante Tensione costanteConstant Current Constant Voltage
5ALVIT | POWER SUPPLIES AND EMERGENCY LIGHTING MODULES FOR LED
ALIMENTATORI PER LED MADE IN ITALYLED power supply
AL335UL AL350UL AL370UL AL312UL AL324UL350mA, 1-3 LED 500mA, 1-2 LED 700mA, 1 LED 12V, 350mA 12V, 175mA
AL3.UL
> Versione a corrente costante per power LED> Versione a tensione costante per moduli LED> Grado di protezione , IP20> Morsetti a vite, 2,5mmq> Class 2> Protezione al cortocircuito, sovraccarico,
circuito aperto e termica > Elevato rendimento con minima dispersione
di calore ed assoluta affidabilità nel tempo> Approvazioni: UL-CSA (E337736)> Constant current version for power LED> Constant voltage version for power LED> Degree protection, IP20> Screwable terminals connection, 2,5mmq> CLASS 2 > Short circuit, overload, open circuit and
thermal protection> High efficiency and absolute reliability> Approvals: UL- CSA (E337736)
AL312UL
Corrente costante Tensione costanteConstant Current Constant Voltage
AL335UL AL370ULAL350UL
Tensione di alimentazione ACFrequenza di alimentazioneCorrente di alimentazioneFattore di potenza
Massima corrente di uscitaTensione di uscitaMassima tensione a vuotoPotenza di uscita
Temp. ambiente massima TaTemperatura max sul punto TcPeso
Mains voltage ACMains frequencyMains currentPower factor
Max output currentOutput voltageMax output voltageOutput power
Ambient temperature TaMax case temperature on TcWeight
110-120V50/60 Hz90mA0,5 C
350mA3-12V13V4,4W
-10÷50° C75°0,03 Kg
110-120V50/60 Hz90mA0,5 C
350mA3-12V13V4,4W
-10÷50° C75°0,03 Kg
110-120V50/60 Hz90mA0,5 C
350mA12V12V4,2W
-10÷50° C75°0,03 Kg
110-120V50/60 Hz90mA0,5 C
350mA12V12V4,2W
-10÷50° C75°0,03 Kg
110-120V50/60 Hz80mA0,5 C
700mA3-5V6V3,2W
-10÷50° C75°0,03 Kg
110-120V50/60 Hz80mA0,5 C
700mA3-5V6V3,2W
-10÷50° C75°0,03 Kg
110-120V50/60 Hz90mA0,5 C
500mA3-8V9V4,2W
-10÷50° C75°0,03 Kg
110-120V50/60 Hz90mA0,5 C
500mA3-8V9V4,2W
-10÷50° C75°0,03 Kg
AL324UL
110-120V50/60 Hz80mA0,5 C
175mA24V24V4,2W
-10÷50° C75°0,03 Kg
110-120V50/60 Hz80mA0,5 C
175mA24V24V4,2W
-10÷50° C75°0,03 Kg
Tensione di alimentazione ACTensione di alimentazione DCFrequenza di alimentazioneCorrente di alimentazioneFattore di potenza
Massima corrente di uscitaTensione di uscitaMassima tensione a vuotoPotenza di uscita
Temp. ambiente massima TaTemperatura max sul punto TcPeso
Mains voltage ACMains voltage DCMains frequencyMains currentPower factor
Max output currentOutput voltageMax output voltageOutput power
Ambient temperature TaMax case temperature on TcWeight
ALVIT | POWER SUPPLIES AND EMERGENCY LIGHTING MODULES FOR LED 6
ALIMENTATORI PER LED MADE IN ITALYLED power supply
AL635 AL650 AL670 AL612 AL624350mA, 1- 4 LED 500mA, 1- 3 LED 700mA, 1- 3 LED 12V, 500mA 24V, 250mA
AL6
> Alimentatore indipendente> Versione a corrente costante per power LED> Versione a tensione costante per moduli LED> Grado di protezione , IP20> Morsetti a vite, 2,5mmq> Classe di isolamento, II> Protezione al cortocircuito, sovraccarico,
circuito aperto e termica > Elevato rendimento con minima dispersione
di calore ed assoluta affidabilità nel tempo> Conformità alle norme EN61347-2-13,
EN61347-1, EN62384, EN55015, EN61000-3-2, EN61547
> Independent driver> Constant current version for power LED> Constant voltage version for power LED> Degree protection, IP20> Screwable terminals connection, 2,5mmq> Class II protection> Short circuit, overload, open circuit and
thermal protection> High efficiency and absolute reliability> Complying with EN61347-2-13, EN61347-1,
EN62384, EN55015, EN61000-3-2,EN61547
Idoneo per funzionamento a range esteso 110-264V - 50/60Hzcon declassamento della potenza. Contattare l’ufficio tecnicoSuitable for operation at extended range 110-264V - 50/60Hz.Contact technical department.
SELV AL612
Corrente costante Tensione costanteConstant Current Constant Voltage
AL635 AL670AL650
220-240V176-264V 0 / 50/60 Hz50mA0,5 C
500mA12V12V6W
-10 ÷ 50° C75°0,045 Kg
220-240V 176-264V0 / 50/60 Hz50mA0,5 C
500mA12V12V6W
-10 ÷ 50° C75°0,045 Kg
220-240V176-264V 0 / 50/60 Hz50mA0,5 C
350mA3-16V20V5,6W
-10 ÷ 50° C75°0,045 Kg
220-240V176-264V0 / 50/60 Hz50mA0,5 C
350mA3-16V20V5,6W
-10 ÷ 50° C75°0,045 Kg
220-240V176-264V 0 / 50/60 Hz80mA0,5 C
700mA3-11V15V7,7W
-10 ÷ 50° C75°0,045 Kg
220-240V176-264V0 / 50/60 Hz80mA0,5 C
700mA3-11V15V7,7W
-10 ÷ 50° C75°0,045 Kg
220-240V176-264V 0 / 50/60 Hz60mA0,6 C
500mA3-12V20V6W
-10 ÷ 50° C75°0,045 Kg
220-240V176-264V0 / 50/60 Hz60mA0,6 C
500mA3-12V20V6W
-10 ÷ 50° C75°0,045 Kg
220-240V176-264V 0 / 50/60 Hz50mA0,5 C
250mA24V24V6W
-10 ÷ 50° C75°0,045 Kg
220-240V 176-264V0 / 50/60 Hz50mA0,5 C
250mA24V24V6W
-10 ÷ 50° C75°0,045 Kg
AL624
AL3-612AL3-635 AL3-670AL3-650 AL3-624> Disponibile anche nella versione senza coprimorsetti. Serie AL3-6...
> Also available without terminal cover.Series AL3-6...
SELV Corrente costante Tensione costanteConstant Current Constant Voltage
Tensione di alimentazione ACTensione di alimentazione DCFrequenza di alimentazioneCorrente di alimentazioneFattore di potenza
Massima corrente di uscitaTensione di uscitaMassima tensione a vuotoPotenza di uscita
Temp. ambiente massima TaTemperatura max sul punto TcPeso
Mains voltage ACMains voltage DCMains frequencyMains currentPower factor
Max output currentOutput voltageMax output voltageOutput power
Ambient temperature TaMax case temperature on TcWeight
220-240V176-264V 0 / 50/60 Hz80 mA0,5 C
700mA12V12V8,4W
-10 ÷ 50° C75°0,05 Kg
20 /240V 176-264V0 / 50/60 Hz80 mA0,5 C
700mA12V12V8,4W
-10 ÷ 50° C75°0,05 Kg
220-240V176-264V 0 / 50/60 Hz80 mA0,5 C
410mA24V24V10W
-10 ÷ 50° C75°0,05 Kg
220-240V 176-264V0 / 50/60 Hz80 mA0,5 C
410mA24V24V10W
-10 ÷ 50° C75°0,05 Kg
220-240V176-264V 0 / 50/60 Hz100 mA0,5 C
700mA3-14V18V9,8W
-10 ÷ 50° C75°0,05 Kg
220-240V176-264V0 / 50/60 Hz100 mA0,5 C
700mA3-14V18V9,8W
-10 ÷ 50° C75°0,05 Kg
220-240V176-264V 0 / 50/60 Hz70 mA0,5 C
500mA3-15V20V8W
-10 ÷ 50° C75°0,05 Kg
220-240V176-264V0 / 50/60 Hz70 mA0,5 C
500mA3-15V20V8W
-10 ÷ 50° C75°0,05 Kg
220-240V176-264V 0 / 50/60 Hz80 mA0,5 C
350mA3-24V30V8,4W
-10 ÷ 50° C75°0,05 Kg
220-240V176-264V0 / 50/60 Hz80 mA0,5 C
350mA3-24V30V8,4W
-10 ÷ 50° C75°0,05 Kg
7ALVIT | POWER SUPPLIES AND EMERGENCY LIGHTING MODULES FOR LED
ALIMENTATORI PER LED MADE IN ITALYLED power supply
AL1035 AL1050 AL1070 AL1012 AL1024350mA, 1-7/8 LED 500mA, 1-4 LED 700mA, 1-4 LED 12V, 700mA 24V, 350mA
AL10
> Alimentatore indipendente> Versione a corrente costante per power LED> Versione a tensione costante per moduli LED> Grado di protezione , IP20> Morsetti a vite, 2,5mmq> Classe di isolamento, II> Protezione al cortocircuito, sovraccarico,
circuito aperto e termica > Elevato rendimento con minima dispersione
di calore ed assoluta affidabilità nel tempo> Conformità alle norme EN61347-2-13,
EN61347-1, EN62384, EN55015, EN61000-3-2, EN61547
> Independent driver> Constant current version for power LED> Constant voltage version for power LED> Degree protection, IP20> Screwable terminals connection, 2,5mmq> Class II protection> Short circuit, overload, open circuit and
thermal protection> High efficiency and absolute reliability> Complying with EN61347-2-13, EN61347-1,
EN62384, EN55015, EN61000-3-2,EN61547
Idoneo per funzionamento a range esteso 110-264V - 50/60Hzcon declassamento della potenza. Contattare l’ufficio tecnicoSuitable for operation at extended range 110-264V - 50/60Hz.Contact technical department.
SELV AL1012
Corrente costante Tensione costanteConstant Current Constant Voltage
AL1024AL1035 AL1070AL1050
ALVIT | POWER SUPPLIES AND EMERGENCY LIGHTING MODULES FOR LED 8
ALIMENTATORI PER LED MADE IN ITALYLED power supply
Tensione di alimentazione Frequenza di alimentazioneCorrente di alimentazioneFattore di potenza
Massima corrente di uscitaTensione di uscitaMassima tensione a vuotoPotenza di uscita
Temp. ambiente massima TaTemperatura max sul punto TcPeso
Mains voltageMains frequencyMains currentPower factor
Max output currentOutput voltageMax output voltageOutput power
Ambient temperature TaMax case temperature on TcWeight
AL1035UL AL1050UL AL1070UL AL1012UL AL1024350mA, 1-4/5 LED 500mA, 1-3 LED 700mA, 1-2 LED 12V, 500mA 24V, 250mA
AL10.UL
> Versione a corrente costante per power LED> Versione a tensione costante per moduli LED> Grado di protezione , IP20> Morsetti a vite, 2,5mmq> Class 2> Protezione al cortocircuito, sovraccarico,
circuito aperto e termica > Elevato rendimento con minima dispersione
di calore ed assoluta affidabilità nel tempo> Approvazioni: UL-CSA (E337736)> Constant current version for power LED> Constant voltage version for power LED> Degree protection, IP20> Screwable terminals connection, 2,5mmq> CLASS 2 > Short circuit, overload, open circuit and
thermal protection> High efficiency and absolute reliability> Approvals: UL- CSA (E337736)
110-120V50/60 Hz110 mA0,55 C
500mA12V12V6W
-10 ÷ 50° C75°0,05 Kg
110-120V50/60 Hz110 mA0,55 C
700mA12V12V6W
-10 ÷ 50° C75°0,05 Kg
AL1012UL
Corrente costante Tensione costanteConstant Current Constant Voltage
110-120V50/60 Hz110 mA0,55 C
250mA24V24V6W
-10 ÷ 50° C75°0,05 Kg
110-120V50/60 Hz110 mA0,55 C
250mA24V24V6W
-10 ÷ 50° C75°0,05 Kg
110-120V50/60 Hz110 mA0,55 C
350mA3-16V18V5,6W
-10 ÷ 50° C75°0,05 Kg
110-120V50/60 Hz110 mA0,55 C
350mA3-16V18V5,6W
-10 ÷ 50° C75°0,05 Kg
110-120V50/60 Hz120 mA0,55 C
700mA3-8V9V5,6W
-10 ÷ 50° C75°0,05 Kg
110-120V50/60 Hz120 mA0,55 C
700mA3-8V9V5,6W
-10 ÷ 50° C75°0,05 Kg
AL1024ULAL1035UL AL1070UL
110-120V50/60 Hz120 mA0,55 C
500mA3-12V13V6W
-10 ÷ 50° C75°0,05 Kg
110-120V50/60 Hz120 mA0,55 C
500mA3-12V13V6W
-10 ÷ 50° C75°0,05 Kg
AL1050UL
Tensione di alimentazione AC Tensione di alimentazione DC Frequenza di alimentazioneCorrente di alimentazioneFattore di potenza
Corrente di uscita posizione 1Corrente di uscita posizione 2Tensione da spentoTensione di lavoroMassima tensione a vuotoPotenza di uscita posizione 1Potenza di uscita posizione 2
Temp. ambiente massima TaTemperatura max sul punto TcPeso
Mains voltage ACMains voltage DCMains frequencyMains currentPower factor
Output current position 1Output current position 2Output voltage OFFOutput voltageMax output voltageOutput power position 1Output power position 2
Ambient temperature TaMax case temperature on TcWeight
220-240V176-264V 0 / 50/60 Hz85 mA0,55 C
500mA250mA1V3-16V18V8W4W
-10 ÷ 50° C75°0,05 Kg
220-240V176-264V0 / 50/60 Hz85 mA0,55 C
500mA250mA1V3-16V18V8W4W
-10 ÷ 50° C75°0,05 Kg
9ALVIT | POWER SUPPLIES AND EMERGENCY LIGHTING MODULES FOR LED
ALIMENTATORI PER LED MADE IN ITALYLED power supply
AL1050SW AL1060SW AL1070SW500mA, 250mA 600mA, 100mA 700mA, 350mA
AL10.SW bipotenza
> Alimentatore bipotenza indipendente> Versione a corrente costante per power LED> Grado di protezione , IP20> Morsetti a vite, 2,5mmq> Classe di isolamento, II> Protezione al cortocircuito, sovraccarico,
circuito aperto e termica > Elevato rendimento con minima dispersione
di calore ed assoluta affidabilità nel tempo> Conformità alle norme EN61347-2-13,
EN61347-1, EN62384, EN55015, EN61000-3-2, EN61547
> Independent bipower driver> Constant current version for power LED> Degree protection, IP20> Screwable terminals connection, 2,5mmq> Class II protection> Short circuit, overload, open circuit and
thermal protection> High efficiency and absolute reliability> Complying with EN61347-2-13, EN61347-1,
EN62384, EN55015, EN61000-3-2,EN61547
SELV Corrente costante bipotenzaConstant Current bipower
220-240V176-264V 0 / 50/60 Hz125 mA0,55 C
700mA350mA1V3-16V18W11,2W5,6W
-10 ÷ 50° C75°0,05 Kg
220-240V176-264V0 / 50/60 Hz125 mA0,55 C
700mA350mA1V3-16V18W11,2W5,6W
-10 ÷ 50° C75°0,05 Kg
AL1050 SW AL1070 SW
220-240V176-264V 0 / 50/60 Hz120 mA0,55 C
600mA100mA1V3-16V18W10,8W1,6W
-10 ÷ 50° C75°0,05 Kg
220-240V176-264V0 / 50/60 Hz120 mA0,55 C
600mA100mA1V3-16V18W10,8W1,6W
-10 ÷ 50° C75°0,05 Kg
AL1060 SW
Power 1 -->Power 2 -->
Power 1 -->Power 2 -->
Tensione di alimentazione ACTensione di alimentazione DCFrequenza di alimentazioneCorrente di alimentazioneFattore di potenza
Massima corrente di uscitaTensione di uscitaMassima tensione a vuotoPotenza di uscita
Temp. ambiente massima TaTemperatura max sul punto TcPeso
Mains voltage ACMains voltage DCMains frequencyMains currentPower factor
Max output currentOutput voltageMax output voltageOutput power
Ambient temperature TaMax case temperature on TcWeight
220-240V176-264V 0 / 50/60 Hz80 mA0,5 C
700mA12V12V8,4W
-10 ÷ 50° C75°0,05 Kg
20 /240V 176-264V0 / 50/60 Hz80 mA0,5 C
700mA12V12V8,4W
-10 ÷ 50° C75°0,05 Kg
220-240V176-264V 0 / 50/60 Hz80 mA0,5 C
410mA24V24V10W
-10 ÷ 50° C75°0,05 Kg
220-240V 176-264V0 / 50/60 Hz80 mA0,5 C
410mA24V24V10W
-10 ÷ 50° C75°0,05 Kg
220-240V176-264V 0 / 50/60 Hz100 mA0,5 C
700mA3-14V18V9,8W
-10 ÷ 50° C75°0,05 Kg
220-240V176-264V0 / 50/60 Hz100 mA0,5 C
700mA3-14V18V9,8W
-10 ÷ 50° C75°0,05 Kg
220-240V176-264V 0 / 50/60 Hz70 mA0,5 C
500mA3-15V20V8W
-10 ÷ 50° C75°0,05 Kg
220-240V176-264V0 / 50/60 Hz70 mA0,5 C
500mA3-15V20V8W
-10 ÷ 50° C75°0,05 Kg
220-240V176-264V 0 / 50/60 Hz80 mA0,5 C
350mA3-24V30V8,4W
-10 ÷ 50° C75°0,05 Kg
220-240V176-264V0 / 50/60 Hz80 mA0,5 C
350mA3-24V30V8,4W
-10 ÷ 50° C75°0,05 Kg
ALVIT | POWER SUPPLIES AND EMERGENCY LIGHTING MODULES FOR LED 10
ALIMENTATORI PER LED MADE IN ITALYLED power supply
ALR1035 ALR1050 ALR1070 ALR1012 ALR1024350mA, 1-7/8 LED 500mA, 1-4 LED 700mA, 1-4 LED 12V, 700mA 24V, 350mA
ALR10
> Versione a corrente costante per power LED> Versione a tensione costante per moduli LED> Grado di protezione , IP20> Morsetti a vite, 2,5mmq> Classe di isolamento, II> Protezione al cortocircuito, sovraccarico,
circuito aperto e termica > Elevato rendimento con minima dispersione
di calore ed assoluta affidabilità nel tempo> Conformità alle norme EN61347-2-13,
EN61347-1, EN62384, EN55015, EN61000-3-2, EN61547
> Constant current version for power LED> Constant voltage version for power LED> Degree protection, IP20> Screwable terminals connection, 2,5mmq> Class II protection> Short circuit, overload, open circuit and
thermal protection> High efficiency and absolute reliability> Complying with EN61347-2-13, EN61347-1,
EN62384, EN55015, EN61000-3-2,EN61547
Idoneo per funzionamento a range esteso 110-264V - 50/60Hzcon declassamento della potenza. Contattare l’ufficio tecnicoSuitable for operation at extended range 110-264V - 50/60Hz.Contact technical department.
SELV ALR1012
Corrente costante Tensione costanteConstant Current Constant Voltage
ALR1024ALR1035 ALR1070ALR1050
Tensione di alimentazione ACTensione di alimentazione DCFrequenza di alimentazioneCorrente di alimentazioneFattore di potenza
Massima corrente di uscitaTensione di uscitaMassima tensione a vuotoPotenza di uscita
Temp. ambiente massima TaTemperatura max sul punto TcPeso
Mains voltage ACMains voltage DCMains frequencyMains currentPower factor
Max output currentOutput voltageMax output voltageOutput power
Ambient temperature TaMax case temperature on TcWeight
220-240V176-264V 0 / 50/60 Hz150 mA0,85 C
1.200mA12V12V14,4W
-10 ÷ 50° C75°0,08 Kg
220-240V176-264V0 / 50/60 Hz150 mA0,85 C
1.200mA12V12V14,4W
-10 ÷ 50° C75°0,08 Kg
220-240V176-264V 0 / 50/60 Hz150 mA0,85 C
600mA24V24V14,4W
-10 ÷ 50° C75°0,08 Kg
220-240V176-264V0 / 50/60 Hz150 mA0,85 C
600mA24V24V14,4W
-10 ÷ 50° C75°0,08 Kg
220-240V176-264V 0 / 50/60 Hz120 mA0,85 C
350mA3-40V40V14W
-10 ÷ 50° C75°0,08 Kg
220-240V176-264V0 / 50/60 Hz120 mA0,85 C
350mA3-40V40V14W
-10 ÷ 50° C75°0,08 Kg
220-240V176-264V 0 / 50/60 Hz130 mA0,85 C
700mA3-20V20V14W
-10 ÷ 50° C75°0,08 Kg
220-240V176-264V0 / 50/60 Hz130 mA0,85 C
700mA3-20V20V14W
-10 ÷ 50° C75°0,08 Kg
220-240V176-264V 0 / 50/60 Hz150 mA0,85 C
500mA3-28V28V14W
-10 ÷ 50° C75°0,08 Kg
220-240V176-264V0 / 50/60 Hz150 mA0,85 C
500mA3-28V28V14W
-10 ÷ 50° C75°0,08 Kg
11ALVIT | POWER SUPPLIES AND EMERGENCY LIGHTING MODULES FOR LED
ALIMENTATORI PER LED MADE IN ITALYLED power supply
AL1435 AL1450 AL1470 AL1412 AL1424350mA, 2-12 LED 500mA, 2-8 LED 700mA, 2-6 LED 12V, 1.600mA 24V, 580mA
PFC PASSIVO - PASSIVE PFC
AL14 - IP65
> Alimentatore indipendente> Versione a corrente costante per power LED> Versione a tensione costante per moduli LED> Grado di protezione , IP65> Cavi H05RN-F> Morsetti a vite, 2,5mmq> Classe di isolamento, II> Protezione al cortocircuito, sovraccarico,
circuito aperto e termica > Elevato rendimento con minima dispersione
di calore ed assoluta affidabilità nel tempo> Conformità alle norme EN61347-2-13,
EN61347-1, EN62384, EN62384, EN55015,EN61000-3-2, EN61547
> Independent driver> Constant current version for power LED> Constant voltage version for power LED> Degree protection, IP65> Cables H05RN-F> Screwable terminals connection, 2,5mmq> Class II protection> Short circuit, overload, open circuit and
thermal protection> High efficiency and absolute reliability> Complying with EN61347-2-13, EN61347-1,
EN62384, EN55015, EN61000-3-2,EN61547
SELV AL1412-IP
Corrente costante Tensione costanteConstant Current Constant Voltage
AL1424-IPAL1435-IP AL1470-IPAL1450-IPIP65
Tensione di alimentazione ACTensione di alimentazione DCFrequenza di alimentazioneCorrente di alimentazioneFattore di potenza
Massima corrente di uscitaTensione di uscitaMassima tensione a vuotoPotenza di uscita
Temp. ambiente massima TaTemperatura max sul punto TcPeso
Mains voltage ACMains voltage DCMains frequencyMains currentPower factor
Max output currentOutput voltageMax output voltageOutput power
Ambient temperature TaMax case temperature on TcWeight
220-240V176-264V 0 / 50/60 Hz150 mA0,6 C
1.400mA12V12V16,8W
-10 ÷ 50° C75°0,08 Kg
220-240V 176-264V0 / 50/60 Hz150 mA0,6 C
1.400mA12V12V16,8W
-10 ÷ 50° C75°0,08 Kg
220-240V176-264V 0 / 50/60 Hz150 mA0,6 C
700mA24V24V16,8W
-10 ÷ 50° C75°0,08 Kg
220-240V 176-264V0 / 50/60 Hz150 mA0,6 C
700mA24V24V16,8W
-10 ÷ 50° C75°0,08 Kg
220-240V176-264V 0 / 50/60 Hz120 mA0,6 C
350mA3-46V50V16,8W
-10 ÷ 50° C75°0,08 Kg
220-240V176-264V0 / 50/60 Hz120 mA0,6 C
350mA3-46V50V16,8W
-10 ÷ 50° C75°0,08 Kg
220-240V176-264V 0 / 50/60 Hz130 mA0,6 C
700mA3-24V30V16,8W
-10 ÷ 50° C75°0,08 Kg
220-240V176-264V0 / 50/60 Hz130 mA0,6 C
700mA3-24V30V16,8W
-10 ÷ 50° C75°0,08 Kg
220-240V176-264V 0 / 50/60 Hz150 mA0,6 C
500mA3-33V35V16,8W
-10 ÷ 50° C75°0,08 Kg
220-240V176-264V0 / 50/60 Hz150 mA0,6 C
500mA3-33V35V16,8W
-10 ÷ 50° C75°0,08 Kg
ALVIT | POWER SUPPLIES AND EMERGENCY LIGHTING MODULES FOR LED 12
ALIMENTATORI PER LED MADE IN ITALYLED power supply
AL1535 AL1550 AL1570 AL1512 AL1524350mA, 2-12 LED 500mA, 2-8/9 LED 700mA, 2-6/7 LED 12V, 1.400mA 24V, 700mA
AL15
> Alimentatore indipendente> Versione a corrente costante per power LED> Versione a tensione costante per moduli LED> Grado di protezione , IP20> Morsetti a vite, 2,5mmq> Classe di isolamento, II> Protezione al cortocircuito, sovraccarico,
circuito aperto e termica > Elevato rendimento con minima dispersione
di calore ed assoluta affidabilità nel tempo> Conformità alle norme EN61347-2-13,
EN61347-1, EN62384, EN62384, EN55015,EN61000-3-2, EN61547
> Independent driver> Constant current version for power LED> Constant voltage version for power LED> Degree protection, IP20> Screwable terminals connection, 2,5mmq> Class II protection> Short circuit, overload, open circuit and
thermal protection> High efficiency and absolute reliability> Complying with EN61347-2-13, EN61347-1,
EN62384, EN55015, EN61000-3-2,EN61547
Idoneo per funzionamento a range esteso 110-264V - 50/60Hzcon declassamento della potenza. Contattare l’ufficio tecnicoSuitable for operation at extended range 110-264V - 50/60Hz.Contact technical department.
SELV AL1512
Corrente costante Tensione costanteConstant Current Constant Voltage
AL1524AL1535 AL1570AL1550
Tensione di alimentazione ACTensione di alimentazione DCFrequenza di alimentazioneCorrente di alimentazioneFattore di potenza
Massima corrente di uscitaTensione di uscitaMassima tensione a vuotoPotenza di uscita
Temp. ambiente massima TaTemperatura max sul punto TcPeso
Mains voltage ACMains voltage DCMains frequencyMains currentPower factor
Max output currentOutput voltageMax output voltageOutput power
Ambient temperature TaMax case temperature on TcWeight
220-240V176-264V 0 / 50/60 Hz150 mA>0,85 C
1.600mA12V12V19,2W
-10 ÷ 50° C75°0,08 Kg
220-240V176-264V0 / 50/60 Hz150 mA>0,85 C
1.600mA12V12V19,2W
-10 ÷ 50° C75°0,08 Kg
220-240V176-264V 0 / 50/60 Hz150 mA>0,85 C
800mA24V24V19,2W
-10 ÷ 50° C75°0,08 Kg
220-240V176-264V0 / 50/60 Hz150 mA>0,85 C
800mA24V24V19,2W
-10 ÷ 50° C75°0,08 Kg
220-240V176-264V 0 / 50/60 Hz150 mA>0,85 C
350mA3-54V55V19W
-10 ÷ 50° C75°0,08 Kg
220-240V176-264V0 / 50/60 Hz150 mA>0,85 C
350mA3-54V55V19W
-10 ÷ 50° C75°0,08 Kg
220-240V176-264V 0 / 50/60 Hz150 mA>0,85 C
700mA3-29V31V20W
-10 ÷ 50° C75°0,08 Kg
220-240V176-264V0 / 50/60 Hz150 mA>0,85 C
700mA3-29V31V20W
-10 ÷ 50° C75°0,08 Kg
220-240V176-264V 0 / 50/60 Hz150 mA>0,85 C
500mA3-40V41V20W
-10 ÷ 50° C75°0,08 Kg
220-240V176-264V0 / 50/60 Hz150 mA>0,85 C
500mA3-40V41V20W
-10 ÷ 50° C75°0,08 Kg
220-240V176-264V 0 / 50/60 Hz170 mA>0,85 C
1.000mA3-20V21V20W
-10 ÷ 50° C75°0,08 Kg
220-240V176-264V0 / 50/60 Hz170 mA>0,85 C
1A3-20V21V20W
-10 ÷ 50° C75°0,08 Kg
220-240V176-264V 0 / 50/60 Hz150 mA>0,85 C
400mA48V48V19,2W
-10 ÷ 50° C75°0,08 Kg
220-240V176-264V0 / 50/60 Hz150 mA>0,85 C
400mA48V48V19,2W
-10 ÷ 50° C75°0,08 Kg
13ALVIT | POWER SUPPLIES AND EMERGENCY LIGHTING MODULES FOR LED
ALIMENTATORI PER LED MADE IN ITALYLED power supply
AL2035 AL2050 AL2070 AL20100 AL2012 AL2024 AL2048350mA, 1-15/16 LED 500mA, 1-11/12 LED 700mA, 1-8 LED 1.000mA, 1-5 LED 12V, 1.600mA 24V, 800mA 48V, 400mA
PFC PASSIVO - PASSIVE PFC
AL20
SELV
AL2012
Corrente costante Tensione costanteConstant Current Constant Voltage
AL2024AL2035 AL2070AL2050 AL20100 AL2048
> Alimentatore indipendente> Rifasamento passivo> Versione a corrente costante per power LED> Versione a tensione costante per moduli LED> Grado di protezione , IP20> Morsetti a vite, 2,5mmq> Classe di isolamento, II> Protezione al cortocircuito, sovraccarico,
circuito aperto e termica > Elevato rendimento con minima dispersione di calore
ed assoluta affidabilità nel tempo> Conformità alle norme EN61347-2-13, EN61347-1,
EN62384, EN62384, EN55015, EN61000-3-2, EN61547
> Independent driver> Passive PFC> Constant current version for power LED> Constant voltage version for power LED> Degree protection, IP20> Screwable terminals connection, 2,5mmq> Class II protection> Short circuit, overload, open circuit and
thermal protection> High efficiency and absolute reliability> Complying with EN61347-2-13, EN61347-1,
EN62384, EN55015, EN61000-3-2, EN61547
ALVIT | POWER SUPPLIES AND EMERGENCY LIGHTING MODULES FOR LED 14
ALIMENTATORI PER LED MADE IN ITALYLED power supply
Tensione di alimentazione ACTensione di alimentazione DCFrequenza di alimentazioneCorrente di alimentazioneFattore di potenza
Massima corrente di uscitaTensione di uscitaMassima tensione a vuotoPotenza di uscita
Temp. ambiente massima TaTemperatura max sul punto TcPeso
Mains voltage ACMains voltage DCMains frequencyMains currentPower factor
Max output currentOutput voltageMax output voltageOutput power
Ambient temperature TaMax case temperature on TcWeight
AL16D
> Alimentatore indipendente> Versione multipotenza regolabile con
dip-switch, a corrente costante per powerLED o a tensione costante per moduli LED
> Dimmerabile DALI> Default DALI
- Power on: 100%- System fail level: 100%
> Grado di protezione , IP20> Morsetti a molla, 2,5mmq> Classe di isolamento, II> Protezione al cortocircuito, sovraccarico,
circuito aperto e termica > Elevato rendimento con minima dispersione
di calore ed assoluta affidabilità nel tempo> Conformità alle norme EN61347-2-13,
EN61347-1, EN62384, EN55015, EN61000-3-2, EN61547
> Independent driver> Multi-power adjustable version dip-switch,
constant current for power LED or constantvoltage for LED modules
> DALI dimmable> Default DALI
- Power on: 100%- System fail level: 100%
> Degree protection, IP20> Screwless terminals connection, 2,5mmq> Class II protection> Short circuit, overload, open circuit and
thermal protection> High efficiency and absolute reliability> Complying with EN61347-2-13, EN61347-1,
EN62384, EN55015, EN61000-3-2,EN61547
SELV
220-240V176-264V 0 / 50/60 Hz80mA0,85 C
350mA3-43V48V16,8W
-10 ÷ 50° C75°0,05 Kg
220-240V176-264V0 / 50/60 Hz80mA0,85 C
350mA3-43V48V16,8W
-10 ÷ 50° C75°0,05 Kg
220-240V176-264V 0 / 50/60 Hz90mA0,85 C
700mA3-24V24,5V16,8W
-10 ÷ 50° C75°0,05 Kg
220-240V176-264V0 / 50/60 Hz90mA0,85 C
700mA3-24V24,5V16,8W
-10 ÷ 50° C75°0,05 Kg
350mA 700mA
220-240V176-264V 0 / 50/60 Hz90mA0,85 C
500mA3-33V36V16,8W
-10 ÷ 50° C75°0,05 Kg
220-240V176-264V0 / 50/60 Hz90mA0,85 C
500mA3-33V36V16,8W
-10 ÷ 50° C75°0,05 Kg
500mA
Multicorrente&MultitensioneMulticurrent&Multivoltage
350mA 1-12 LED, 500mA 1-8 LED, 700mA 1-6 LED, 12V, 24V
PFC PASSIVO - PASSIVE PFC
220-240V176-264V 0 / 50/60 Hz45mA0,85 C
700mA12V12,58,4W
-10 ÷ 50° C75°0,05 Kg
220-240V176-264V0 / 50/60 Hz45mA0,85 C
700mA12V12,58,4W
-10 ÷ 50° C75°0,05 Kg
12V
Corrente costante Tensione costanteConstant Current Constant Voltage
24V
220-240V176-264V 0 / 50/60 Hz90mA0,85 C
700mA24V24,516,8W
-10 ÷ 50° C75°0,05 Kg
220-240V176-264V0 / 50/60 Hz90mA0,85 C
700mA24V24,516,8W
-10 ÷ 50° C75°0,05 Kg
Tabella dip-switchDIP-Switch table
Sec 1 2 3 416,8W 350mA - - - -16,8W 500mA ON - ON -16,8W 700mA ON ON - ON8,4W 12V ON ON ON ON16,8W 24V ON ON - ON
15ALVIT | POWER SUPPLIES AND EMERGENCY LIGHTING MODULES FOR LED
ALIMENTATORI PER LED MADE IN ITALYLED power supply
ALT35
> Alimentatore indipendente> Rifasamento attivo> Versione a corrente costante per power LED> Versione a tensione costante per moduli LED> Grado di protezione , IP20> Morsetti, 2,5mmq> Protezione al cortocircuito, sovraccarico,
circuito aperto e termica > Elevato rendimento con minima dispersione
di calore ed assoluta affidabilità nel tempo> Conformità alle norme EN61347-2-13,
EN61347-1, EN62384, EN62384, EN55015,EN61000-3-2, EN61547
> Independent driver> Attive PFC> Constant current version for power LED> Constant voltage version for power LED> Degree protection, IP20> Screwable terminals connection, 2,5mmq> Class II protection> Short circuit, overload, open circuit and
thermal protection> High efficiency and absolute reliability> Complying with EN61347-2-13, EN61347-1,
EN62384, EN55015, EN61000-3-2,EN61547
SELV
Tensione di alimentazione ACTensione di alimentazione DCFrequenza di alimentazioneCorrente di alimentazioneFattore di potenza
Massima corrente di uscitaTensione di uscitaMassima tensione a vuotoPotenza di uscita
Temp. ambiente massima TaTemperatura max sul punto TcPeso
Mains voltage ACMains voltage DCMains frequencyMains currentPower factor
Max output currentOutput voltageMax output voltageOutput power
Ambient temperature TaMax case temperature on TcWeight
220-240V176-264V 0 / 50/60 Hz200mA>0,9
500mA6-48V50V25W
-10 ÷ 50° C75°T.B.D.
220-240V176-264V0 / 50/60 Hz200mA>0,9
500mA6-48V50V25W
-10 ÷ 50° C75°T.B.D.
220-240V176-264V 0 / 50/60 Hz250mA>0,9
1.050mA6-33V35V35W
-10 ÷ 50° C75°T.B.D.
220-240V176-264V0 / 50/60 Hz250mA>0,9
1.050mA6-33V35V35W
-10 ÷ 50° C75°T.B.D.
ALT3550 ALT35100
220-240V176-264V 0 / 50/60 Hz250mA>0,9
700mA6-48V50V33,6W
-10 ÷ 50° C75°T.B.D.
220-240V176-264V0 / 50/60 Hz250mA>0,9
700mA6-48V50V33,6W
-10 ÷ 50° C75°T.B.D.
ALT3570
220-240V176-264V 0 / 50/60 Hz200mA>0,9
2.000mA12V12V24W
-10 ÷ 50° C75°T.B.D.
220-240V176-264V0 / 50/60 Hz200mA>0,9
2.000mA12V12V24W
-10 ÷ 50° C75°T.B.D.
ALT3512
Corrente costante
ALT3524
220-240V176-264V 0 / 50/60 Hz250mA>0,9
1.400mA24V24V33,6W
-10 ÷ 50° C75°T.B.D.
220-240V176-264V0 / 50/60 Hz250mA>0,9
1.400mA24V24V33,6W
-10 ÷ 50° C75°T.B.D.
Tensione costante
ALT3548
220-240V176-264V 0 / 50/60 Hz250mA>0,9
700mA48V48V33W
-10 ÷ 50° C75°T.B.D.
220-240V176-264V0 / 50/60 Hz250mA>0,9
700mA48V48V33W
-10 ÷ 50° C75°T.B.D.
ALT3550 ALT3570 ALT35100 ALT3512 ALT3524 ALT3548500mA, 25W 700mA, 33,6W 1.050mA, 35W 12V, 3.000mA 24V, 1.400mA 48V, 700mA
PFC ATTIVO - ACTIVE PFC
Idoneo per funzionamento a range esteso 90-264V - 50/60Hzcon declassamento della potenza. Contattare l’ufficio tecnicoSuitable for operation at extended range 90-264V - 50/60Hz.Contact technical department.
ALVIT | POWER SUPPLIES AND EMERGENCY LIGHTING MODULES FOR LED 16
ALIMENTATORI PER LED MADE IN ITALYLED power supply
AL35D
> Alimentatore indipendente> Rifasamento attivo> Versione multipotenza regolabile con dip-switch,
a corrente costante per power LED o a tensione costante per moduli LED
> Dimmerabile DALI> Grado di protezione , IP20> Morsetti, 2,5mmq> Classe di isolamento, II> Protezione al cortocircuito, sovraccarico,
circuito aperto e termica > Elevato rendimento con minima dispersione di calore ed
assoluta affidabilità nel tempo> Conformità alle norme EN61347-2-13, EN61347-1,
EN62384, EN62384, EN55015, EN61000-3-2, EN61547
> Independent driver> Attive PFC> Multi-power adjustable version dip-switch,
constant current for power LED or constant voltage for LED modules
> DALI dimmable> Degree protection, IP20> Screwable terminals connection, 2,5mmq> Class II protection> Short circuit, overload, open circuit and
thermal protection> High efficiency and absolute reliability> Complying with EN61347-2-13, EN61347-1,
EN62384, EN55015, EN61000-3-2, EN61547
Multicorrente&Multitensione DALIMulticurrent&Multivoltage DALI
500mA 1-15 LED, 700mA 1-15 LED, 800mA 1-13 LED, 1.050mA 1-10 LED, 12V, 24V, 48V
PFC ATTIVO - ACTIVE PFC
SELV
Tensione di alimentazione ACTensione di alimentazione DCFrequenza di alimentazioneCorrente di alimentazioneFattore di potenza
Massima corrente di uscitaTensione di uscitaMassima tensione a vuotoPotenza di uscita
Temp. ambiente massima TaTemperatura max sul punto TcPeso
Mains voltage ACMains voltage DCMains frequencyMains currentPower factor
Max output currentOutput voltageMax output voltageOutput power
Ambient temperature TaMax case temperature on TcWeight
220-240V176-264V 0 / 50/60 Hz250mA>0,9
700mA6-48V50V35W
-10 ÷ 50° C75°T.B.D.
220-240V176-264V0 / 50/60 Hz250mA>0,9
700mA6-48V50V35W
-10 ÷ 50° C75°T.B.D.
220-240V176-264V 0 / 50/60 Hz250mA>0,9
1.050mA6-33V35V35W
-10 ÷ 50° C75°T.B.D.
220-240V176-264V0 / 50/60 Hz250mA>0,9
1.050mA6-33V35V35W
-10 ÷ 50° C75°T.B.D.
700mA 1.050mA
220-240V176-264V 0 / 50/60 Hz250mA>0,9
800mA6-42V50V35W
-10 ÷ 50° C75°T.B.D.
220-240V176-264V0 / 50/60 Hz250mA>0,9
800mA6-42V50V35W
-10 ÷ 50° C75°T.B.D.
800mA
220-240V176-264V 0 / 50/60 Hz150mA>0,9
1.050mA12V12V12,6W
-10 ÷ 50° C75°T.B.D.
220-240V176-264V0 / 50/60 Hz150mA>0,9
1.050mA12V12V12,6W
-10 ÷ 50° C75°T.B.D.
12V
Corrente costante
24V
220-240V176-264V 0 / 50/60 Hz200mA>0,9
1.050mA24V24,5V25W
-10 ÷ 50° C75°T.B.D.
220-240V176-264V0 / 50/60 Hz200mA>0,9
1.050mA24V24,5V25W
-10 ÷ 50° C75°T.B.D.
Tensione costante
48V
220-240V176-264V 0 / 50/60 Hz250mA>0,9
700mA48V48,5V33W
-10 ÷ 50° C75°T.B.D.
220-240V176-264V0 / 50/60 Hz250mA>0,9
700mA48V48,5V33W
-10 ÷ 50° C75°T.B.D.
220-240V176-264V 0 / 50/60 Hz200mA>0,9
500mA6-48V50V24W
-10 ÷ 50° C75°T.B.D.
220-240V176-264V0 / 50/60 Hz200mA>0,9
500mA6-48V50V24W
-10 ÷ 50° C75°T.B.D.
500mA
Idoneo per funzionamento a range esteso 90-264V - 50/60Hzcon declassamento della potenza. Contattare l’ufficio tecnicoSuitable for operation at extended range 90-264V - 50/60Hz.Contact technical department.
17ALVIT | POWER SUPPLIES AND EMERGENCY LIGHTING MODULES FOR LED
ALIMENTATORI PER LED MADE IN ITALYLED power supply
AL35P
> Alimentatore indipendente> Rifasamento attivo> Versione multipotenza regolabile con dip-switch,
a corrente costante per power LED o a tensione costante per moduli LED
> Dimmerabile Push 0-10V o 1-10V> Grado di protezione , IP20> Morsetti, 2,5mmq> Classe di isolamento, II> Protezione al cortocircuito, sovraccarico,
circuito aperto e termica > Elevato rendimento con minima dispersione di calore ed
assoluta affidabilità nel tempo> Conformità alle norme EN61347-2-13, EN61347-1,
EN62384, EN62384, EN55015, EN61000-3-2, EN61547
> Independent driver> Attive PFC> Multi-power adjustable version dip-switch,
constant current for power LED or constant voltage for LED modules
> DALI dimmable> Degree protection, IP20> Screwable terminals connection, 2,5mmq> Class II protection> Short circuit, overload, open circuit and
thermal protection> High efficiency and absolute reliability> Complying with EN61347-2-13, EN61347-1,
EN62384, EN55015, EN61000-3-2, EN61547
Multicorrente&Multitensione Push 1-10VMulticurrent&Multivoltage Push 1-10V
500mA 1-15 LED, 700mA 1-15 LED, 800mA 1-13 LED, 1.050mA 1-10 LED, 12V, 24V, 48V
PFC ATTIVO - ACTIVE PFC
SELV
Tensione di alimentazione ACTensione di alimentazione DCFrequenza di alimentazioneCorrente di alimentazioneFattore di potenza
Massima corrente di uscitaTensione di uscitaMassima tensione a vuotoPotenza di uscita
Temp. ambiente massima TaTemperatura max sul punto TcPeso
Mains voltage ACMains voltage DCMains frequencyMains currentPower factor
Max output currentOutput voltageMax output voltageOutput power
Ambient temperature TaMax case temperature on TcWeight
220-240V176-264V 0 / 50/60 Hz250mA>0,9
700mA6-48V50V35W
-10 ÷ 50° C75°T.B.D.
220-240V176-264V0 / 50/60 Hz250mA>0,9
700mA6-48V50V35W
-10 ÷ 50° C75°T.B.D.
220-240V176-264V 0 / 50/60 Hz250mA>0,9
1.050mA6-33V35V35W
-10 ÷ 50° C75°T.B.D.
220-240V176-264V0 / 50/60 Hz250mA>0,9
1.050mA6-33V35V35W
-10 ÷ 50° C75°T.B.D.
700mA 1.050mA
220-240V176-264V 0 / 50/60 Hz250mA>0,9
800mA6-42V50V35W
-10 ÷ 50° C75°T.B.D.
220-240V176-264V0 / 50/60 Hz250mA>0,9
800mA6-42V50V35W
-10 ÷ 50° C75°T.B.D.
800mA
220-240V176-264V 0 / 50/60 Hz150mA>0,9
1.050mA12V12V12,6W
-10 ÷ 50° C75°T.B.D.
220-240V176-264V0 / 50/60 Hz150mA>0,9
1.050mA12V12V12,6W
-10 ÷ 50° C75°T.B.D.
12V
Corrente costante
24V
220-240V176-264V 0 / 50/60 Hz200mA>0,9
1.050mA24V24,5V25W
-10 ÷ 50° C75°T.B.D.
220-240V176-264V0 / 50/60 Hz200mA>0,9
1.050mA24V24,5V25W
-10 ÷ 50° C75°T.B.D.
Tensione costante
48V
220-240V176-264V 0 / 50/60 Hz250mA>0,9
700mA48V48,5V33W
-10 ÷ 50° C75°T.B.D.
220-240V176-264V0 / 50/60 Hz250mA>0,9
700mA48V48,5V33W
-10 ÷ 50° C75°T.B.D.
220-240V176-264V 0 / 50/60 Hz200mA>0,9
500mA6-48V50V24W
-10 ÷ 50° C75°T.B.D.
220-240V176-264V0 / 50/60 Hz200mA>0,9
500mA6-48V50V24W
-10 ÷ 50° C75°T.B.D.
500mA
Idoneo per funzionamento a range esteso 90-264V - 50/60Hzcon declassamento della potenza. Contattare l’ufficio tecnicoSuitable for operation at extended range 90-264V - 50/60Hz.Contact technical department.
ALVIT | POWER SUPPLIES AND EMERGENCY LIGHTING MODULES FOR LED 18
ALIMENTATORI PER LED MADE IN ITALYLED power supply
Tensione di alimentazioneTensione massima ammessaCorrente di alimentazioneRendimento
Corrente di uscita Massima tensione a vuotoPotenza di uscita
Temp. ambiente TaTemperatura max sul punto TcPeso
Mains voltageMaximum voltage allowedMains currentEfficiency
Max output currentMax output voltageOutput power
Ambient temperature TaMax case temperature on TcWeight
LED collegabili in base alla tensione di ingressoLED connected according to input voltage
V in LED 350mA LED 500mA LED 700mA12V 1÷3 1÷3 1÷2/324V 1÷6 1÷6 1÷5/648V 1÷12 1÷12 1÷11/12
CL24mini
> Da utilizzare con circuiti SELV> Dimmerabile a 2 fili con segnale Vin modulato
direttamente su linea + e - di ingresso> Dimmerabile a 3 fili con Pin dimming dedicato
compatibile TTL> Protezioni in ingresso: anti-inversione, sovra-
tensione, fusibile> Protezioni in uscita: cortocircuito, sovraccarico,
circuito aperto e termica > Fori ø 2mm per fissaggio a vite> Elevato rendimento con minima dispersione di
calore ed assoluta affidabilità nel tempo> Conformità alle norme EN61347-2-13,
EN61347-1, EN55015, EN61000-3-2,EN62384, SELV
> Use with SELV> Dimmable 2-wire signal line, directly modula-
ted Vin + and - input> Pin 3 wire dimmer dimming dedicated TTL
compatible> Input protections: reverse polarity, surge, fuse> Output protections: short circuit, overload,
open circuit and thermal> 2mm ø holes for screw fixing > High efficiency and absolute reliability> Complying with EN61347-2-13, EN61347-1,
EN55015, EN61000-3-2, EN62384, SELV
12-48V DC52V DC350mA Max95% η
350mACome Vin16W
-10 ÷ +50° C70°0,008 Kg
12-48V DC52V DC350mA Max95% η
350mALike Vin16W
-10 ÷ +50° C70°0,008 Kg
CL24 mini 35
tc
Corrente costanteCostant Current
CL24 mini 50 CL24 mini 70
350mA 500mA 700mA
12-48V DC52V DC500mA Max95% η
500mACome Vin22,5W
-10 ÷ +50° C70°0,008 Kg
12-48V DC52V DC500mA Max95% η
500mALike Vin22,5W
-10 ÷ +50° C70°0,008 Kg
12-48V DC52V DC700mA Max95% η
700mACome Vin31,5W
-10 ÷ +50° C70°0,008 Kg
12-48V DC52V DC700mA Max95% η
700mALike Vin31,5W
-10 ÷ +50° C70°0,008 Kg
19ALVIT | POWER SUPPLIES AND EMERGENCY LIGHTING MODULES FOR LED
ALIMENTATORI PER LED MADE IN ITALYLED power supply
Tensione di alimentazioneTensione massima ammessaCorrente di alimentazioneRendimento
Corrente di uscita regolabile con dip-switchMassima tensione a vuotoPotenza di uscita
Temp. ambiente TaTemperatura max sul punto TcPeso
Mains voltageMaximum voltage allowedMains currentEfficiency
Max output currentMax output voltageOutput power
Ambient temperature TaMax case temperature on TcWeight
LED collegabili in base alla tensione di ingressoLED connected according to input voltage
V in LED 350mA LED 500mA LED 700mA12V 1÷3 1÷3 1÷2/324V 1÷6 1÷6 1÷5/648V 1÷12 1÷12 1÷12
CL24dim
> Alimentatore indipendente> Versione multipotenza regolabile con
dip-switch, a corrente costante per power LED > Dimmerabile a 2 fili con segnale Vin modulato
direttamente su linea + e - di ingresso> Grado di protezione , IP20> Morsetti a vite, 2,5mmq> Classe di isolamento, III
da utilizzare con circuiti SELV> Protezione al cortocircuito, sovraccarico,
circuito aperto e termica > Elevato rendimento con minima dispersione di
calore ed assoluta affidabilità nel tempo> Conformità alle norme EN61347-2-13,
EN61347-1, EN55015, EN61000-3-2, SELV
> Independent driver> Multi-power adjustable version dip-switch,
constant current to power LED > Dimmable 2-wire signal line, directly modula-
ted Vin + and - input> Degree protection, IP20> Screwless terminals connection, 2,5mmq> Class III protection, use with SELV> Short circuit, overload, open circuit and
thermal protection> High efficiency and absolute reliability> Complying with EN61347-2-13, EN61347-1,
EN55015, EN61000-3-2, SELV
12÷ 48V DC52V DC700mA Max95% η
350mA, 500mA, 700mACome tensione di ingresso31,5W Max
-10 ÷ +50° C70°0,05 Kg
12-48V DC52V DC700mA Max95% η
350mA, 500mA, 700mACome tensione di ingresso31,5W Max
-10 ÷ +50° C70°0,05 Kg
MulticorrenteMulticurrent
ALVIT | POWER SUPPLIES AND EMERGENCY LIGHTING MODULES FOR LED 20
ALIMENTATORI PER LED MADE IN ITALYLED power supply
Tensione di alimentazioneTensione massima ammessaCorrente di alimentazioneRendimento
CanaliCorrente di uscita regolabile con dip-switchMassima tensione a vuotoPotenza di uscita
Temp. ambiente TaTemperatura max sul punto TcPeso
Mains voltageMaximum voltage allowedMains currentEfficiency
ChannelsMax output currentMax output voltageOutput power
Ambient temperature TaMax case temperature on TcWeight
LED collegabili in base alla tensione di ingressoLED connected according to input voltage
V in LED 350mA LED 500mA LED 700mA12V 1÷3 1÷3 1÷2/324V 1÷6 1÷6 1÷5/6
CL24D
> Alimentatore indipendente> Versione multipotenza regolabile con
dip-switch, a corrente costante per power LED > Dimmerabile DALI> Grado di protezione , IP20> Morsetti a vite, 2,5mmq> Classe di isolamento, III
da utilizzare con circuiti SELV> Protezione al cortocircuito, sovraccarico,
circuito aperto e termica > Elevato rendimento con minima dispersione di
calore ed assoluta affidabilità nel tempo> Conformità alle norme EN61347-2-13,
EN61347-1, EN55015, EN61000-3-2, SELV
> Independent driver> DALI dimmable> Multi-power adjustable version dip-switch,
constant current to power LED > Degree protection, IP20> Screwless terminals connection, 2,5mmq> Class III protection, use with SELV> Short circuit, overload, open circuit and
thermal protection> High efficiency and absolute reliability> Complying with EN61347-2-13, EN61347-1,
EN55015, EN61000-3-2, SELV
12÷ 24V DC30V DC
700mA Max95% η
CH 1 CH 2350/500/700mA 350/500/700mA
Come V in Come V in16,8W Max 16,8W Max
-10 ÷ +50° C70°
0,05 Kg
12÷ 24V DC30V DC
700mA Max95% η
CH 1 CH 2350/500/700mA 350/500/700mA
Come V in Come V in16,8W Max 16,8W Max
-10 ÷ +50° C70°
0,05 Kg
Multicorrente DALI a due canaliTwo channel DALI Multicurrent
PRELIMINARE - PRELIMINARY
97
21ALVIT | POWER SUPPLIES AND EMERGENCY LIGHTING MODULES FOR LED
ALIMENTATORI PER LED MADE IN ITALYLED power supply
Tensione di alimentazioneTensione massima ammessaCorrente di alimentazione
Temp. ambiente TaTemperatura max sul punto TcPeso
Mains voltageMaximum voltage allowedMains current
Ambient temperature TaMax case temperature on TcWeight
CLon-off
> Dispositivo per l’accensione e lo spegnimentograduale dei LED abbinati a driver in tensione
> Accensione e spegnimento tramite contatto pulito> Tempo della rampa, 500ms> Regolazione dell’intervallo di tempo tra l’impulso
On e la rampa di accensione da 0,8s a 1,1s > Regolazione dell’intervallo di tempo tra
l’impulso Off e la rampa di spegnimento da 2s a 5s
> Grado di protezione , IP20> Device for for gradual switching on and off of the
LEDs in combination with voltage drivers> Switching on and off by free contact> Ramp time, 500ms> Adjusting interval time between power on
and ramp, from 0,8s to 1,1s> Adjusting interval time between power off
and ramp from 2s to 5s> Degree protection, IP20
12V DC15V DC2.000mA Max
-10 ÷ +50° C70°0,05 Kg
12V DC15V DC2.000mA Max
-10 ÷ +50° C70°0,05 Kg
Soft start&stop per driver LED in tensioneSoft start&stop for voltage LED driver
23ALVIT | POWER SUPPLIES AND EMERGENCY LIGHTING MODULES FOR LED
Illuminazione d’emergenzaEmergency lighting modules
ILLUMINAZIONE D’EMERGENZA MADE IN ITALYEmergency lighting modules
ALVIT | POWER SUPPLIES AND EMERGENCY LIGHTING MODULES FOR LED 24
> Funzionamento combinato sia in luce continua che in sola emergenza > Idonea per LED di potenza (7-10V x 300mA) > Intervento istantaneo ad ogni mancanza di rete> Batterie al Ni-Mh “alta temperatura”> Indicatore di ricarica a led > Dispositivo di protezione contro le scariche prolungate> Conformità alle norme EN61347-2-13, EN61347-2-7, EN61547, EN55015,
EN61000-3-2, SELV
> Combined electronic ballast and emergency lighting module> Suitable for power LED (7-10V x 300mA) > Automatic operation> High temperature Ni-Mh batteries> Charge indicator with led> Protection device against extensive discharge> Conformità alle norme EN61347-2-13, EN61347-2-7, EN61547, EN55015,
EN61000-3-2, SELV
220-240V – 50/60 Hz40 mA - 0,6
70°C0 ÷ 40° C
24 h2 m
1,5 mm2120mm350mm
ø 8.8mm
220-240V – 50/60 Hz40 mA - 0,6
70°0 ÷ 40° C
24 h2 m
1,5 mmq120mm350mm
ø 8.8mm
Tensione di alimentazione:Corrente di alimentazione:Temp. max d’esercizio misurata sull’involucro:Temperatura ambiente:Tempo di ricarica:Distanza max tra alimentatore e lampada:Portata morsettiera:Lunghezza cavo batterie:Lunghezza cavo led:Foro di montaggio led:
Supply Voltage:Supply current:Max case temperature:Ambient temperature:Recharging time:Max distance between inverter and lamp:Screwless terminals max connection size:Length battery cable:Length led cable:Led mounting hole:
DIMENSIONI COMPATTECompact dimension
L10microElectronic unit | 0,70Kg
SELV
3,6V - 1,1Ah | 0,20 Kg Mod. L 1031
model LED battery V-Ah autonomy h EBLF % weight g
L 10317-10V x 300mA 3,6 - 1,1 1 30 270CONSTANT CURRENT POWER LED
ILLUMINAZIONE D’EMERGENZA MADE IN ITALYEmergency lighting modules
model LED battery V-Ah autonomy h EBLF % weight g
L 12411 x 350mA 4,8 - 1,6 4 80 270
2 x 350mA 4,8 - 1,6 3 80 270
3 x 350mA 4,8 - 1,6 2 80 270
12V x 300mA 4,8 - 1,6 1 100 270
12V x 150mA 4,8 - 1,6 2 100 270
12V x 100mA 4,8 - 1,6 3 100 270
model LED battery V-Ah autonomy h EBLF % weight g
L 24711 x 350mA 7,2 - 1,6 8 80 370
2 x 350mA 7,2 - 1,6 6 80 370
3 x 350mA 7,2 - 1,6 4 80 370
4 x 350mA 7,2 - 1,6 3 80 370
24V x 150mA 7,2 - 1,6 2 100 370
24V x 75mA 7,2 - 1,6 3 100 370
24V x 50mA 7,2 - 1,6 5 100 370
97
> Funzionamento combinato sia in luce continua che in sola emergenza > Idonei per LED di potenza (max 4 LED x 1W) o moduli LED (12V o 24V)> Intervento istantaneo ad ogni mancanza di rete> Batterie al Ni-Cd “alta temperatura”> Indicatore di ricarica a led > Dispositivo di protezione contro le scariche prolungate> Possibilità di inibizione in Modo Riposo con telecomando esterno centralizzato> Possibilità di autodiagnosi a microprocessore integrato> Conformità alle norme EN61347-2-13, EN61347-2-7, EN61547, EN55015,
EN60598-2-22, EN61000-3-2, SELV
> Combined electronic ballast and emergency lighting module> Suitable for power LED (max 4 LED x 1W) or LED modules (12 V/ 24V)> Automatic operation> High temperature Ni-Cd batteries> Charge indicator with led> Protection device against extensive discharge> Rest mode facility with remot control device> Self diagnosis system with internal module, optional> Conformità alle norme EN61347-2-13, EN61347-2-7, EN61547, EN55015,
EN60598-2-22, EN61000-3-2, SELV
220-240V – 50/60 Hz40 mA - 0,6
70°C0 ÷ 40° C
24 h2 m
1,5 mm2280mm350mm
ø 8.8mm
220-240V – 50/60 Hz40 mA - 0,6
70°0 ÷ 40° C
24 h2 m
1,5 mmq280mm350mm
ø 8.8mm
Tensione di alimentazione:Corrente di alimentazione:Temp. max d’esercizio misurata sull’involucro:Temperatura ambiente:Tempo di ricarica:Distanza max tra alimentatore e lampada:Portata morsettiera:Lunghezza cavo batterie:Lunghezza cavo led:Foro di montaggio led:
Supply Voltage:Supply current:Max case temperature:Ambient temperature:Recharging time:Max distance between inverter and lamp:Screwless terminals max connection size:Length battery cable:Length led cable:Led mounting hole:
DIMENSIONI COMPATTECompact dimension
L12 - L24Electronic unit | 0,70Kg
SELV
CONSTANT CURRENT POWER LED
CONSTANT VOLTAGE LED MODULES
CONSTANT CURRENT POWER LED
CONSTANT VOLTAGE LED MODULES
4,8V - 1,6Ah | 0,20 Kg Mod. L 4141 - L1041 - L2441
7,2V - 1,6Ah | 0,30 Kg Mod. L 4171 - L1071 - L2471
Battery
25ALVIT | POWER SUPPLIES AND EMERGENCY LIGHTING MODULES FOR LED
ILLUMINAZIONE D’EMERGENZA MADE IN ITALYEmergency lighting modules
ALVIT | POWER SUPPLIES AND EMERGENCY LIGHTING MODULES FOR LED 26
EL60
> Funzionamento in sola emergenza > Funzionamento in luce continua in abbinamento con alimentatori elettronici,
elettronici dimmerabili> Versione multipotenza regolabile con dip-switch, per power LED a corrente
costante o per moduli LED a tensione costante > Intervento istantaneo ad ogni mancanza di rete> Batterie al Ni-Cd “alta temperatura”> Indicatore di ricarica a LED > Dispositivo di protezione contro le scariche prolungate> Possibilità di inibizione in Modo Riposo con telecomando esterno centralizzato> Possibilità di autodiagnosi con modulo integrato, a richiesta> Conformità alle norme EN61347-2-13, EN61347-2-7, EN61547, EN55015,
EN60598-2-22, EN61000-3-2, SELV> Maintained or non maintained operation> Suitable for electronic driver, dimmable electronic driver> Multi-power adjustable version dip-switch, constant current or constant voltage
to power LED to LED modules> Automatic operation> High temperature Ni-Cd batteries> Charge indicator with led> Protection device against extensive discharge> Rest mode facility with remot control device> Self diagnosis system with internal module, optional> Conformità alle norme EN61347-2-13, EN61347-2-7, EN61547, EN55015,
EN60598-2-22, EN61000-3-2, SELV
220/240V – 50/60 Hz20 mA - 0,6
70°C0 ÷ 50° C
24 h2 m
1,5 mm2280mm350mm
ø 8.8mm
220/240V – 50/60 Hz20 mA - 0,6
70°0 ÷ 50° C
24 h2 m
1,5 mmq280mm350mm
ø 8.8mm
Tensione di alimentazione:Corrente di alimentazione:Temp. max d’esercizio misurata sull’involucro:Temperatura ambiente:Tempo di ricarica:Distanza max tra alimentatore e lampada:Portata morsettiera:Lunghezza cavo batterie:Lunghezza cavo led:Foro di montaggio led:
Supply Voltage:Supply current:Max case temperature:Ambient temperature:Recharging time:Max distance between inverter and lamp:Screwless terminals max connection size:Length battery cable:Length led cable:Led mounting hole:
EL6071 - 7,2V - 1,6Ah | 0,30 Kg
Electronic unit | 0,130Kg
EL6074/3 - 7,2V - 4Ah | 0,75 Kg
ESEMPIO:in posizione A posso collegare 3 LED con VF 3,5V oppure 1 LED con VF10V;oppure una striscia LED da 12V max 24Win posizione B posso collegare 6 LED con VF 3,7V oppure 2 LED con VF10V;oppure una striscia LED da 24V max 30Win posizione C posso collegare 12 LED con VF 3,7V oppure 4 LED con VF10V;in posizione D posso collegare 18 LED con VF 3,2V oppure 3 LED con VF17V.
EXAMPLE: A position, can connect 3 LED with VF 3,5V or 1 LED VF10V, or a strip LED 12V - 24W max B position, can connect 6 LED with VF 3.7V or 2 LED VF10V, or a strip LED 24V - 30W max C position, can connec 12 LED VF 3.7 V or 4 LED VF10V; D position, can connect 18 LED VF 3.2 V or 3 LED VF17V.
Posizione tensione di lavoro Corrente di uscita Numero max Potenza max EBLFDip-switch in emergenza - (VL) in emergenza - (I) di power LED per moduli LED
in corrente in tensione
A 9-12V 350-300mA NLED=12 / VF 24W TBDB 9-24V 350-250mA NLED=24 / VF 30W TBDC 9-46V 350-125mA NLED=46 / VF - TBDD 9-58V 350-100mA NLED=58 / VF - TBD
EL6071 - 1 hour duration
Posizione tensione di lavoro Corrente di uscita Numero max Potenza max EBLFDip-switch in emergenza - (VL) in emergenza - (I) di power LED per moduli LED
in corrente in tensione
A 9-12V 350-300mA NLED=12 / VF 24W TBDB 9-24V 350-250mA NLED=24 / VF 30W TBDC 9-46V 350-125mA NLED=46 / VF - TBDD 9-58V 350-100mA NLED=58 / VF - TBD
EL6074/3 - 3 hour duration
Collegabili ad alimentatori con:> tensione massima in uscita 90V> corrente massima in uscita 2A
Connected to power supplies:> 90V maximum output voltage> 2A maximum output current
DIMENSIONI COMPATTECompact dimension
SELV
ILLUMINAZIONE D’EMERGENZA MADE IN ITALYEmergency lighting modules
220/240V – 50/60 Hz20 mA - 0,6
70°C0 ÷ 50° C
24 h2 m
1,5 mm2280mm350mm
ø 8.8mm
220/240V – 50/60 Hz20 mA - 0,6
70°0 ÷ 50° C
24 h2 m
1,5 mmq280mm350mm
ø 8.8mm
Tensione di alimentazione:Corrente di alimentazione:Temp. max d’esercizio misurata sull’involucro:Temperatura ambiente:Tempo di ricarica:Distanza max tra alimentatore e lampada:Portata morsettiera:Lunghezza cavo batterie:Lunghezza cavo led:Foro di montaggio led:
Supply Voltage:Supply current:Max case temperature:Ambient temperature:Recharging time:Max distance between inverter and lamp:Screwless terminals max connection size:Length battery cable:Length led cable:Led mounting hole:
BASSO PROFILOLow profile
ELT60
ELT6071 - 7,2V - 1,6Ah | 0,30 Kg
ELT6074/3 - 2 x 3,6V - 4Ah | 0,84 Kg
Electronic unit | 0,130Kg
SELV
> Funzionamento in sola emergenza > Funzionamento in luce continua in abbinamento con alimentatori elettronici,
elettronici dimmerabili> Versione multipotenza regolabile con dip-switch, per power LED a corrente
costante o per moduli LED a tensione costante > Intervento istantaneo ad ogni mancanza di rete> Batterie al Ni-Cd “alta temperatura”> Indicatore di ricarica a LED > Dispositivo di protezione contro le scariche prolungate> Possibilità di inibizione in Modo Riposo con telecomando esterno centralizzato> Sistema di autodiagnosi con modulo esterno a microprocessore> Conformità alle norme EN61347-2-13, EN61347-2-7, EN61547, EN55015,
EN60598-2-22, EN61000-3-2, SELV> Maintained or non maintained operation> Suitable for electronic driver, dimmable electronic driver> Multi-power adjustable version dip-switch, constant current or constant voltage
to power LED to LED modules> Automatic operation> High temperature Ni-Cd batteries> Charge indicator with led> Protection device against extensive discharge> Rest mode facility with remot control device> Self diagnosis system with external module> Conformità alle norme EN61347-2-13, EN61347-2-7, EN61547, EN55015,
EN60598-2-22, EN61000-3-2, SELV
ESEMPIO:in posizione A posso collegare 3 LED con VF 3,5V oppure 1 LED con VF10V;oppure una striscia LED da 12V max 24Win posizione B posso collegare 6 LED con VF 3,7V oppure 2 LED con VF10V;oppure una striscia LED da 24V max 30Win posizione C posso collegare 12 LED con VF 3,7V oppure 4 LED con VF10V;in posizione D posso collegare 18 LED con VF 3,2V oppure 3 LED con VF17V.
EXAMPLE: A position, can connect 3 LED with VF 3,5V or 1 LED VF10V, or a strip LED 12V - 24W max B position, can connect 6 LED with VF 3.7V or 2 LED VF10V, or a strip LED 24V - 30W max C position, can connec 12 LED VF 3.7 V or 4 LED VF10V; D position, can connect 18 LED VF 3.2 V or 3 LED VF17V.
Posizione tensione di lavoro Corrente di uscita Numero max Potenza max EBLFDip-switch in emergenza - (VL) in emergenza - (I) di power LED per moduli LED
in corrente in tensione
A 9-12V 350-300mA NLED=12 / VF 24W TBDB 9-24V 350-250mA NLED=24 / VF 30W TBDC 9-46V 350-125mA NLED=46 / VF - TBDD 9-58V 350-100mA NLED=58 / VF - TBD
ELT6071 - 1 hour duration
Posizione tensione di lavoro Corrente di uscita Numero max Potenza max EBLFDip-switch in emergenza - (VL) in emergenza - (I) di power LED per moduli LED
in corrente in tensione
A 9-12V 350-300mA NLED=12 / VF 24W TBDB 9-24V 350-250mA NLED=24 / VF 30W TBDC 9-46V 350-125mA NLED=46 / VF - TBDD 9-58V 350-100mA NLED=58 / VF - TBD
ELT6074/3 - 3 hour duration
27ALVIT | POWER SUPPLIES AND EMERGENCY LIGHTING MODULES FOR LED
ILLUMINAZIONE D’EMERGENZA MADE IN ITALYEmergency lighting modules
ALVIT | POWER SUPPLIES AND EMERGENCY LIGHTING MODULES FOR LED 28
> Dimensioni compatte> Intervento istantaneo ad ogni mancanza di rete> Funzionamento sia in luce continua che in sola emergenza > Adatto per lampade LED 230V 0/50Hz> Elevato rendimento con minima dispersione
di calore ed assoluta affidabilità nel tempo> Batterie al Ni-Cd “alta temperatura”> Indicatore di ricarica a led > Dispositivo di protezione contro le scariche prolungate> Possibilità di inibizione in Modo Riposo con telecomando esterno
centralizzato> Possibilità di inibizione in Modo Inibizione> Sistema di autodiagnosi con modulo esterno a microprocessore> Conformità alle norme > Compact dimensions> Automatic operation> Maintained or non maintained operation> Suitable for LED lamps 230V 0/50Hz> High efficiency and absolute reliability> High temperature Ni-Cd batteries> Charge indicator with led> Protection device against extensive discharge> Rest mode facility with remot control device> Inhibition mode> Self diagnosis system with external module> Complying with EN61347-2-7
230 /240V – 50/60 Hz40 mA180 ÷ 250V DC70°C0 ÷ 40° C24 h1,5 mm2280mm350mmø 8.8mm
230 V – 50/60 Hz40 mA 180 ÷ 250V DC70°0 ÷ 40° C24 h1,5 mmq280mm350mmø 8.8mm
Tensione di alimentazione:Corrente di alimentazione:Tensione di uscita in modo emergenza:Temp. max d’esercizio misurata sull’involucro:Temperatura ambiente:Tempo di ricarica:Portata morsettiera:Lunghezza cavo batterie a bastone:Lunghezza cavo led:Foro di montaggio led:
Supply Voltage:Supply current:Emergency mode Output voltageMax case temperature:Ambient temperature:Recharging time:Screwless terminals max connection size:Length stick battery cable:Length led cable:Led mounting hole:
DIMENSIONI COMPATTE - LAMPADE LED 230VCompact dimension - LED lamps 230V
ELH771
Electronic unit | 0,20Kg
230V LED LAMPSModel Voltage Lamp Battery Flux ratio Autonomy Batt. current Weight
ELH771 230/240V - 50/60Hz GU10 3-6W 7,2V - 1,6Ah 100% 1h 1A 420g -ELH774 230/240V - 50/60Hz GU10 3-12W 7,2V - 4Ah 100% 1h 2,5A 1.040g -
Tabella di scelta - Table of choices
Battery - 7,2V - 1,6Ah | 0,21 Kg
ILLUMINAZIONE D’EMERGENZA MADE IN ITALYEmergency lighting modules
> Dimensioni compatte> Intervento istantaneo ad ogni mancanza di rete> Funzionamento sia in luce continua che in sola emergenza > Adatto per lampade LED 12V > Elevato rendimento con minima dispersione
di calore ed assoluta affidabilità nel tempo> Batterie al Ni-Cd “alta temperatura”> Indicatore di ricarica a led > Dispositivo di protezione contro le scariche prolungate> Possibilità di inibizione in Modo Riposo con telecomando esterno
centralizzato> Possibilità di inibizione in Modo Inibizione> Sistema di autodiagnosi con modulo esterno a microprocessore> Conformità alle norme > Compact dimensions> Automatic operation> Maintained or non maintained operation> Suitable for LED lamps 12V > High efficiency and absolute reliability> High temperature Ni-Cd batteries> Charge indicator with led> Protection device against extensive discharge> Rest mode facility with remot control device> Inhibition mode> Self diagnosis system with external module> Complying with EN61347-2-7
230 /240V – 50/60 Hz40 mA10 ÷ 14V DC70°C0 ÷ 40° C24 h1,5 mm2280mm350mmø 8,8mm
230 V – 50/60 Hz40 mA 10 ÷ 14V DC70°0 ÷ 40° C24 h1,5 mmq280mm350mmø 8,8mm
Tensione di alimentazione:Corrente di alimentazione:Tensione di uscita in modo emergenza:Temp. max d’esercizio misurata sull’involucro:Temperatura ambiente:Tempo di ricarica:Portata morsettiera:Lunghezza cavo batterie a bastone:Lunghezza cavo led:Foro di montaggio led:
Supply Voltage:Supply current:Emergency mode Output voltageMax case temperature:Ambient temperature:Recharging time:Screwless terminals max connection size:Length stick battery cable:Length led cable:Led mounting hole:
DIMENSIONI COMPATTE - LAMPADE LED 12VCompact dimension - LED lamps 12V
ELL771
12V LED LAMPSModel Voltage Lamp Battery Flux ratio Autonomy Batt. current Weight
ELL771 230/240V - 50/60Hz GU5.3 3-6W 7,2V - 1,6Ah 100% 1h 1A 420g -ELL774 230/240V - 50/60Hz GU5.3 3-12W 7,2V - 4Ah 100% 1h 2,5A 1.040g -
Tabella di scelta - Table of choices
29ALVIT | POWER SUPPLIES AND EMERGENCY LIGHTING MODULES FOR LED
Electronic unit | 0,20Kg
Battery - 7,2V - 1,6Ah | 0,21 Kg
31ALVIT | POWER SUPPLIES AND EMERGENCY LIGHTING MODULES FOR LED
Schemi di collegamentoWiring diagrams
SCHEMI DI COLLEGAMENTO MADE IN ITALYWiring diagrams
ALVIT | POWER SUPPLIES AND EMERGENCY LIGHTING MODULES FOR LED 32
SERIE AL3 SERIE AL6
SERIE AL10, AL10UL SERIE AL10SW
SERIE AL10R SERIE AL14
SERIE AL15 SERIE AL20
SERIE AL16D SERIE ALT35
Connettendo BA, Driver OFFSenza Connessioni, Set alla minima correnteConnettendo BC, Set alla massima correnteWiring BA, Driver OFFWithout connection, Set to Low currentWiring BC, Set to High current
Dip-Switch setting
220-240V Secondario 4 3 2 116,8W CV 24V ON - ON ON8,4W CV 12V ON ON ON ON
16,8W CC 350mA - - - -16,8W CC 500mA - ON - ON16,8W CC 700mA ON - ON ON
SCHEMI DI COLLEGAMENTO MADE IN ITALYWiring diagrams
33ALVIT | POWER SUPPLIES AND EMERGENCY LIGHTING MODULES FOR LED
Non permanente, power LED Permanente, power LED
SERIE L1031
SERIE AL35D SERIE AL35P
SERIE CL24MINI SERIE CL DIM
SERIE CL24D SERIE CL ON/OFF
Output Dip-Switch setting
220-240V Secondario 4 3 2 135W CV 48V - - ON -24W CV 24V ON - ON ON12W CV 12V ON ON ON ON24W CC 500mA - - - -35W CC 700mA - - ON -35W CC 800mA - - - ON35W CC 1000mA - ON ON ON
Output Dip-Switch setting
220-240V Secondario 4 3 2 135W CV 48V - - ON -24W CV 24V ON - ON ON12W CV 12V ON ON ON ON24W CC 500mA - - - -35W CC 700mA - - ON -35W CC 800mA - - - ON35W CC 1000mA - ON ON ON
Dimming Dip-Switch setting
1 2 3 4ON - - - ON/OFF- ON - - Push A- ON ON - Push B- - - ON Analog 0-10- - - - Analog 1-10
SCHEMI DI COLLEGAMENTO MADE IN ITALYWiring diagrams
ALVIT | POWER SUPPLIES AND EMERGENCY LIGHTING MODULES FOR LED 34
Non permanente Permanente
SERIE EL60
Non permanente Permanente
SERIE ELT60
Non permanente Permanente
SERIE ELH
Non permanente Permanente
SERIE ELL
Non permanente, power LED Permanente, power LED
SERIE L1241, L2471
INFORMAZIONI TECNICHE MADE IN ITALYTechnical informations
35ALVIT | POWER SUPPLIES AND EMERGENCY LIGHTING MODULES FOR LED
BATTERIETutti i Kit d’emergenza Alvit sono dotati di batterie ricaricabiliSaft Ni-Cd ad alta temperatura.Le batterie, specifiche per sistemi d’emergenza, sopportanouna carica permanente per almeno 4 anni, in ambienti ad altetemperature (fino a +40°). Modelli specifici come le VDT 70,mantengono le stesse caratteristiche a temperature fino a +55°.Temperature superiori a +60° sono consentite solo per breviperiodi.Le batterie possono essere assemblate in linea o a pacchetto.- Voltaggio costante durante la scarica- Zero manuntenzione- Ciclo di vita superiore a 500 scariche- Lungo periodo di stoccaggio (fino a 12 mesi in condizioni
normali: da +5° a +25°C con umidità relativa del 65%)
Sostituzione della batteriaBatterie ermetiche al Ni-Cd. Per la sostituzione estrarre il con-nettore come indicato in figura. Non disperdere nell'ambiente.Rendere al produttore.
BATTERIES All Emergency lighting kits Alvit are provided with recharge-able high temperature Ni-Cd Saft batteries.These cells accept a permanent charge for a minimum of 4years in high-temperature environments (up to +40°C) suchas security lighting equipment. Improved versions of the cells,such as the VTD 70, can withstand a constant temperature ofup to +55°C with a similar lifetime when permanently charged. Temperatures up to +60°C are permitted for short durations.Batteries should be supplied with tube or pack configurations.- Constant voltage during discharge- Zero maintenance- Long cycle life (over 500 charge discharge cycles)- Long term storage (up 12 months in normal conditions:
temperature range of +5° to +25°C in a 65 ± 5% relativehumidity atmosphere)
Battery replacementSealed Ni-Cd batteries. To replace batteries follows the instruc-tions. Do not discard in the environment. Return to manufacturer.
DIRETTIVA 2002/96/CE (WEEE/RAEE)La direttiva 2002/96/CE del 27.09.2003 riguarda lo smaltimen-to dei Rifiuti derivati dalle Apparecchiature Elettriche edElettroniche (RAEE, o anche WEEE: Waste Electrical andElectronic Equipment). Lo scopo della direttiva 200/96/CE è la riduzione dei rifiuti del-le Apparecchiature Elettriche ed Elettroniche al fine di incenti-vare il riutilizzo, il riciclo o altre forme di recupero di tali rifiuti.La direttiva WEEE, si applica pure, come apparec chiature, agliapparecchi illuminanti e agli apparecchi elettrodomestici.Nello scopo della Direttiva viene pre cisato che si applica aprodotti di consumo e che i componenti incorporati in tali pro-dotti sono esclusi dallo scopo della Direttiva.I componenti non devono esser smaltiti separa tamente maassieme all’apparecchio illuminante e all’apparecchio elettro-domestico dove sono montati.Quanto sopra vale pure per i componenti, definiti come indi-pendenti, montati esternamente all’apparec chio illuminante oall’apparecchio elettrodomestico, poiché vanno intesi solocome “unità funzionali” per il corretto funzionamento dell’ap-parecchiatura coperta dalla Direttiva 2002/96/CE.
DIRETTIVA 2002/95/CE (RoHS)La Direttiva 2002/95/CE, del 27 Gennaio 2003, riguarda lerestrizioni dell’uso di determinate sostanze pericolose nelleapparecchiature elettriche ed elettroniche (RoHS: Restrictionof the use of certain Hazardous Substances).La Direttiva RoHS stabilisce che a partire dal 1 luglio 2006 siaimpedita la commercializzazione di apparec chiature elettricheed elettroniche contenenti sostanze pericolose Piombo (Pb),Cadmio (Cd), Mercurio (Hg), Cromo Esavalente (Cr6+),Bifenile Polibromurati (PBB), Etere di Difenile polibromurato(PBDE) con livelli superiori ai limiti ammessi.La Direttiva 2002/95/CE si applica a tutti gli Apparecchi Illuminantie di conseguenza a tutti i suoi componenti. Da evidenziare inoltreche le batterie sono escluse dalla Direttiva in oggetto poiché rego-lamentate dalla Direttiva 98/101/CE.Alvit assicura che tutti i componenti utilizzati sono conformi allaDirettiva 200/95/CE.
DIRECTIVE 2002/96/CE (WEEE)The Directive 2002/96/CE of 27/09/2003 regards the disposalof Waste deriving from Electrical and Electronic Equipment(WEEE).Above all, the purpose of the Directive 2002/96/CE is thereduction of electrical and electronic equipment waste and toreduce waste even further by encouraging the re-utilisation,recycling or other forms of recovery of this waste.The WEEE Directive, also applies to lighting equipment andelectro-domestic equipment. Within the objective of theDirective, it is specified that the Directive is applied to consumerproducts and that the components incorporated in these prod-ucts are excluded from the objective of the Directive. The components must not be disposed of separately buttogether with the lighting equipment and the electro-domesticequipment in which they are assembled.The above is also valid for the components that are assembledexternally of the lighting equipment or the electro-domesticequipment and defined as independent because they are onlyintended to be “functional units” for the correct functioning ofthe equipment covered by the Directive 2002/96/CE.
DIRECTIVE 2002/95/CE (RoHS)The Directive 2002/95/CE 27/01/2003 regards the restriction of theuse of determined dangerous substances in electrical and elec-tronic equipment (RoHS - Restriction of the use of certainHazardous Substances). The RoHS Directive establishes thatfrom the 1st of July 2006, the commercialisation is forbidden ofnew electrical and electronic equipment with dangerous sub-stances Lead (Pb), Cadmium (Cd), Mercury (Hg), Hexavalentchromium (Cr6+), Polybrominated biphenyls (PBB),Polybrominated diphenyl ethers (PBDE) with levels more than thepermitted limits.The Directive 2002/95/CE, is applied to all Lighting Equipment andconsequently all of their components.It must be noted furthermore that batteries are excluded from theDirective 2002/95/CE because they are regulated by the Directive98/101/CE.Alvit ensure that all components utilised conform to the Directive2002/95/CE.
INFORMAZIONI TECNICHE MADE IN ITALYTechnical informations
ALVIT | POWER SUPPLIES AND EMERGENCY LIGHTING MODULES FOR LED 36
Alvit garantisce i propri prodotti per 24 mesi dalla data di fab-bricazione indicata sui prodotti stessi. La garanzia copre tuttigli eventuali difetti di fabbricazione. La garanzia non copre glieventuali danni causati da un utilizzo errato e non conformealle istruzioni di installazione e impiego.Qualsiasi modifica annulla la garanzia e può rendere pericolo-so il prodotto.
NotaAlvit si riserva la possibilità, nel rispetto delle norme in vigore, diapportare, senza preavviso, modifiche tecniche e dimensionaliper migliorare le caratteristiche e le prestazioni dei prodotti.
Alvit guarantees its products for 24 months from the date ofmanufacture shown on the products.This warranty covers all manufacturing defects, if any. The war-ranty does not cover damage due to improper use not con-forming to the installation and operating instructions.If the product are opened or tampered with, this warranty willbe invalid.
NoteIn compliance with the regulations in force, Alvit retains theright to make technical and/or dimensional changes toimprove product performance and characteristics without pri-or notice.
GARANZIA - WARRANTY