Date post: | 01-Jul-2015 |
Category: |
Technology |
Upload: | pipperss |
View: | 433 times |
Download: | 3 times |
NAS on Raspberry
Stefano BallardiniStefano Ballardini 10262013 @ I.I.S. Alberghetti - Imola 11092013 @ Sala Consigliare Comune di Faenza - Faenza
Un Network Attached Storage (NAS) è un dispositivo collegato ad una rete di computer la cui funzione è quella di condividere tra gli utenti della rete una memoria di massa, in pratica costituita da uno o più dischi rigidi
(from Wikipedia)
DEFINIZIONE DI N.A.S.
VANTAGGI
- Dati centralizzati- Dati in sicurezza
PRIMO INGREDIENTE: il RaspBerry PiDEFINIZIONE DI RASPBERRY PI
Il Raspberry Pi è un single-board computer (un calcolatore implementato su una sola scheda elettronica) sviluppato nel Regno Unito dalla Raspberry Pi Foundation
( from Wikipedia )
http://www.raspberrypi.org/
CARATTERISTICHE HW DEL RASPBERRY
SECONDO INGREDIENTE: SdCard compatibile
http://elinux.org/RPi_SD_cards
http://www.raspberrypi.org/
TERZO INGREDIENTE: la RaspbianDEFINIZIONE
Raspbian is a free operating system based on Debian optimized for the Raspberry Pi hardware
- www.raspbian.org
- http://www.raspberrypi.org/downloads
+ = Raspbian
INSTALLAZIONE di Raspbian:
dd bs=4M if=immagine-wheezy-raspbian.img of=/dev/X
INSTALLAZIONE di Raspbian:
dd bs=4M if=immagine-wheezy-raspbian.img of=/dev/X
AGGIUNTA IP di RETE:
Modifica di /etc/network/interface di Raspbian
iface eth0 inet static address 192.168.0.10 netmask 255.255.255.0 gateway 192.168.0.1 broadcast 192.168.0.0
RAGGIUNGIAMO IL RASPBERRY:
- Configurazione ip sul pc locale- Accensione del Raspberry- Collegamento al Raspberry via SSH
PRIME CONFIGURAZIONI:# raspi-config
MA CHE ASPETTO HA STA RASPBIAN ?
- utilizziamo un server VNC: - ci colleghiamo al Raspberry via ssh - # apt-get install tightvncserver - $ tightvncserver :1 -geometry 800x600
- dal pc locale usiamo un client vnc per vedere RS - # apt-get install xtightvncwiever - $ xtightvncwiever 192.168.0.10:1
MA CHE ASPETTO HA STA RASPBIAN ?
QUARTO INGREDIENTE: Open Media VaultDEFINIZIONE
OpenMediaVault is the next generation network attached storage (NAS) solution based on Debian Linux. It contains services like SSH, (S)FTP, SMB/CIFS, DAAP media server, RSync, BitTorrent client and many more. Thanks to the modular design of the framework it can be enhanced via plugins.
Iso disponibili per cpu x86 a 32 e 64 bit
REPOSITORY DI OPENMEDIAVAULT e INSTALLAZIONE
Aggiungiamo i repo nel /etc/apt/sources.listdeb http://packages.omv-plugins.org fedaykin maindeb http://packages.omv-plugins.org fedaykin-armhf main
apt-get updateNO_PUBKEY 68EA3C673512CBCF
Prendere la chiave conwget -O - http://packages.omv-plugins.org/omv-plugins.pub|apt-key add -
apt-get updateapt-get install openmediavault
TRUBLESHOOTING
Si sono verificati degli errori nell'elaborazione: tftpd-hpa openmediavaultE: Sub-process /usr/bin/dpkg returned an error code (1)
Modificare il file /etc/default/tftpd-hpa, ultima riga, in questo modo:TFTP_OPTIONS="--secure –ipv4"
apt-get install openmediavault
CONFIGURAZIONE DI OPENMEDIAVAULT
Browser, ip del NAS
adminopenmediavault
BUONA CONFIGURAZIONE !
CONFIGURAZIONE SAMBA on OMV web interface
- Impostazioni: Gruppo di lavoro- Condivisioni: Nome Condivisione
Cartella condivisa Vari parametri
SAMBA on OMV
LATO CLIENT:- usare il classico file manager
SAMBA on OMV TROUBLESHOOTING
LATO CLIENT- Cotrollare /etc/samba/smb.conf
CONFIGURAZIONE NFS on OMV web interface AND TROUBLESHOOTING
- Impostazioni: Abilitare NFS- Condivisioni: Risorsa Condivisa
Range IP Permessi
E in più.....
CONFIGURAZIONE NFS on OMV web interface AND TROUBLESHOOTING
E in più....
Lato Raspberry-OMV:
- installare rpcbind- controllare /etc/default/nfs-common NEED_IDMAPD=yes NEED_GSSD=no- controllare /etc/default/nfs-kernel-server NEED_SVCGSSD=no- controllare /etc/exports sostituire ro con rw - i servizi NFS non partono in automatico /etc/init.d/nfs-common start /etc/init.d/nfs-kernel-server start /etc/init.d/rpcbind start- NFS in automatico update-rc.d rpcbind enable && update-rc.d nfs-common enable
CONFIGURAZIONE NFS on OMV web interface AND TROUBLESHOOTING
E in più....
Lato Client:
- installare nfs-common- controllare /etc/default/nfs-common NEED_IDMAPD=yes- controllare le risorse “exportate” del NAS showmount -e 192.168.0.10- creare la directory in cui montare la risorsa remota mkdir /home/nfs- montiamo staticamente la risorsa condivisa sul NAS mount -t nfs4 -o _netdev,hard,intr 192.168.0.10:/ home/nfs
E in più....
Grazie per l'attenzione e buon Raspberry a tutti !
www.imolug.org http://www.imolug.org/MailingList https://www.facebook.com/ImoLUG