Post on 23-Sep-2020
transcript
TECNICI IN GOMMA ESINTOIL SRLVia Donatello 820020 Solaro (MI) - ITALYPhone +39 02.96799075Fax +39 02.99502152info@sintoil.it - www.sintoil.itC.F. e P.IVA 03315960967
DESTINAZIONE D’USO: apparecchiature tecnichedi laboratorio, impianti di saldatura, industria chimica,macchinari per industria tessile TEMPERATURA:-25/280 °C DUREZZA: 65/70 PRODUTTORE: 3M CO.
INTENDED USE: technical equipment for laboratories,welding equipment, chemical industry, machinery forthe textile industry TEMPERATURE: -25/280 °CHARDNESS: 65/70 MANUFACTURER: 3M CO.
DESTINAZIONE D’USO: elettrovalvole, fluidodinamica,pistoni, rubinetteria, valvoleTEMPERATURA: -25/130 °C DUREZZA: 60, 70, 80, 90PRODUTTORE: ENICHEM BAYER
INTENDED USE: solenoid valves, fluid dynamics,pistons, faucets, valves TEMPERATURE: -25/130 °C HARDNESS: 60, 70, 80, 90 MANUFACTURER: ENICHEM BAYER
DESTINAZIONE D’USO: impianti d’imbottigliamentoe confezionamento, industria chimica, industriafarmaceutica TEMPERATURA: -40/240 °C DUREZZA:30, 50, 60, 70 PRODUTTORE: DOW CORNING
INTENDED USE: bottling and packaging plants,chemical industry, pharmaceutical industryTEMPERATURE: -40/240 °C HARDNESS: 30, 50, 60, 70MANUFACTURER: DOW CORNING
DESTINAZIONE D’USO: industria chimica, industriapetrolifera, settore automobilisticoTEMPERATURA: -20/220 °C DUREZZA: 70/80PRODUTTORE: ASAHI GLASS CO.
INTENDED USE: chemical industry, petroleumindustry, automotive industry TEMPERATURE: -20/220 °C HARDNESS: 70/80 MANUFACTURER: ASAHI GLASS CO.
DESTINAZIONE D’USO: elettrovalvole, industriachimica, rubinetteria TEMPERATURA: -30/150 °CDUREZZA: 50, 60, 70, 80, 90 PRODUTTORE: EXXON
INTENDED USE: solenoid valves, chemical industry,faucets TEMPERATURE: -30/150 °C HARDNESS: 50, 60, 70, 80, 90 MANUFACTURER: EXXON
DESTINAZIONE D’USO: elettrovalvole, industriachimica, industria petrolifera, settore automobilistico,valvole TEMPERATURA: -40/260 °C DUREZZA:50, 60, 70, 80, 90 PRODUTTORE: DUPONT
INTENDED USE: solenoid valves, chemical industry,petroleum industry, automotive industry, valvesTEMPERATURE: -40/260 °C HARDNESS: 50, 60,70, 80, 90 MANUFACTURER: DUPONT
DESTINAZIONE D’USO: impianti di refrigerazione,industria chimica, settore automobilistico, settoreferroviario, settore navale TEMPERATURA: -30/120 °CDUREZZA: 60, 70, 75 PRODUTTORE: DUPONT
INTENDED USE: refrigeration systems, chemicalindustry, automotive industry, railway industry,shipbuilding industry TEMPERATURE: -30/120 °CHARDNESS: 60, 70, 75 MANUFACTURER: DUPONT
DESTINAZIONE D’USO: oleodinamica, pneumatica,settore automobilistico TEMPERATURA: -40/130 °CDUREZZA: 50, 60, 70, 80, 90 PRODUTTORE: BAYER
INTENDED USE: oil hydraulics, pneumatics, automotiveindustry TEMPERATURE: -40/130 °C HARDNESS: 50, 60, 70, 80, 90 MANUFACTURER: BAYER
DESTINAZIONE D’USO: elettrovalvole, impianti dicondizionamento, impianti di refrigerazione,industria petrolifera, rubinetteria HQ, settoreautomobilistico, valvole TEMPERATURA: -40/150 °CDUREZZA: 60, 70, 80 PRODUTTORE: BAYER
INTENDED USE: solenoid valves, air conditioningsystems, refrigeration systems, oil industry, HQ faucets,automotive industry, valves TEMPERATURE: -40/150 °C HARDNESS: 60, 70, 80 MANUFACTURER: BAYER
DESTINAZIONE D’USO: impianti d’imbottigliamentoe confezionamento, industria chimica, industriafarmaceutica TEMPERATURA: -40/240 °CDUREZZA: 30, 50, 60, 70 PRODUTTORE: DOW CORNING
INTENDED USE: bottling and packaging plants,chemical industry, pharmaceutical industryTEMPERATURE: -40/240 °C HARDNESS: 30, 50, 60, 70;MANUFACTURER: DOW CORNING
KEL-F® NBR
SILICONE TFE
VISTALON® VITON®
THERBAN® VMQ
NEOPRENE® PERBUNAN®
MESCOLE DI GOMMA
CR
EAT
ED
BY
MA
RB
LEST
UD
IO.IT
RUBBER COMPOUNDS
SINTOIL_ITA 18-01-2011 15:09 Pagina 1
L'ampia esperienza nella produzione di mescole in gomma consente all’azienda di formulare,in funzione delle caratteristiche del pezzo e della sua applicazione, una mescola specifica
per ogni impiego, nei settori food-beverage, petrolchimico, fluid-control e automotive.
Il ciclo produttivo, tutto interno, avviene a ciclo completo, a partire dall’acquisto dellematerie prime impiegate nella produzione delle mescole di gomma, effettuata grazie
all’utilizzo di mescolatori chiusi e aperti. Per la fase successiva - stampaggio degli articoli - vengono
impiegate presse a iniezione automatiche e presse acompressione tradizionali.
I processi conclusivi - sbavatura e trattamenti di finitura -sono invece eseguiti con macchine a processo criogenicoe cicli automatizzati di post-curing.
Oltre ai tradizionali O-ring, la produzione è concentratasu guarnizioni e articoli a disegno, su specifiche del cliente,
ottimizzati secondo le normative e capitolati.
Their ample experience in the production of rubber compoundsallows the company to make, in accordance with the characteristics of
the piece and its application, a specific compound for each application within thefood and beverage, petrochemical, fluid-control, and automotive sectors.
The completely internal production cycle is quite complete. It starts with the purchase of the rawmaterials used in the production of rubber compounds, carried out by using open and closed mixers.For the next phase - the molding of the products - automatic injection presses and traditionalcompression presses are used.The final processes - the deburring and finishing treatments - are performed with cryogenicprocess equipment and automated post-curing cycles.
In addition to the traditional O-ring, the production is concentrated on gaskets and ad-hocarticles, made according to the customer’s specifications, which are optimized according tothe standards and specifications.
L’AZIENDA PRODUZIONE
UN’ALCHIMIACHIAMATAGOMMA
AN ALCHEMY CALLED RUBBEROVER 50 YEARS OF EXPERIENCE SUPPORTING YOUR BRILLIANCEFounded in Milan in 1958, Sintoil, now in its third generation, has declared itself on the Italian and international market by producing high quality gaskets.Supporting the industrial needs of customers, via the functionality of products with precise characteristics, has always been the goal of the company.We are talking about technological alchemy - in the design of specific compounds, in the choice of the best raw materials, and in the complete production process aimed at quality.
In 2004, Sintoil launched a major internal renovation process which involved, in addition to strong investments into the very latestmachinery, the creation of an innovative quality control laboratory. This has been crucial to the success of a product that meets itsexpectations of use. The internal laboratory performs the dual function of research, by conducting chemical-physio-mechanical tests onpolymers and compounds, and monitoring of all the production stages, through the spectrophotometric analysis of raw materials, the rheometricanalysis of the compounds, the calorimetric analysis to determine the conformity of the production, and the dimensional analysis of finished products.
Even today, Sintoil’s commitment to reinvent itself and improve its product offer continues. This is confirmed by the setting up of theirnew manufacturing plant in Solaro and the attention paid to ensuring for certified and innovative products.
This is a commitment that will continue into the future.
ARTICOLI TECNICI IN GOMMA E POLIMERI VARI
MESCOLE DI GOMMARUBBER COMPOUNDSTHE COMPANY PRODUCTION
DESTINAZIONE D’USO: industria chimica, industriapetrolifera, settore automobilistico TEMPERATURA: -20/220 °C DUREZZA: 70/80PRODUTTORE: ASAHI GLASS CO.
INTENDED USE: chemical industry, petroleumindustry, automotive industry TEMPERATURE: -20/220 °C HARDNESS: 70/80MANUFACTURER: ASAHI GLASS CO., LTD
DESTINAZIONE D’USO: impianti per telecomunicazioni,settore ferroviario, settore navale TEMPERATURA: -20/120 °C DUREZZA: 60/70PRODUTTORE: BAYER DUPONT
INTENDED USE: telecommunications systems,railway industry, shipbuilding industry TEMPERATURE: -20/120 °C HARDNESS: 60/70MANUFACTURER: BAYER DUPONT
DESTINAZIONE D’USO: impianti termoidraulici,industria chimica, rubinetteria HQ TEMPERATURA: 30/180 °C DUREZZA: 70/80PRODUTTORE: ENICHEM
INTENDED USE: plumbing and heating systems,chemical industry, HQ faucets TEMPERATURE: 30/180 °C HARDNESS: 70/80 MANUFACTURER: ENICHEM
DESTINAZIONE D’USO: elettrovalvole, industriachimica, industria petrolifera, valvoleTEMPERATURA: -25/280 °C DUREZZA: 70, 80, 90PRODUTTORE: 3M CO. DUPONT
INTENDED USE: solenoid valves, chemical industry,petroleum industry, valves TEMPERATURE: -25/280 °C HARDNESS: 70, 80, 90MANUFACTURER: 3M CO. DUPONT
DESTINAZIONE D’USO: impianti d’imbottigliamentoe confezionamento TEMPERATURA: -30/270 °C DUREZZA: 70
INTENDED USE: bottling and packaging plantsTEMPERATURE: -30/270 °C HARDNESS: 70
DESTINAZIONE D’USO: elettrovalvole, industriapetrolifera, oleodinamica HQ, pistoni, pneumaticaHQ, valvole TEMPERATURA: -30/150 °CDUREZZA: 70/80 PRODUTTORE: ZEON BAYER
INTENDED USE: solenoid valves, oil industry, HQ oilhydraulics, pistons, HQ pneumatic, valvesTEMPERATURE: -30/150 °C HARDNESS: 70/80MANUFACTURER: ZEON BAYER
DESTINAZIONE D’USO: elettrovalvole, impianti d’imbot-tigliamento e confezionamento, industria chimica,rubinetteria HQ, valvole TEMPERATURA: -35/180 °CDUREZZA: 70/80 PRODUTTORE: ENICHEM
INTENDED USE: solenoid valves, bottling and packagingplants, chemical industry, HQ faucets, valvesTEMPERATURE: -35/180 °C HARDNESS: 70/80MANUFACTURER: ENICHEM
DESTINAZIONE D’USO: impianti d’imbottigliamentoe confezionamento TEMPERATURA: -30/150 °CDUREZZA: 50, 60, 65, 70, 75, 80, 85, 90PRODUTTORE: ENICHEM EXXON
INTENDED USE: bottling and packaging plantsTEMPERATURE: -30/150 °C HARDNESS: 50, 60, 65, 70, 75, 80, 85, 90MANUFACTURER: ENICHEM EXXON
DESTINAZIONE D’USO: industria chimica, industriafarmaceutica, settore automobilisticoTEMPERATURA: -60/200 °C DUREZZA: 50, 70, 80PRODUTTORE: DOW CORNING
INTENDED USE: chemical industry, pharmaceuticalindustry, automotive industry TEMPERATURE: -60/200 °C HARDNESS: 50, 70, 80MANUFACTURER: DOW CORNING
DESTINAZIONE D’USO: industria chimica, industriafarmaceutica, settore automobilisticoTEMPERATURA: -60/200 °C DUREZZA: 50, 70, 80PRODUTTORE: DOW CORNING
INTENDED USE: chemical industry, pharmaceuticalindustry, automotive industry TEMPERATURE: -60/200 °C HARDNESS: 50, 70, 80MANUFACTURER: DOW CORNING
AFLAS® CR
EPM FKM
GMS HNBR
FVQM FLUOROSILICONE
ENICHEM CO (DUTRAL)® EPDM
OLTRE 50 ANNI DI ESPERIENZA A SUPPORTO DELLA VOSTRA GENIALITÀNata a Milano nel 1958, Sintoil, oggi alla sua terza generazione, siè affermata sul mercato italiano e internazionale grazie alla produzionedi guarnizioni di qualità superiore. Supportare le esigenze industriali della clientela con la funzionalitàdi articoli dalle caratteristiche mirate, è da sempre l’obiettivodell’azienda. Alchimia tecnologica, quindi, nel progettare mescolespecifiche, nella scelta delle migliori materie prime, nel processoproduttivo completo indirizzato alla qualità.
Dal 2004 Sintoil ha avviato un importante processo di rinnovamentointerno che ha riguardato, oltre a forti investimenti in macchinari diultimissima generazione, la realizzazione di un innovativo laboratoriodi controllo qualità, elemento determinante per la riuscita di unprodotto che corrisponda alle aspettative di utilizzo. Il laboratorio interno svolge la duplice funzione di ricerca,effettuando test chimico-fisio-meccanici su polimeri e mescole,e di controllo su tutte le fasi produttive, attraverso analisispettrofotometriche sulle materie prime, reometriche sullemescole, calorimetriche per stabilire la conformità della produzionee dimensionali sui prodotti finiti.
Ad oggi, l'impegno di Sintoil a rinnovarsi e migliorare la suaofferta, continua, come confermato dall'insediamento nel nuovostabilimento produttivo di Solaro e dall'attenzione rivolta agarantire prodotti certificati e innovativi.
Impegno che continuerà in futuro.
SINTOIL_ITA 18-01-2011 15:10 Pagina 2
L'ampia esperienza nella produzione di mescole in gomma consente all’azienda di formulare,in funzione delle caratteristiche del pezzo e della sua applicazione, una mescola specifica
per ogni impiego, nei settori food-beverage, petrolchimico, fluid-control e automotive.
Il ciclo produttivo, tutto interno, avviene a ciclo completo, a partire dall’acquisto dellematerie prime impiegate nella produzione delle mescole di gomma, effettuata grazie
all’utilizzo di mescolatori chiusi e aperti. Per la fase successiva - stampaggio degli articoli - vengono
impiegate presse a iniezione automatiche e presse acompressione tradizionali.
I processi conclusivi - sbavatura e trattamenti di finitura -sono invece eseguiti con macchine a processo criogenicoe cicli automatizzati di post-curing.
Oltre ai tradizionali O-ring, la produzione è concentratasu guarnizioni e articoli a disegno, su specifiche del cliente,
ottimizzati secondo le normative e capitolati.
Their ample experience in the production of rubber compoundsallows the company to make, in accordance with the characteristics of
the piece and its application, a specific compound for each application within thefood and beverage, petrochemical, fluid-control, and automotive sectors.
The completely internal production cycle is quite complete. It starts with the purchase of the rawmaterials used in the production of rubber compounds, carried out by using open and closed mixers.For the next phase - the molding of the products - automatic injection presses and traditionalcompression presses are used.The final processes - the deburring and finishing treatments - are performed with cryogenicprocess equipment and automated post-curing cycles.
In addition to the traditional O-ring, the production is concentrated on gaskets and ad-hocarticles, made according to the customer’s specifications, which are optimized according tothe standards and specifications.
L’AZIENDA PRODUZIONE
UN’ALCHIMIACHIAMATAGOMMA
AN ALCHEMY CALLED RUBBEROVER 50 YEARS OF EXPERIENCE SUPPORTING YOUR BRILLIANCEFounded in Milan in 1958, Sintoil, now in its third generation, has declared itself on the Italian and international market by producing high quality gaskets.Supporting the industrial needs of customers, via the functionality of products with precise characteristics, has always been the goal of the company.We are talking about technological alchemy - in the design of specific compounds, in the choice of the best raw materials, and in the complete production process aimed at quality.
In 2004, Sintoil launched a major internal renovation process which involved, in addition to strong investments into the very latestmachinery, the creation of an innovative quality control laboratory. This has been crucial to the success of a product that meets itsexpectations of use. The internal laboratory performs the dual function of research, by conducting chemical-physio-mechanical tests onpolymers and compounds, and monitoring of all the production stages, through the spectrophotometric analysis of raw materials, the rheometricanalysis of the compounds, the calorimetric analysis to determine the conformity of the production, and the dimensional analysis of finished products.
Even today, Sintoil’s commitment to reinvent itself and improve its product offer continues. This is confirmed by the setting up of theirnew manufacturing plant in Solaro and the attention paid to ensuring for certified and innovative products.
This is a commitment that will continue into the future.
ARTICOLI TECNICI IN GOMMA E POLIMERI VARI
MESCOLE DI GOMMARUBBER COMPOUNDSTHE COMPANY PRODUCTION
DESTINAZIONE D’USO: industria chimica, industriapetrolifera, settore automobilistico TEMPERATURA: -20/220 °C DUREZZA: 70/80PRODUTTORE: ASAHI GLASS CO.
INTENDED USE: chemical industry, petroleumindustry, automotive industry TEMPERATURE: -20/220 °C HARDNESS: 70/80MANUFACTURER: ASAHI GLASS CO., LTD
DESTINAZIONE D’USO: impianti per telecomunicazioni,settore ferroviario, settore navale TEMPERATURA: -20/120 °C DUREZZA: 60/70PRODUTTORE: BAYER DUPONT
INTENDED USE: telecommunications systems,railway industry, shipbuilding industry TEMPERATURE: -20/120 °C HARDNESS: 60/70MANUFACTURER: BAYER DUPONT
DESTINAZIONE D’USO: impianti termoidraulici,industria chimica, rubinetteria HQ TEMPERATURA: 30/180 °C DUREZZA: 70/80PRODUTTORE: ENICHEM
INTENDED USE: plumbing and heating systems,chemical industry, HQ faucets TEMPERATURE: 30/180 °C HARDNESS: 70/80 MANUFACTURER: ENICHEM
DESTINAZIONE D’USO: elettrovalvole, industriachimica, industria petrolifera, valvoleTEMPERATURA: -25/280 °C DUREZZA: 70, 80, 90PRODUTTORE: 3M CO. DUPONT
INTENDED USE: solenoid valves, chemical industry,petroleum industry, valves TEMPERATURE: -25/280 °C HARDNESS: 70, 80, 90MANUFACTURER: 3M CO. DUPONT
DESTINAZIONE D’USO: impianti d’imbottigliamentoe confezionamento TEMPERATURA: -30/270 °C DUREZZA: 70
INTENDED USE: bottling and packaging plantsTEMPERATURE: -30/270 °C HARDNESS: 70
DESTINAZIONE D’USO: elettrovalvole, industriapetrolifera, oleodinamica HQ, pistoni, pneumaticaHQ, valvole TEMPERATURA: -30/150 °CDUREZZA: 70/80 PRODUTTORE: ZEON BAYER
INTENDED USE: solenoid valves, oil industry, HQ oilhydraulics, pistons, HQ pneumatic, valvesTEMPERATURE: -30/150 °C HARDNESS: 70/80MANUFACTURER: ZEON BAYER
DESTINAZIONE D’USO: elettrovalvole, impianti d’imbot-tigliamento e confezionamento, industria chimica,rubinetteria HQ, valvole TEMPERATURA: -35/180 °CDUREZZA: 70/80 PRODUTTORE: ENICHEM
INTENDED USE: solenoid valves, bottling and packagingplants, chemical industry, HQ faucets, valvesTEMPERATURE: -35/180 °C HARDNESS: 70/80MANUFACTURER: ENICHEM
DESTINAZIONE D’USO: impianti d’imbottigliamentoe confezionamento TEMPERATURA: -30/150 °CDUREZZA: 50, 60, 65, 70, 75, 80, 85, 90PRODUTTORE: ENICHEM EXXON
INTENDED USE: bottling and packaging plantsTEMPERATURE: -30/150 °C HARDNESS: 50, 60, 65, 70, 75, 80, 85, 90MANUFACTURER: ENICHEM EXXON
DESTINAZIONE D’USO: industria chimica, industriafarmaceutica, settore automobilisticoTEMPERATURA: -60/200 °C DUREZZA: 50, 70, 80PRODUTTORE: DOW CORNING
INTENDED USE: chemical industry, pharmaceuticalindustry, automotive industry TEMPERATURE: -60/200 °C HARDNESS: 50, 70, 80MANUFACTURER: DOW CORNING
DESTINAZIONE D’USO: industria chimica, industriafarmaceutica, settore automobilisticoTEMPERATURA: -60/200 °C DUREZZA: 50, 70, 80PRODUTTORE: DOW CORNING
INTENDED USE: chemical industry, pharmaceuticalindustry, automotive industry TEMPERATURE: -60/200 °C HARDNESS: 50, 70, 80MANUFACTURER: DOW CORNING
AFLAS® CR
EPM FKM
GMS HNBR
FVQM FLUOROSILICONE
ENICHEM CO (DUTRAL)® EPDM
OLTRE 50 ANNI DI ESPERIENZA A SUPPORTO DELLA VOSTRA GENIALITÀNata a Milano nel 1958, Sintoil, oggi alla sua terza generazione, siè affermata sul mercato italiano e internazionale grazie alla produzionedi guarnizioni di qualità superiore. Supportare le esigenze industriali della clientela con la funzionalitàdi articoli dalle caratteristiche mirate, è da sempre l’obiettivodell’azienda. Alchimia tecnologica, quindi, nel progettare mescolespecifiche, nella scelta delle migliori materie prime, nel processoproduttivo completo indirizzato alla qualità.
Dal 2004 Sintoil ha avviato un importante processo di rinnovamentointerno che ha riguardato, oltre a forti investimenti in macchinari diultimissima generazione, la realizzazione di un innovativo laboratoriodi controllo qualità, elemento determinante per la riuscita di unprodotto che corrisponda alle aspettative di utilizzo. Il laboratorio interno svolge la duplice funzione di ricerca,effettuando test chimico-fisio-meccanici su polimeri e mescole,e di controllo su tutte le fasi produttive, attraverso analisispettrofotometriche sulle materie prime, reometriche sullemescole, calorimetriche per stabilire la conformità della produzionee dimensionali sui prodotti finiti.
Ad oggi, l'impegno di Sintoil a rinnovarsi e migliorare la suaofferta, continua, come confermato dall'insediamento nel nuovostabilimento produttivo di Solaro e dall'attenzione rivolta agarantire prodotti certificati e innovativi.
Impegno che continuerà in futuro.
SINTOIL_ITA 18-01-2011 15:10 Pagina 2
L'ampia esperienza nella produzione di mescole in gomma consente all’azienda di formulare,in funzione delle caratteristiche del pezzo e della sua applicazione, una mescola specifica
per ogni impiego, nei settori food-beverage, petrolchimico, fluid-control e automotive.
Il ciclo produttivo, tutto interno, avviene a ciclo completo, a partire dall’acquisto dellematerie prime impiegate nella produzione delle mescole di gomma, effettuata grazie
all’utilizzo di mescolatori chiusi e aperti. Per la fase successiva - stampaggio degli articoli - vengono
impiegate presse a iniezione automatiche e presse acompressione tradizionali.
I processi conclusivi - sbavatura e trattamenti di finitura -sono invece eseguiti con macchine a processo criogenicoe cicli automatizzati di post-curing.
Oltre ai tradizionali O-ring, la produzione è concentratasu guarnizioni e articoli a disegno, su specifiche del cliente,
ottimizzati secondo le normative e capitolati.
Their ample experience in the production of rubber compoundsallows the company to make, in accordance with the characteristics of
the piece and its application, a specific compound for each application within thefood and beverage, petrochemical, fluid-control, and automotive sectors.
The completely internal production cycle is quite complete. It starts with the purchase of the rawmaterials used in the production of rubber compounds, carried out by using open and closed mixers.For the next phase - the molding of the products - automatic injection presses and traditionalcompression presses are used.The final processes - the deburring and finishing treatments - are performed with cryogenicprocess equipment and automated post-curing cycles.
In addition to the traditional O-ring, the production is concentrated on gaskets and ad-hocarticles, made according to the customer’s specifications, which are optimized according tothe standards and specifications.
L’AZIENDA PRODUZIONE
UN’ALCHIMIACHIAMATAGOMMA
AN ALCHEMY CALLED RUBBEROVER 50 YEARS OF EXPERIENCE SUPPORTING YOUR BRILLIANCEFounded in Milan in 1958, Sintoil, now in its third generation, has declared itself on the Italian and international market by producing high quality gaskets.Supporting the industrial needs of customers, via the functionality of products with precise characteristics, has always been the goal of the company.We are talking about technological alchemy - in the design of specific compounds, in the choice of the best raw materials, and in the complete production process aimed at quality.
In 2004, Sintoil launched a major internal renovation process which involved, in addition to strong investments into the very latestmachinery, the creation of an innovative quality control laboratory. This has been crucial to the success of a product that meets itsexpectations of use. The internal laboratory performs the dual function of research, by conducting chemical-physio-mechanical tests onpolymers and compounds, and monitoring of all the production stages, through the spectrophotometric analysis of raw materials, the rheometricanalysis of the compounds, the calorimetric analysis to determine the conformity of the production, and the dimensional analysis of finished products.
Even today, Sintoil’s commitment to reinvent itself and improve its product offer continues. This is confirmed by the setting up of theirnew manufacturing plant in Solaro and the attention paid to ensuring for certified and innovative products.
This is a commitment that will continue into the future.
ARTICOLI TECNICI IN GOMMA E POLIMERI VARI
MESCOLE DI GOMMARUBBER COMPOUNDSTHE COMPANY PRODUCTION
DESTINAZIONE D’USO: industria chimica, industriapetrolifera, settore automobilistico TEMPERATURA: -20/220 °C DUREZZA: 70/80PRODUTTORE: ASAHI GLASS CO.
INTENDED USE: chemical industry, petroleumindustry, automotive industry TEMPERATURE: -20/220 °C HARDNESS: 70/80MANUFACTURER: ASAHI GLASS CO., LTD
DESTINAZIONE D’USO: impianti per telecomunicazioni,settore ferroviario, settore navale TEMPERATURA: -20/120 °C DUREZZA: 60/70PRODUTTORE: BAYER DUPONT
INTENDED USE: telecommunications systems,railway industry, shipbuilding industry TEMPERATURE: -20/120 °C HARDNESS: 60/70MANUFACTURER: BAYER DUPONT
DESTINAZIONE D’USO: impianti termoidraulici,industria chimica, rubinetteria HQ TEMPERATURA: 30/180 °C DUREZZA: 70/80PRODUTTORE: ENICHEM
INTENDED USE: plumbing and heating systems,chemical industry, HQ faucets TEMPERATURE: 30/180 °C HARDNESS: 70/80 MANUFACTURER: ENICHEM
DESTINAZIONE D’USO: elettrovalvole, industriachimica, industria petrolifera, valvoleTEMPERATURA: -25/280 °C DUREZZA: 70, 80, 90PRODUTTORE: 3M CO. DUPONT
INTENDED USE: solenoid valves, chemical industry,petroleum industry, valves TEMPERATURE: -25/280 °C HARDNESS: 70, 80, 90MANUFACTURER: 3M CO. DUPONT
DESTINAZIONE D’USO: impianti d’imbottigliamentoe confezionamento TEMPERATURA: -30/270 °C DUREZZA: 70
INTENDED USE: bottling and packaging plantsTEMPERATURE: -30/270 °C HARDNESS: 70
DESTINAZIONE D’USO: elettrovalvole, industriapetrolifera, oleodinamica HQ, pistoni, pneumaticaHQ, valvole TEMPERATURA: -30/150 °CDUREZZA: 70/80 PRODUTTORE: ZEON BAYER
INTENDED USE: solenoid valves, oil industry, HQ oilhydraulics, pistons, HQ pneumatic, valvesTEMPERATURE: -30/150 °C HARDNESS: 70/80MANUFACTURER: ZEON BAYER
DESTINAZIONE D’USO: elettrovalvole, impianti d’imbot-tigliamento e confezionamento, industria chimica,rubinetteria HQ, valvole TEMPERATURA: -35/180 °CDUREZZA: 70/80 PRODUTTORE: ENICHEM
INTENDED USE: solenoid valves, bottling and packagingplants, chemical industry, HQ faucets, valvesTEMPERATURE: -35/180 °C HARDNESS: 70/80MANUFACTURER: ENICHEM
DESTINAZIONE D’USO: impianti d’imbottigliamentoe confezionamento TEMPERATURA: -30/150 °CDUREZZA: 50, 60, 65, 70, 75, 80, 85, 90PRODUTTORE: ENICHEM EXXON
INTENDED USE: bottling and packaging plantsTEMPERATURE: -30/150 °C HARDNESS: 50, 60, 65, 70, 75, 80, 85, 90MANUFACTURER: ENICHEM EXXON
DESTINAZIONE D’USO: industria chimica, industriafarmaceutica, settore automobilisticoTEMPERATURA: -60/200 °C DUREZZA: 50, 70, 80PRODUTTORE: DOW CORNING
INTENDED USE: chemical industry, pharmaceuticalindustry, automotive industry TEMPERATURE: -60/200 °C HARDNESS: 50, 70, 80MANUFACTURER: DOW CORNING
DESTINAZIONE D’USO: industria chimica, industriafarmaceutica, settore automobilisticoTEMPERATURA: -60/200 °C DUREZZA: 50, 70, 80PRODUTTORE: DOW CORNING
INTENDED USE: chemical industry, pharmaceuticalindustry, automotive industry TEMPERATURE: -60/200 °C HARDNESS: 50, 70, 80MANUFACTURER: DOW CORNING
AFLAS® CR
EPM FKM
GMS HNBR
FVQM FLUOROSILICONE
ENICHEM CO (DUTRAL)® EPDM
OLTRE 50 ANNI DI ESPERIENZA A SUPPORTO DELLA VOSTRA GENIALITÀNata a Milano nel 1958, Sintoil, oggi alla sua terza generazione, siè affermata sul mercato italiano e internazionale grazie alla produzionedi guarnizioni di qualità superiore. Supportare le esigenze industriali della clientela con la funzionalitàdi articoli dalle caratteristiche mirate, è da sempre l’obiettivodell’azienda. Alchimia tecnologica, quindi, nel progettare mescolespecifiche, nella scelta delle migliori materie prime, nel processoproduttivo completo indirizzato alla qualità.
Dal 2004 Sintoil ha avviato un importante processo di rinnovamentointerno che ha riguardato, oltre a forti investimenti in macchinari diultimissima generazione, la realizzazione di un innovativo laboratoriodi controllo qualità, elemento determinante per la riuscita di unprodotto che corrisponda alle aspettative di utilizzo. Il laboratorio interno svolge la duplice funzione di ricerca,effettuando test chimico-fisio-meccanici su polimeri e mescole,e di controllo su tutte le fasi produttive, attraverso analisispettrofotometriche sulle materie prime, reometriche sullemescole, calorimetriche per stabilire la conformità della produzionee dimensionali sui prodotti finiti.
Ad oggi, l'impegno di Sintoil a rinnovarsi e migliorare la suaofferta, continua, come confermato dall'insediamento nel nuovostabilimento produttivo di Solaro e dall'attenzione rivolta agarantire prodotti certificati e innovativi.
Impegno che continuerà in futuro.
SINTOIL_ITA 18-01-2011 15:10 Pagina 2
TECNICI IN GOMMA ESINTOIL SRLVia Donatello 820020 Solaro (MI) - ITALYPhone +39 02.96799075Fax +39 02.99502152info@sintoil.it - www.sintoil.itC.F. e P.IVA 03315960967
DESTINAZIONE D’USO: apparecchiature tecnichedi laboratorio, impianti di saldatura, industria chimica,macchinari per industria tessile TEMPERATURA:-25/280 °C DUREZZA: 65/70 PRODUTTORE: 3M CO.
INTENDED USE: technical equipment for laboratories,welding equipment, chemical industry, machinery forthe textile industry TEMPERATURE: -25/280 °CHARDNESS: 65/70 MANUFACTURER: 3M CO.
DESTINAZIONE D’USO: elettrovalvole, fluidodinamica,pistoni, rubinetteria, valvoleTEMPERATURA: -25/130 °C DUREZZA: 60, 70, 80, 90PRODUTTORE: ENICHEM BAYER
INTENDED USE: solenoid valves, fluid dynamics,pistons, faucets, valves TEMPERATURE: -25/130 °C HARDNESS: 60, 70, 80, 90 MANUFACTURER: ENICHEM BAYER
DESTINAZIONE D’USO: impianti d’imbottigliamentoe confezionamento, industria chimica, industriafarmaceutica TEMPERATURA: -40/240 °C DUREZZA:30, 50, 60, 70 PRODUTTORE: DOW CORNING
INTENDED USE: bottling and packaging plants,chemical industry, pharmaceutical industryTEMPERATURE: -40/240 °C HARDNESS: 30, 50, 60, 70MANUFACTURER: DOW CORNING
DESTINAZIONE D’USO: industria chimica, industriapetrolifera, settore automobilisticoTEMPERATURA: -20/220 °C DUREZZA: 70/80PRODUTTORE: ASAHI GLASS CO.
INTENDED USE: chemical industry, petroleumindustry, automotive industry TEMPERATURE: -20/220 °C HARDNESS: 70/80 MANUFACTURER: ASAHI GLASS CO.
DESTINAZIONE D’USO: elettrovalvole, industriachimica, rubinetteria TEMPERATURA: -30/150 °CDUREZZA: 50, 60, 70, 80, 90 PRODUTTORE: EXXON
INTENDED USE: solenoid valves, chemical industry,faucets TEMPERATURE: -30/150 °C HARDNESS: 50, 60, 70, 80, 90 MANUFACTURER: EXXON
DESTINAZIONE D’USO: elettrovalvole, industriachimica, industria petrolifera, settore automobilistico,valvole TEMPERATURA: -40/260 °C DUREZZA:50, 60, 70, 80, 90 PRODUTTORE: DUPONT
INTENDED USE: solenoid valves, chemical industry,petroleum industry, automotive industry, valvesTEMPERATURE: -40/260 °C HARDNESS: 50, 60,70, 80, 90 MANUFACTURER: DUPONT
DESTINAZIONE D’USO: impianti di refrigerazione,industria chimica, settore automobilistico, settoreferroviario, settore navale TEMPERATURA: -30/120 °CDUREZZA: 60, 70, 75 PRODUTTORE: DUPONT
INTENDED USE: refrigeration systems, chemicalindustry, automotive industry, railway industry,shipbuilding industry TEMPERATURE: -30/120 °CHARDNESS: 60, 70, 75 MANUFACTURER: DUPONT
DESTINAZIONE D’USO: oleodinamica, pneumatica,settore automobilistico TEMPERATURA: -40/130 °CDUREZZA: 50, 60, 70, 80, 90 PRODUTTORE: BAYER
INTENDED USE: oil hydraulics, pneumatics, automotiveindustry TEMPERATURE: -40/130 °C HARDNESS: 50, 60, 70, 80, 90 MANUFACTURER: BAYER
DESTINAZIONE D’USO: elettrovalvole, impianti dicondizionamento, impianti di refrigerazione,industria petrolifera, rubinetteria HQ, settoreautomobilistico, valvole TEMPERATURA: -40/150 °CDUREZZA: 60, 70, 80 PRODUTTORE: BAYER
INTENDED USE: solenoid valves, air conditioningsystems, refrigeration systems, oil industry, HQ faucets,automotive industry, valves TEMPERATURE: -40/150 °C HARDNESS: 60, 70, 80 MANUFACTURER: BAYER
DESTINAZIONE D’USO: impianti d’imbottigliamentoe confezionamento, industria chimica, industriafarmaceutica TEMPERATURA: -40/240 °CDUREZZA: 30, 50, 60, 70 PRODUTTORE: DOW CORNING
INTENDED USE: bottling and packaging plants,chemical industry, pharmaceutical industryTEMPERATURE: -40/240 °C HARDNESS: 30, 50, 60, 70;MANUFACTURER: DOW CORNING
KEL-F® NBR
SILICONE TFE
VISTALON® VITON®
THERBAN® VMQ
NEOPRENE® PERBUNAN®
MESCOLE DI GOMMA
CR
EAT
ED
BY
MA
RB
LEST
UD
IO.IT
RUBBER COMPOUNDS
SINTOIL_ITA 18-01-2011 15:09 Pagina 1
TECNICI IN GOMMA ESINTOIL SRLVia Donatello 820020 Solaro (MI) - ITALYPhone +39 02.96799075Fax +39 02.99502152info@sintoil.it - www.sintoil.itC.F. e P.IVA 03315960967
DESTINAZIONE D’USO: apparecchiature tecnichedi laboratorio, impianti di saldatura, industria chimica,macchinari per industria tessile TEMPERATURA:-25/280 °C DUREZZA: 65/70 PRODUTTORE: 3M CO.
INTENDED USE: technical equipment for laboratories,welding equipment, chemical industry, machinery forthe textile industry TEMPERATURE: -25/280 °CHARDNESS: 65/70 MANUFACTURER: 3M CO.
DESTINAZIONE D’USO: elettrovalvole, fluidodinamica,pistoni, rubinetteria, valvoleTEMPERATURA: -25/130 °C DUREZZA: 60, 70, 80, 90PRODUTTORE: ENICHEM BAYER
INTENDED USE: solenoid valves, fluid dynamics,pistons, faucets, valves TEMPERATURE: -25/130 °C HARDNESS: 60, 70, 80, 90 MANUFACTURER: ENICHEM BAYER
DESTINAZIONE D’USO: impianti d’imbottigliamentoe confezionamento, industria chimica, industriafarmaceutica TEMPERATURA: -40/240 °C DUREZZA:30, 50, 60, 70 PRODUTTORE: DOW CORNING
INTENDED USE: bottling and packaging plants,chemical industry, pharmaceutical industryTEMPERATURE: -40/240 °C HARDNESS: 30, 50, 60, 70MANUFACTURER: DOW CORNING
DESTINAZIONE D’USO: industria chimica, industriapetrolifera, settore automobilisticoTEMPERATURA: -20/220 °C DUREZZA: 70/80PRODUTTORE: ASAHI GLASS CO.
INTENDED USE: chemical industry, petroleumindustry, automotive industry TEMPERATURE: -20/220 °C HARDNESS: 70/80 MANUFACTURER: ASAHI GLASS CO.
DESTINAZIONE D’USO: elettrovalvole, industriachimica, rubinetteria TEMPERATURA: -30/150 °CDUREZZA: 50, 60, 70, 80, 90 PRODUTTORE: EXXON
INTENDED USE: solenoid valves, chemical industry,faucets TEMPERATURE: -30/150 °C HARDNESS: 50, 60, 70, 80, 90 MANUFACTURER: EXXON
DESTINAZIONE D’USO: elettrovalvole, industriachimica, industria petrolifera, settore automobilistico,valvole TEMPERATURA: -40/260 °C DUREZZA:50, 60, 70, 80, 90 PRODUTTORE: DUPONT
INTENDED USE: solenoid valves, chemical industry,petroleum industry, automotive industry, valvesTEMPERATURE: -40/260 °C HARDNESS: 50, 60,70, 80, 90 MANUFACTURER: DUPONT
DESTINAZIONE D’USO: impianti di refrigerazione,industria chimica, settore automobilistico, settoreferroviario, settore navale TEMPERATURA: -30/120 °CDUREZZA: 60, 70, 75 PRODUTTORE: DUPONT
INTENDED USE: refrigeration systems, chemicalindustry, automotive industry, railway industry,shipbuilding industry TEMPERATURE: -30/120 °CHARDNESS: 60, 70, 75 MANUFACTURER: DUPONT
DESTINAZIONE D’USO: oleodinamica, pneumatica,settore automobilistico TEMPERATURA: -40/130 °CDUREZZA: 50, 60, 70, 80, 90 PRODUTTORE: BAYER
INTENDED USE: oil hydraulics, pneumatics, automotiveindustry TEMPERATURE: -40/130 °C HARDNESS: 50, 60, 70, 80, 90 MANUFACTURER: BAYER
DESTINAZIONE D’USO: elettrovalvole, impianti dicondizionamento, impianti di refrigerazione,industria petrolifera, rubinetteria HQ, settoreautomobilistico, valvole TEMPERATURA: -40/150 °CDUREZZA: 60, 70, 80 PRODUTTORE: BAYER
INTENDED USE: solenoid valves, air conditioningsystems, refrigeration systems, oil industry, HQ faucets,automotive industry, valves TEMPERATURE: -40/150 °C HARDNESS: 60, 70, 80 MANUFACTURER: BAYER
DESTINAZIONE D’USO: impianti d’imbottigliamentoe confezionamento, industria chimica, industriafarmaceutica TEMPERATURA: -40/240 °CDUREZZA: 30, 50, 60, 70 PRODUTTORE: DOW CORNING
INTENDED USE: bottling and packaging plants,chemical industry, pharmaceutical industryTEMPERATURE: -40/240 °C HARDNESS: 30, 50, 60, 70;MANUFACTURER: DOW CORNING
KEL-F® NBR
SILICONE TFE
VISTALON® VITON®
THERBAN® VMQ
NEOPRENE® PERBUNAN®
MESCOLE DI GOMMA
CR
EAT
ED
BY
MA
RB
LEST
UD
IO.IT
RUBBER COMPOUNDS
SINTOIL_ITA 18-01-2011 15:09 Pagina 1