+ All Categories
Home > Documents > Catalogo Columbus 2011

Catalogo Columbus 2011

Date post: 03-Mar-2015
Category:
Upload: kapok
View: 133 times
Download: 3 times
Share this document with a friend
45
2011
Transcript
Page 1: Catalogo Columbus 2011

2011

Page 2: Catalogo Columbus 2011

2011

Page 3: Catalogo Columbus 2011

GENIUS carbon monocoque frame

TELAIO MONOSCOCCA GENIUSIl nuovo nato in casa Columbus, è un telaio monoscocca realizzato attraverso la sovrapposizione di fibra di carbonio ad alto modulo, polimer-izzata mediante la tecnica dell’High Pressure Curing. Le dimensioni decisamente over del tubo obliquo e dello sterzo fanno subito trasparire le caratteristiche di estrema rigidità di questo telaio dal peso inferiore ai 950g. Le costolature laterali del tubo orizzontale contribuiscono alla rigidezza laterale di tutta la struttura aumentando la guidabilità della bicicletta anche nelle condizioni più estreme. La scatola movimento oversize BB30 ed il posteriore orizzontale single plug a sezione alta, aumentano l’efficienza della pedalata minimizzando le deformazioni laterali e sottolineando la caratteristica decisamente racing del telaio Genius. Il tubo sterzo da 1” 1/2 nella parte inferiore, distribuisce meglio i carichi aumentando la durata del cuscinetto. La nuova forcella Genius monoscocca integra perfettamente le caratteristiche del telaio: estrema maneggevolezza e stabilità. La testa della forcella decisamente oversize si raccorda al tubo sterzo conico seguendo il più possibile percorsi rettilinei, cambi di direzione improvvisi fanno lavorare la fibra di carbonio in maniera non ottimale. La zona testa/sterzo è particolar-mente rigida mentre i foderi hanno un coefficiente di rigidezza più basso lungo l’asse sterzo, in questo modo la forcella è in grado di filtrare le vibrazioni ad alta frequenza e bassa intensità indotte dal terreno.

GENIUS MONOCOQUE FRAME The new born in Columbus is a monocoque frame made with overlapped high modulus Carbon fibre, bonded in High Pressure Curing. The oversize dimensions of the down and head tubes give tremendous rigidity to this frame weighing less than 950g. The lateral ribs of the horizontal tube give lateral stiffness to the whole structure, improving bike handling in the toughest conditions. The oversize BB30 bottom bracket and the single plug high profile chain stays, increase the efficiency when pedalling and minimise lateral deformation, making Genius a true racing frame. The head tube measuring 1” ½ in the lower section, increases the life time of the bearings as it evens the loads. The new Genius monocoque fork perfectly matches the frame: great handling and stability properties. The oversize fork head follows straight lines to fit the conic shaped steering tube, since sudden changes of direction or sharp angles, don't work with carbon. The head/head tube area is particularly stiff , whilst the blades are less stiff on the head tube axis, so that the fork dampens any kind of vibration.

Page 4: Catalogo Columbus 2011

SL CARBON monocoque frame

Page 5: Catalogo Columbus 2011

GEOMETRIE TELAI

Page 6: Catalogo Columbus 2011

CARBON XLR8R MAX

Page 7: Catalogo Columbus 2011

CARBON XLR8R PLUS

Page 8: Catalogo Columbus 2011

SeatpostGHOST

REGGISELLA GHOSTIl nuovo reggisella Columbus, con stelo in fibra di carbonio, letteralmente ‘scompare’

all’interno del tubo sella Columbus integrato, lasciando uscire la sola testina in alluminio

che attraverso due viti consente una perfetta micro regolazione della sella. La tenuta del

reggisella avviene attraverso un sistema ad espansione del gambo per mezzo di una vite

in acciaio. La presenza sotto la testa di due distanziali in alluminio rimuovibili, consente

una regolazione in altezza di 5 o 10mm. L’anello inferiore nasconde completamente la

linea di telaio del tubo sella, garantendo una perfetta integrazione dell’insieme.

GHOST SEATPOSTThe new Columbus seatpost with its Carbon pillar, literally disappears inside the Colum-bus integrated seat tube, leaving only the Aluminium head visible. The Aluminium head is equipped with 2 bolts to consent micro adjustments of the saddle, whilst a steel bolt expands the pillar so that the seat post is held in place. Two removable rings are placed under the head to allow an adjustment of 5-10mm in height. The lower ring completely covers the edge of the seat tube, obtaining a perfect integrated system

Page 9: Catalogo Columbus 2011

ForkGENIUS

Ultima creazione del Columbus Carbon Lab, in T700 ed HM, ha delle caratteristiche fortemente innovative. La speciale forma dei foderi, grazie alla particolare curvatura progressiva, insieme all’arretramento di 5mm del loro innesto con la testa forcella, conferiscono una straordinaria capacità di assorbimento delle micro vibrazioni indotte dal terreno. La rigidezza laterale è stata migliorata grazie alla generosa sezione dei foderi nella parte alta ed alle dimensioni oversize della testa forcella. Il cannotto sterzo, anch’esso totalmente in fibra di carbonio, ha un andamento conico che porta il diametro da 1” 1/2 a 1” 1/8 evitando così improvvisi salti di sezione e mantenendo le fibre il più rettilinee possibile in modo da evitare pericolose concentrazioni di sforzo e facendo lavorare la fibra di carbonio in modo più ottimale. Genius è la forcella che meglio si adatta ai telai in carbonio di ultima generazione per aumentare la rigidità complessiva del telaio e minimizzare i pesi.

SODDISFA I REQUISITI DELLA NUOVA NORMATIVA DI SICUREZZA EUROPEA EN14781.

Caratteristiche:Forcella monoscocca in fibra di carbonioComposizione: fibre di carboni unidirezionali T700Cannotto in carbonio conico 1” ½ - 1” 1/8 di lunghezza 300mmForcellini forgiati in Al 6061 T6Rake: 45mmPeso: 390gr

The latest creation from the Columbus Carbon Lab, this full monocoque T700 High Modulus carbon fibre fork is characterised by the use of several decidedly new technologies. The shape of the fork blades, given by the particular progressive curve and 5mm setback from the position in which they are connected to the fork, produce an extraordinary capacity to absorb the micro-vibrations of the terrain. Also: the lateral rigidity of the fork has been greatly improved thanks to the generous section of the blades and the upper oversized part of the crown. The steerer tube has a conical section which takes the upper 1 1/8” diameter to 1 ½” in the bottom part without any noticeable jump in section, maintaining a completely linear lay-up of the fibres, thus avoiding dangerous concentrations of force and making the fibres work in the fashion best suited to the material. Genius is the fork best suited to the latest generation of carbon fibre frames, augmenting the overall rigidity of the frame and minimising weight.

MEETS THE NEW EUROPEAN SAFETY STANDARD : EN 14781.

Characteristics:Monocoque Carbon Fibre forkMaterial: unidirectional high modulus carbon fibre T700Conical carbon fibre steerer 1”1/8 – 1” ½ in 300mm lengthForged dropouts Al 6061 T6Rake: 45mm

Page 10: Catalogo Columbus 2011

FORCELLA MINIMAL

ForkMINIMAL

Novità assoluta Columbus è MINIMAL, la nuova forcella monoscocca dalla linea essenziale e sobria, progettata per telai con sterzo tradizionale, in particolare per i telai

realizzati con tubazioni in acciaio che per la loro essenzialità non si prestano ad essere

assemblati con forcelle oversize. La forcella, realizzata attraverso la sovrapposizione di

strati di fibra di carbonio di derivazione aerospaziale, è disponibile nella versione con

cannotto da 1” 1/8 con rake 45 o 50mm. Il modello con cannotto da 1” è disponibile con rake da 45mm. La curvatura progressiva dei foderi garantisce un ottimo smorzamento

delle vibrazioni garantendo una elevata stabilità di guida anche nelle condizioni più estreme.

SODDISFA I REQUISITI DELLA NUOVA NORMATIVA DI SICUREZZA EUROPEA:

EN 14781

Caratteristiche:

Forcella in monoscocca di carbonio

Composizione: fibre di carbonio unidirezionali T700

Cannotto in carbonio Ø 25.4 - Ø 28.6 mm L = 300 mm

Forcellini forgiati in AL 6061 T6

Rake:45 solo per Ø 25.4 mm

Rake:45 - 50 mm solo per Ø 28.6 mm

MINIMAL FORKThe new monocoque fork of Columbus is called Minimal, with its essential and sober line, it has been developed for traditional head sets, particularly for steel frames, as their essential lines don’t complement oversize forks. The fork, made with overlapped layers of Carbon fibre used in the aeronautical industry, is available in the 1” 1/8 version with rake of 45 or 50mm; whilst the 1” version is available with 45mm rake. The progressive curve of the fork blades dampness vibrations and guarantees great handling stability also in extreme conditions.

MEETS THE NEW EUROPEAN SAFETY STANDARD: EN 14781

Caratteristics:Carbon monocoque forkComposition: unidirectional T700 Carbon Fibrer Carbon steering column Ø 25.4 - Ø 28.6 mm L=300 mmForged dropouts in AL 6061 T6 Rake: 45 - 50 mm only for Ø 28.6 mm

Page 11: Catalogo Columbus 2011

ForkCARVE

Page 12: Catalogo Columbus 2011

ForkCARVE MEGA

Page 13: Catalogo Columbus 2011

FORCELLA TUSK AIR

Non poteva mancare nella gamma di forcelle in carbonio Columbus, un modello dal profilo aerodinamico, sviluppato per le biciclette da crono o triathlon. I foderi in fibra di carbonio

presentano un profilo che riduce al minimo il drag della forcella grazie alla sezione dal

profilo NACA, studiato per ottenere le migliori prestazioni alle alte velocità. I foderi presen-tano una curvatura nel bordo posteriore per aumentare il confort di guida. La testa forcella

ed i forcellini appositamente progettati per seguire il profilo a sezione allungata sono realizzati in lega di alluminio come il cannotto del diametro di 1” 1/8.

SODDISFA I REQUISITI DELLE NUOVE NORMATIVE DI SICUREZZA EUROPEA:

EN 14781.

Caratteristiche:

Forcella con foderi in fibra di carbonio a sezione differenziata

Testa e forcellini in alluminio 6061 forgiato

Cannotto in alluminio 7075 T6 diametro Ø 28.6 mm e lunghezza 300 mm

Rake:45 mm

TUSK AIR FORK

A model with an aerodynamic profile, designed for triathlon and time trial bicycles, could not be missed off the Columbus fork line. Thanks to the NACA profile section, developed to obtain the best performance at top speed, the special profile of the Carbon blades reduce to the minimum the drag of the fork. The fork blades also present a special curve in the rear section to increase handling comfort. The fork head, the drop outs, especially designed to match the stretched profile of the fork, and the 1” 1/8 steerer, are in Aluminium alloy.

MEETS THE NEW EUROPEAN SAFETY STANDARD : EN 14781.

Characteristics: Carbon fibre blades with variable section Forged aluminium 6061 AL 7075 T6 steering column Ø 28.6 mm L=300 mmRake: 45mm

ForkTUSK AIR

Page 14: Catalogo Columbus 2011

ForkTUSK STRAIGHT

Page 15: Catalogo Columbus 2011

ForkTUSK LIGHT

Page 16: Catalogo Columbus 2011

ForkTUSK

Page 17: Catalogo Columbus 2011

ForkTUSK MEGA

Page 18: Catalogo Columbus 2011

ForkTUSK TREKKING

Page 19: Catalogo Columbus 2011

ForkTUSK CROSS

Page 20: Catalogo Columbus 2011

2011

Page 21: Catalogo Columbus 2011

Seamless triple butted

Made in Italy

Patented stainless steel tubes

XCr

Page 22: Catalogo Columbus 2011
Page 23: Catalogo Columbus 2011

XCR for lugsSeamless triple butted

Made in Italy

Patented stainless steel tubes

XCr

Page 24: Catalogo Columbus 2011

SPIRIT NIOBIUM STEEL ALLOY

Progressive butted H.S.L.A.

Made in Italy

Fine grain Niobium doped tubes

SPIRIT

Page 25: Catalogo Columbus 2011
Page 26: Catalogo Columbus 2011

NIOBIUM STEEL ALLOY

Progressive butted H.S.L.A.

Made in Italy

Fine grain Niobium doped tubes

SPIRITSPIRIT for lugs

Page 27: Catalogo Columbus 2011

SL NIOBIUM

Page 28: Catalogo Columbus 2011

LIFE

Page 29: Catalogo Columbus 2011
Page 30: Catalogo Columbus 2011

LIFE

Page 31: Catalogo Columbus 2011

29’r

Page 32: Catalogo Columbus 2011

MAX

Page 33: Catalogo Columbus 2011

MINIMAX

Page 34: Catalogo Columbus 2011

ZONA

Page 35: Catalogo Columbus 2011

ZONA

Page 36: Catalogo Columbus 2011
Page 37: Catalogo Columbus 2011

CROMOR

Page 38: Catalogo Columbus 2011

CROMOR

Page 39: Catalogo Columbus 2011

FORK STEERERS

Page 40: Catalogo Columbus 2011

COMPONENTI PER TELAI IN ACCIAIO STEEL FRAME COMPONENTS

Page 41: Catalogo Columbus 2011

2011

Page 42: Catalogo Columbus 2011

AIRPLANE

Page 43: Catalogo Columbus 2011

AIRPLANE

Page 44: Catalogo Columbus 2011
Page 45: Catalogo Columbus 2011

AIRPLANE


Recommended