7/24/2019 Accessori Stazioni Radio[1]
1/28
SITETOOLS
Radio Station Accessories
ca lzavarah e l p i n g w o r d s t o f l y
Alllegalrightsinthisdocum
entaretheexclusivepropertyofcalzavaraandnopartofitmayb
ereproducedorcommunicatedtoanyotherpartywithoutourau
thorization.
Alldatainthiscatalogueisforreferenceonlyandma
ybechangedwithoutnotice,
inlinewithourpolicyofcontinuous
technicaldevelopment.
SGS
I
SO
900
1
7/24/2019 Accessori Stazioni Radio[1]
2/28
calz
avar
a
calz
avar
a
calz
avara
calz
avara
calz
avara
calz
avara
calzav
ara
calzav
ara
calza
vara
calz
avar
a
calz
avara
calz
avara
calzav
ara
calza
vara
calza
vara
Alllegalrightsinthisdocum
entaretheexclusivepropertyofcalzavaraandnopartofitmayb
ereproducedorcommunicatedtoanyotherpartywithoutourau
thorization.
Alldatainthiscatalogueisforreferenceonlyandma
ybechangedwithoutnotice,
inlinewithourpolicyofcontinuous
technicaldevelopment.
calzavara - tel. +39 0432 84381 fax +39 0432 848997 www.calzavara.i t [email protected] - Catalogue 2004 - page 156
GENERAL DESCRIPTION
ANTENNA MOUNTS in hot-dip galvanized steel are designed
for different types of antenna and are compatible with the
most commonly used support infrastructures (poles, towers,
roof-top structures).
Components range from simple, fixed supports to mounts
with high precision mechanisms, for fast and precise
radioelectric orientation.
WINDBRACES
Stabilising rods in hot-dip galvanized steel, whose function is
to increase the stiffness of dish antennas and T-arm antenna
mounts.
Generally installed for larger diameter antennas (more than
1.0 m), windbraces can be fixed directly to a pipe mount
anchored to a telescopic arm or, in the case of side mounts on
working platforms, to one of the guardrails.
PROTECTION COMPONENTS FOR RADIANT SYSTEMS
include ice protection covers, dust and damp protected boxesfor R.F. terminations as well as radomes in high quality,
durable Hypalon fabric for dish antennas.
PIPE BRACKETS & ATTACHMENTS in hot-dip galvanized
steel are designed to solve problems related to the
installation and fixing of radiant systems, windbraces and pipe
mounts on non-standard metal structures and on buildings.
CLAMPS & MODULAR SUPPORTING DEVICES include
stainless steel clamps, ideal for ensuring perfect installation
of cables and wave guides on any type of support, and
aluminium alloy, modular support components for internal
and external use (cable bridges, brackets, rungs, etc.). See
also CLAMPCO SISTEMI Plant Accessories section on page
204.
WATERPROOF ENTRIES are modular components in
aluminium alloy, suitable for wall and roof installation. See
CLAMPCO SISTEMI Plant Accessories section on page 212.
GROUNDING PROTECTION carries the electrical discharge
picked up by the structures and coaxial cable to ground. See also
CLAMPCO SISTEMI Plant Accessories section on page 211.
AIRCRAFT WARNING LIGHT SYSTEMS, supplied as systems
with steady and flashing lights, with traditional incandescent
and low energy bulbs, as well as in the new LED array
configuration. See CLAMPCO SISTEMI Plant Accessories section
on page 193.
HORIZONTAL CABLE BRIDGES in hot-dip galvanized steel
are supplied complete with all the support accessories, such
as ground supporting frames, fixed and variable curve
components.
BALLAST COMPONENTS are used to fix antennas supporting
structures on roof areas or instead of foundations for the
kitstat or MOBISTAT articles.
The range is completed by adjustable length CLIMBING
LADDERS in hot-dip galvanized steel and fixing systems for
installation on buildings or on existing metal structures.
FENCING products in the catalogue include plastic-coated
wire mesh fencing and metal grating panels, as well as vehicle
and pedestrian access gates.
CUSTOM PRODUCTS
calzavara is able to develop accessories to meet specific
Customer requirements. Please contact our Customer Care
department ([email protected]); we shall be pleased
to send you a technical proposal and quotation to suit your
specific requirements.
Building or upgrading of a radio station requires a wide range of components, both for the installation of antennas, feeders and power
cables and for erecting the infrastructures themselves.
With more than thirty years experience gained in the field, calzavara is able to offer a wide choice of accessories for the installation
and management of large and small radio centres.
SITETOOLS Radio Station Accessories
7/24/2019 Accessori Stazioni Radio[1]
3/28
calz
avar
a
calz
avar
a
calz
avara
calz
avara
calz
avara
calz
avara
calzav
ara
calzav
ara
calza
vara
calz
avar
a
calz
avara
calz
avara
calzav
ara
calza
vara
calza
vara
Alllegalrightsinthisdocum
entaretheexclusivepropertyofcalzavaraandnopartofitmayb
ereproducedorcommunicatedtoanyotherpartywithoutourau
thorization.
Alldatainthiscatalogueisforreferenceonlyandma
ybechangedwithoutnotice,
inlinewithourpolicyofcontinuous
technicaldevelopment.
calzavara - tel. +39 0432 84381 fax +39 0432 848997 www.calzavara.i t [email protected] - Catalogue 2004 - page 157
3
9
4
8
1
2
11
10
7
5
6
12
GROUNDING PROTECTION
(see also CLAMPCO SISTEMI Plant Accessoriessection on page 211)
7
PIPE BRACKETS
& ATTACHMENTS
MODULAR SUPPORTING DEVICES
(see also CLAMPCO SISTEMI Plant Accessoriessection on page 215)
WINDBRACES
ANTENNA MOUNTS
CLAMPS
(see CLAMPCO SISTEMI Plant Accessories section
on page 204)
WATERPROOF ENTRIES
(see CLAMPCO SISTEMI Plant Accessories sectionon page 212)
PROTECTION COMPONENTS
FOR RADIANT SYSTEMS
AIRCRAFT WARNING LIGHT SYSTEMS
(see CLAMPCO SISTEMI Plant Accessories sectionon page 193)
CLIMBING LADDERS
HORIZONTAL CABLE BRIDGES
FENCING
1
3
2
4
5
10
9
12
11
6
8
SITETOOLS Radio Station Accessories
7/24/2019 Accessori Stazioni Radio[1]
4/28
calz
avar
a
calz
avar
a
calz
avara
calz
avara
calz
avara
calz
avara
calzav
ara
calzav
ara
calza
vara
calz
avar
a
calz
avara
calz
avara
calzav
ara
calza
vara
calza
vara
A
H
INSTALLATION EXAMPLE
+ W
FRONT VIEW SIDE VIEW
PLAN VIEW
Antenna pipe dimensions
A
mm mm mm mm
TAAR 5000
TAAR 5031
TAAR 5032
TAAR 5033
TAAR 5041
TAAR 5042
TAAR 5043
150
150
150
150
150
150
150
15
15
15
15
15
15
15
5
5
5
5
5
5
5
5000
5000
5000
5000
5000
5000
5000
no
3
3
3
4
4
4
-
76
76
76
76
76
76
-
1500
2500
3000
1500
2500
3000
Zenith adjustmentT-arm dimensions
Qty
down
W - Width
n
H - Height
degree
up
+
114 mm
horizontal support member100mm square section tube
Article
Alllegalrightsinthisdocum
entaretheexclusivepropertyofcalzavaraandnopartofitmayb
ereproducedorcommunicatedtoanyotherpartywithoutourau
thorization.
Alldatainthiscatalogueisforreferenceonlyandma
ybechangedwithoutnotice,
inlinewithourpolicyofcontinuous
technicaldevelopment.
calzavara - tel. +39 0432 84381 fax +39 0432 848997 www.calzavara.i t [email protected] - Catalogue 2004 - page 158
art. TAAR 50.. 5 m T-arm antenna mount with micrometric zenith adjustment
These T-arm mounts with a usable width of 5.0 m, are able to
support up to 6 omnidirectional or panel antennas fixed on
special pipe mounts (art. PMAR .) at any point along the
horizontal 100 mm square section tube. This member is divided
into three sections, the two outer sections pivot horizontally, inorder to help antenna installation and maintenance.
The mount, in hot-dip galvanized steel, is equipped with a
mechanical orientation system which allows precise tilting of the
antennas.
Azimuth adjustment is achieved by rotating the whole T-arm
mount around its vertical axis. The assembly is then locked in
position by means of windbraces (art. WBAR .).
All the mechanical adjustment components are in bronze and
stainless steel.
The T-arm is anchored to the main structure (tower, pole, etc),
by means of two fixing collars for 114 mm pipes.
ANTENNA MOUNTS
SITETOOLS Radio Station Accessories
7/24/2019 Accessori Stazioni Radio[1]
5/28
calz
avar
a
calz
avar
a
calz
avara
calz
avara
calz
avara
calz
avara
calzav
ara
calzav
ara
calza
vara
calz
avar
a
calz
avara
calz
avara
calzav
ara
calza
vara
calza
vara
SIDE VIEW
PLAN VIEW
FRONT VIEW
A
H
W-+
114 mm
Antenna pipe dimensions
A
mm mm mm
TAAR 5500
TAAR 5531
TAAR 5532
TAAR 5533
TAAR 5541
TAAR 5542
TAAR 5543
TAAR 5100
TAAR 5131
TAAR 5132
TAAR 5133
TAAR 5141
TAAR 5142
TAAR 5143
500
500
500
500
500
500
500
15
15
15
15
15
15
15
5
5
5
5
5
5
5
no
3
3
3
4
4
4
-
76
76
76
76
76
76
-
1500
2500
3000
1500
2500
3000
Zenith adjustmentT-armdimensions
Qty
down
A
mm
1000
1000
1000
1000
1000
1000
1000
T-armdimensions
n
H - Height
degree
up
+
T-armdimensions
mm
5000
5000
5000
5000
5000
5000
5000
W
horizontal support member
100mm square section tube
Article Article
INSTALLATION EXAMPLE
Alllegalrightsinthisdocum
entaretheexclusivepropertyofcalzavaraandnopartofitmayb
ereproducedorcommunicatedtoanyotherpartywithoutourau
thorization.
Alldatainthiscatalogueisforreferenceonlyandma
ybechangedwithoutnotice,
inlinewithourpolicyofcontinuous
technicaldevelopment.
calzavara - tel. +39 0432 84381 fax +39 0432 848997 www.calzavara.i t [email protected] - Catalogue 2004 - page 159
SITETOOLS Radio Station Accessories
art. TAAR 51.. 55... 5 m T-arm antenna mount with zenith adjustment & support bracket
These T-arm mounts with a usable width of 5.0 m, are able to
support up to 6 omnidirectional or panel antennas fixed on
special pipe mounts (art. PMAR .), at any point along the
horizontal 100 mm square section tube. This member is divided
into three sections, the two outer sections pivot horizontally, inorder to help antenna installation and maintenance.
The T-arm, is completed with a 500 or 1000 mm long support
bracket, which enables the arm to be held at a distance from the
structure on which it is to be anchored. This avoids interference
with other components and/or antenna support structures.
The mount, in hot-dip galvanized steel, is equipped with a
mechanical orientation system which allows precise tilting of the
antennas.
Azimuth adjustment is achieved by rotating the whole T-arm
around its vertical axis. The assembly is then locked in position by
means of windbraces (art. WBAR .).All the mechanical adjustment components are in bronze and
stainless steel.
The T-arm mount is anchored to the main structure (tower, pole,
etc) by means of two fixing collars for 114 mm pipes.
ANTENNA MOUNTS
7/24/2019 Accessori Stazioni Radio[1]
6/28
calz
avar
a
calz
avar
a
calz
avara
calz
avara
calz
avara
calz
avara
calzav
ara
calzav
ara
calza
vara
calz
avar
a
calz
avara
calz
avara
calzav
ara
calza
vara
calza
vara
SIDE VIEW
INSTALLATION EXAMPLE
FRONT VIEW
A
+
H
W
Antenna pipe dimensions
A
mm mm mm mm
TAAR 5200
TAAR 5231
TAAR 5232
TAAR 5233
TAAR 5241
TAAR 5242
TAAR 5243
150
150
150
150
150
150
150
15
15
15
15
15
15
15
5
5
5
5
5
5
5
5000
5000
5000
5000
5000
5000
5000
no
3
3
3
4
4
4
-
76
76
76
76
76
76
-
1500
2500
3000
1500
2500
3000
Zenith adjustment Azimut adjustmentT-arm dimensions
Qty
down
W - Width
n
H - Height
degree
+
up downup
15
15
15
15
15
15
15
15
15
15
15
15
15
15
degree
+
horizontal support member100 mm square section tube
114 mm
+
-
Article
Alllegalrightsinthisdocum
entaretheexclusivepropertyofcalzavaraandnopartofitmayb
ereproducedorcommunicatedtoanyotherpartywithoutourau
thorization.
Alldatainthiscatalogueisforreferenceonlyandma
ybechangedwithoutnotice,
inlinewithourpolicyofcontinuous
technicaldevelopment.
calzavara - tel. +39 0432 84381 fax +39 0432 848997 www.calzavara.i t [email protected] - Catalogue 2004 - page 160
art. TAAR 52.. 5m T-arm mount with micrometric zenith & azimuth adjustments
ANTENNA MOUNTS
These T-arm mounts with a usable width of 5.0 m, are able to
support up to 6 omnidirectional or panel antennas fixed on
special pipe mounts (art. PMAR .) at any point along the
horizontal 100 mm square section tube. This member is divided
into three sections, the two outer sections pivot horizontally, inorder to help antenna installation and maintenance.
The mount, in hot-dip galvanized steel, is equipped with a
mechanical fine adjustment system, which allow precise zenith
(-15, +5) and azimuth (15) orientation of the antennas.
The assembly is then locked in position by means of windbraces
(art. WBAR .).
All the mechanical adjustment components are in bronze and
stainless steel.
The T-arm is supplied complete with a 114 mm pipe mount;
anchoring to the main structure is by means of special fixing
collars (art. PBTP).
SITETOOLS Radio Station Accessories
7/24/2019 Accessori Stazioni Radio[1]
7/28
calz
avar
a
calz
avar
a
calz
avara
calz
avara
calz
avara
calz
avara
calzav
ara
calzav
ara
calza
vara
calz
avar
a
calz
avara
calz
avara
calzav
ara
calza
vara
calza
vara
SIDE VIEW
PLAN VIEW
FRONT VIEW
SIDE VIEW
PLAN VIEW
FRONT VIEW
Antenna pipe dimensions
mm mm mm
TAAR 2000
TAAR 2021
TAAR 2022
TAAR 2023
TAAR 3000
TAAR 3021
TAAR 3022
TAAR 3023
2000
2000
2000
2000
3000
3000
3000
3000
no
2
2
2
no
2
2
2
-
60
60
60
-
60
60
60
-
1500
2500
3000
-
1500
2500
3000
T-armdimensions
QtyW - Width
n
H - Height
H
W
Article
horizontal support member80 mm square section tube
mount 89-114 mm
SUPPLY CONFIGURATION
INSTALLATION EXAMPLE
Article Antenna pipe dimensions
mm mm mm
TAAR 2100
TAAR 2121
TAAR 2122
TAAR 2123
TAAR 3100
TAAR 3121
TAAR 3122
TAAR 3123
15
15
15
15
15
15
15
15
5
5
5
5
5
5
5
5
2000
2000
2000
2000
3000
3000
3000
3000
no
2
2
2
no
2
2
2
-
60
60
60
-
60
60
60
-
1500
2500
3000
-
1500
2500
3000
Zenith adj.T-armdimension
Qty
down
W - Width
n
H - Height
degree
+
up
H
W +
mount 89-114 mm
horizontal support member80 mm square section tube
calzavara - tel. +39 0432 84381 fax +39 0432 848997 www.calzavara.i t [email protected] - Catalogue 2004 - page 161
ANTENNA MOUNTS
SITETOOLS Radio Station Accessories
art. TAAR 20.. 30.. 2 & 3m T-arm antenna mounts
art. TAAR 21.. 31.. 2 & 3m T-arm antenna mounts with micrometric zenith adjustment
These T-arm mounts with a usable width of 2.0 and 3.0 m, are
able to support up to two omnidirectional or panel antennas fixed
on special pipe mounts (art. PMAR .) at any point along the
horizontal support member, which is in 80 mm square section
tube.The T-arm mount, in hot-dip galvanized steel, is anchored to the
main structure (tower, pole, etc) by means of two universal
brackets for 89-114 mm pipes.
These T-arm mounts with a usable width of 2.0 and 3.0 m, are
able to support up to two omnidirectional or panel antennas fixed
on special pipe mounts (art. PMAR .) at any point along the
horizontal support member, which is in 80 mm square section
tube.
The mount, in hot-dip galvanized steel, is equipped with a
mechanical orientation system which allows sharp tilting of the
antennas.
The T-arm mount is anchored to the main structure (tower, pole,
etc) by means of two universal brackets for 89-114 mm pipes.
Alllegalrightsinthisdocum
entaretheexclusivepropertyofcalzavaraandnopartofitmayb
ereproducedorcommunicatedtoanyotherpartywithoutourau
thorization.
Alldatainthiscatalogueisforreferenceonlyandma
ybechangedwithoutnotice,
inlinewithourpolicyofcontinuous
technicaldevelopment.
7/24/2019 Accessori Stazioni Radio[1]
8/28
calz
avar
a
calz
avar
a
calz
avara
calz
avara
calz
avara
calz
avara
calzav
ara
calzav
ara
calza
vara
calz
avar
a
calz
avara
calz
avara
calzav
ara
calza
vara
calza
vara
FRONT VIEW SIDE VIEW
PLAN VIEW
SUPPLY CONFIGURATION
INSTALLATION EXAMPLE
Article Antenna pipe dimensions
mm mmn mm
TAAR 3200
TAAR 3221
TAAR 3222
TAAR 3223
15
15
15
15
5
5
5
5
3000
3000
3000
3000
no
2
2
2
-
60
60
60
-
1500
2500
3000
Zenith adj.T-armdimensions
Qty
down
W - Width H - Height
degree
+
up
H
W+
mount 89-114 mm
horizontal support member
80 mm square section tube
H
SUPPLY CONFIGURATION
Antenna pipes Fixing to horizontal member
mm mm
TAPM 6015
TAPM 6020
TAPM 6025
TAPM 6030
TAPM 7615
TAPM 7625
TAPM 7630
60
60
60
60
76
76
76
80
80
80
80
100
100
100
1500
2000
2500
3000
1500
2500
3000
mm
H - Height B
B
horizontal support memberin square section tube
Article
calzavara - tel. +39 0432 84381 fax +39 0432 848997 www.calzavara.i t [email protected] - Catalogue 2004 - page 162
ANTENNA MOUNTS
art. TAAR 32.. 3m T-arm antenna mounts with pivoting arm
These T-arm mounts with a usable width of 3.0 m are able to
support up to 3 panel antennas fixed on special pipe mounts
(art. PMAR .) at any point along the horizontal support member,
which is in 80 mm square section tube. This member is divided into
three sections, the two outer sections pivot horizontally, in orderto help antenna installation and maintenance. All the mechanical
adjustment components are in bronze and stainless steel.
The T-arm mount, in hot-dip galvanized steel, is anchored to the
main structure (tower, pole, etc) by means of two universal
brackets for 89-114 mm pipes.
SITETOOLS Radio Station Accessories
art. TAPM .... antenna pipe mount with fixing clamp for T-arm antenna mountThese are pipe mounts in hot-dip galvanized steel, of different
diameters and lengths, equipped for mounting antennas along the
horizontal support members of T-arm mounts (art. TAAR .).
Using the special fixing clamps, they can be positioned at any
point along the square section horizontal support member.
Alllegalrightsinthisdocum
entaretheexclusivepropertyofcalzavaraandnopartofitmayb
ereproducedorcommunicatedtoanyotherpartywithoutourau
thorization.
Alldatainthiscatalogueisforreferenceonlyandma
ybechangedwithoutnotice,
inlinewithourpolicyofcontinuous
technicaldevelopment.
7/24/2019 Accessori Stazioni Radio[1]
9/28
calz
avar
a
calz
avar
a
calz
avara
calz
avara
calz
avara
calz
avara
calzav
ara
calzav
ara
calza
vara
calz
avar
a
calz
avara
calz
avara
calzav
ara
calza
vara
calza
vara
A Min.
A Max.
TAPA 7615
TAPA 7625
TAPA 7630
145
145
145
Antenna pipe dimensionsTAPA extensionArticle
mm
290
290
290
mm
76
76
76
mm
1500
2500
3000
mm
A Min. A Max. H - Height
PLAN VIEW
SUPPLY CONFIGURATION
INSTALLATION EXAMPLE
SUPPLY CONFIGURATION
A
60 mm
PLAN VIEW
SIDE VIEW
TAPB 6020
TAPB 7620
TAPB 8920
TAPB 1120
TAPB 1320
TAPB 1520
TAPB 1920
60
76
89
114
133
159
194
200
200
200
200
200
200
200
Article
mm mm
A
250mm
TAPB dimensions
SUPPLY CONFIGURATION
800mm
300 mm
SIDE VIEW
PLAN VIEW
89-219 mm
114 mm
TAMA 8915
TAMA 1521
89-159
159-219
Article
mm
Dimensions
calzavara - tel. +39 0432 84381 fax +39 0432 848997 www.calzavara.i t [email protected] - Catalogue 2004 - page 163
SITETOOLS Radio Station Accessories
ANTENNA MOUNTS
art. TAPA .... pipe mount with adjustable brackets
These brackets enable antenna pipe mounts to be fixed to T-arm
mounts type TAAR 5, allowing adjustment of the distance
between the centre line of the pipe mount itself and the T-arm
support member. In this way, different radiant systems can be
installed on the same T-arm, with optimum positioning of theantennas and adequate radioelectric decoupling, both
horizontally and vertically.
The brackets, in hot-dip galvanized steel, are supplied complete
with pipes in various lengths and with fixing hardware.
art. TAPB .... pipe bracket with tube for antenna fixing
This consists of a hot-dip galvanized pipe bracket, with a tube
welded to it.
It is used for fixing panel or omnidirectional antennas.
The item is supplied complete with fixing hardware.
art. TAMA .... universal pipe bracket for dish antennasHot-dip galvanized pipe with adjustable bracket, to be used for
fixing dish antennas up to 600 mm in diameter. This mount can be
installed on tubes with diameters between 89 mm and 219 mm.
The item is supplied complete with fixing hardware.
Alllegalrightsinthisdocum
entaretheexclusivepropertyofcalzavaraandnopartofitmayb
ereproducedorcommunicatedtoanyotherpartywithoutourau
thorization.
Alldatainthiscatalogueisforreferenceonlyandma
ybechangedwithoutnotice,
inlinewithourpolicyofcontinuous
technicaldevelopment.
7/24/2019 Accessori Stazioni Radio[1]
10/28
calz
avar
a
calz
avar
a
calz
avara
calz
avara
calz
avara
calz
avara
calzav
ara
calzav
ara
calza
vara
calz
avar
a
calz
avara
calz
avara
calzav
ara
calza
vara
calza
vara
H
PLAN VIEW INSTALLATION EXAMPLE
H - Height
mm mm
PMAR 6015
PMAR 6020
PMAR 6025
PMAR 6030
PMAR 7615
PMAR 7620
PMAR 7625
PMAR 7630
PMAR 8915
PMAR 8920
PMAR 8925
PMAR 8930
PMAR 1110
PMAR 1115
PMAR 1120
PMAR 1125
PMAR 1130
PMAR 1140
PMAR 1150
PMAR 1160
60
60
60
60
76
76
76
76
89
89
89
89114
114
114
114
114
114
114
114
1500
2000
2500
3000
1500
2000
2500
3000
1500
2000
2500
30001000
1500
2000
2500
3000
4000
5000
6000
Pipe mountArticle
SUPPLY CONFIGURATION
Type of antenna
HP12, EHP12
HP15, EHP15
HP20
HP24
HP30, EHP30, HPDB30
HP37, HPDB37
UHX6, HPX6
HP8, UHX8, HPX8
HP10, UHX10, HPX10
HP12, HMX12, HPX12
HP15, HPX15
PCRA 1200 CO
PCRA 1500 CO
PCRA 2000 CO
PCRA 2400 CO
PCRA 3000 CO
PCRA 3700 CO
PCRA 1800 AN
PCRA 2400 AN
PCRA 3000 AN
PCRA 3700 AN
PCRA 4600 AN
1.2
1.5
2.0
2.4
3.0
3.7
1.8
2.4
3.0
3.7
4.6
Antennadiameter
m
Article
Telesystem high
performance(HP)
extremely high
performance(EHP)
and high
performance dual
band (HPDB).
Andrew high
performance (HP)
and highperformance dual
polarized.
calzavara - tel. +39 0432 84381 fax +39 0432 848997 www.calzavara.i t [email protected] - Catalogue 2004 - page 164
art. PMAR .... antenna pipe mount
ANTENNA MOUNTS
Pipe mounts are of various diameters and lengths, in hot-dip
galvanized steel.
With the help of suitable fixing systems, they can be used in many
situations as antenna support systems.
art. PCRA .... radome
Radomes for dish antennas consist of a Hypalon plastic fabric
which is extremely durable and resistant to atmospheric agents.
The radomes by calzavara are suitable for use with the majority of
dish antennas in the market and with the most commonly found
models which are no longer in production.
Non standard products can be supplied to Customers' specific
requirements.
The supply includes all the necessary stainless steel installation
accessories, such as fixing anchors and spring tensioners.
SITETOOLS Radio Station Accessories
PROTECTION COMPONENTS FOR RADIANT SYSTEM
Alllegalrightsinthisdocum
entaretheexclusivepropertyofcalzavaraandnopartofitmayb
ereproducedorcommunicatedtoanyotherpartywithoutourau
thorization.
Alldatainthiscatalogueisforreferenceonlyandma
ybechangedwithoutnotice,
inlinewithourpolicyofcontinuous
technicaldevelopment.
7/24/2019 Accessori Stazioni Radio[1]
11/28
calz
avar
a
calz
avar
a
calz
avara
calz
avara
calz
avara
calz
avara
calzav
ara
calzav
ara
calza
vara
calz
avar
a
calz
avara
calz
avara
calzav
ara
calza
vara
calza
vara
PLAN VIEW
INSTALLATION EXAMPLE
INSTALLATION EXAMPLE
SIDE VIEW
WBAR 6648 SF
WBAR 1048 SF
WBAR 1548 SF
WBAR 2048 SF
WBAR 2548 SF
WBAR 2560 SF
WBAR 3060 SF
660
1000
1500
2000
2500
2500
3000
48
48
48
48
48
60
60
27
27
27
27
27
27
27
Windbrace dimensions Allowableaxial load
L - Length
mm mm KN
L
M16 bolt
Article
PLAN VIEW
SIDE VIEW
WBAR 6448 TT
WBAR 8448 TT
WBAR 1148 TT
WBAR 1648 TT
WBAR 2148 TT
WBAR 2660 TT
WBAR 2676 TT
WBAR 3176 TT
48
48
48
48
48
60
76
76
60
60
60
60
60
76
89
89
mm mm
640
840
1180
1680
2180
2680
2680
3180
mm mm KN
Min. Max.a b
980
1180
1520
2020
2520
3020
3020
5020
19
19
19
19
19
19
27
22
L - Lengthfor installation
Windbracediameters
Allowableaxial load
L Min.
L Max.
M16 bolt
ba
Article
M16 bolt
calzavara - tel. +39 0432 84381 fax +39 0432 848997 www.calzavara.i t [email protected] - Catalogue 2004 - page 165
SITETOOLS Radio Station Accessories
art. WBAR .... SF single flange windbrace
WINDBRACES
Single flange windbraces consist of tubes of various diameters and
lengths, with a flange at one end for fixing to the antenna mount.
They may be partially or totally fixed using a pipe adapter kit or
pipe bracket (art. PBAK . - PBTH .).
The item is supplied complete with fixing hardware.
art. WBAR.... TT twin flange telescopic windbrace
Twin flange telescopic windbraces consist of two tubes of different
diameters and lengths, one inside the other, in order to provideincreased stiffness with telescopic extension.
Once the exact length of the windbrace has been determined, it is
locked by means of an intermediate collar which, when tightened,
prevents sliding of the tubes. These windbraces, in hot-dip
galvanized steel, have a flange at each end for fixing to antenna
support structures.
They may be partially or totally fixed using single, double or twist
brackets (art. PBSF . FS/FT - PBRF .).
The item is supplied complete with fixing hardware.
Alllegalrightsinthisdocum
entaretheexclusivepropertyofcalzavaraandnopartofitmayb
ereproducedorcommunicatedtoanyotherpartywithoutourau
thorization.
Alldatainthiscatalogueisforreferenceonlyandma
ybechangedwithoutnotice,
inlinewithourpolicyofcontinuous
technicaldevelopment.
7/24/2019 Accessori Stazioni Radio[1]
12/28
calz
avar
a
calz
avar
a
calz
avara
calz
avara
calz
avara
calz
avara
calzav
ara
calzav
ara
calza
vara
calz
avar
a
calz
avara
calz
avara
calzav
ara
calza
vara
calza
vara
INSTALLATION EXAMPLES
INSTALLATION EXAMPLE
INSTALLATION EXAMPLE
PLAN VIEW
FRONT VIEW
PBSF 7600 FS
PBSF 8900 FS
PBSF 1100 FS
PBSF 7690 FS
PBSF 8990 FS
PBSF 1190 FS
76
89
114
76
89
114
Pipe diameter Flange angle
mm
0
0
0
90
90
90
degree
hole 17.5 mmfor M16 bolts
0
90
100mm
100
mm
art. PBSF ..00 FS
Article
Pipe diameter
Article
PBSF 7610 FT
PBSF 8910 FT
PBSF 1110 FT
76
89
114
mm
hole 17.5 mm
for M16 bolts
PLAN VIEW
FRONT VIEW
art. PBSF ..90 FS
PBRF 1235
PBRF 1635
M12x35
M16x35
Rotation boltArticleFRONT VIEW
PLAN VIEW
calzavara - tel. +39 0432 84381 fax +39 0432 848997 www.calzavara.i t [email protected] - Catalogue 2004 - page 166
SITETOOLS Radio Station Accessories
PIPE BRACKETS & ATTACHMENTS
This bracket, in hot-dip galvanized steel, has a flange with a single
hole at one end, which allows a windbrace to be secured to tubes
and pipe mounts.
Connection to the windbrace is achieved by bolting the windbrace
flange to the bracket flange, while fixing to the tube is ensured by
clamping the bracket.
The item is supplied complete with fixing hardware.
art. PBSF .... FS pipe bracket with single hole flange
This bracket, in hot-dip galvanized steel, has a flange with three
holes at one end, which allows up to three windbraces to be
secured to tubes and pipe mounts. Connection to the windbraces
is achieved by bolting the windbrace flanges to the bracket flange,
while fixing to the tube is ensured by clamping the bracket.
The item is supplied complete with fixing hardware.
art. PBSF .... FT pipe bracket with three hole flange
art. PBRF .... twin lug rotating flange
This flange comprises two parallel lugs and is used for securing the
ends of windbraces, by means of bolts. This accessory, which is
bolted at the base, allows the windbrace to rotate in two planes, at
right angles to each other. Orientation of the windbrace in any
position is therefore possible. The accessory is made entirely of hot-dip galvanized steel and is supplied complete with fixing hardware.
Alllegalrightsinthisdocum
entaretheexclusivepropertyofcalzavaraandnopartofitmayb
ereproducedorcommunicatedtoanyotherpartywithoutourau
thorization.
Alldatainthiscatalogueisforreferenceonlyandma
ybechangedwithoutnotice,
inlinewithourpolicyofcontinuous
technicaldevelopment.
7/24/2019 Accessori Stazioni Radio[1]
13/28
calz
avar
a
calz
avar
a
calz
avara
calz
avara
calz
avara
calz
avara
calzav
ara
calzav
ara
calza
vara
calz
avar
a
calz
avara
calz
avara
calzav
ara
calza
vara
calza
vara
INSTALLATION EXAMPLE
INSTALLATION EXAMPLE
PLAN VIEW
SIDE VIEW
PLAN VIEW
SIDE VIEW
PBTH 1148
PBTH 1160
PBTH 1176
PBTH 1189
PBTH 8948
PBTH 8960
PBTH 8976
PBTH 8989
PBTH 7648
PBTH 7660
PBTH 7676
PBTH 6048
PBTH 6060
114
114
114
114
89
89
89
89
76
76
76
60
60
Pipe diameters
mm
48
60
76
89
48
60
76
89
48
60
76
48
60
mm b
100mm
100mm
a b
Article
PBAK 6048
PBAK 6060
PBAK 6076
PBAK 7648
PBAK 7660
PBAK 7676
PBAK 8948
PBAK 8960
PBAK 8976
PBAK 1148PBAK 1160
PBAK 1176
PBAK 1189
60
60
60
76
76
76
89
89
89
114114
114
114
Pipe diameters
mm
48
60
76
48
60
76
48
60
76
4860
76
89
mm
a b
Article
a
b
a
a
b
calzavara - tel. +39 0432 84381 fax +39 0432 848997 www.calzavara.i t [email protected] - Catalogue 2004 - page 167
PIPE BRACKETS & ATTACHMENTS
SITETOOLS Radio Station Accessories
art. PBTH .... twin right-angled pipe brackets
Made in hot-dip galvanized steel, these consist of two pipe
brackets, having the same or different diameters, joined at right-
angles to each other. This accessory allows tubes or windbraces of
different diameters to be fixed at right angles.
The item is supplied complete with fixing hardware.
art. PBAK .... 90 pipe adapter kits
These pipe adapter kits enable a single pipe of one diameter to be
joined at 90 to a pipe of another diameter. Each kit consists of
two clamp plates and two U-bolt assemblies to fit both pipe sizes.
This universal-style clamp fits pipes from 48 to 114 mm.
Made in hot-dip galvanized steel.
The item is supplied complete with fixing hardware.
Alllegalrightsinthisdocum
entaretheexclusivepropertyofcalzavaraandnopartofitmayb
ereproducedorcommunicatedtoanyotherpartywithoutourau
thorization.
Alldatainthiscatalogueisforreferenceonlyandma
ybechangedwithoutnotice,
inlinewithourpolicyofcontinuous
technicaldevelopment.
7/24/2019 Accessori Stazioni Radio[1]
14/28
calz
avar
a
calz
avar
a
calz
avara
calz
avara
calz
avara
calz
avara
calzav
ara
calzav
ara
calza
vara
calz
avar
a
calz
avara
calz
avara
calzav
ara
calza
vara
calza
vara
INSTALLATION EXAMPLE
INSTALLATION EXAMPLE
A
PLAN VIEW
PLAN VIEW
SIDE VIEW PBWM 1125 ..
PBWM 1140 ..
PBWM 8925 ..
PBWM 8940 ..
PBWM 7620 ..
PBWM 6020 ..
114
114
89
89
76
60
250
400
250
400
200
200
5.4
3.6
5.4
3.6
6.4
6.4
5.4
3.6
5.4
3.6
6.4
6.4
28
28
28
28
28
28
PBWM....ME/HCdimensions
Maximum load for fixingto concrete Rck 25 N/mm2
Maximum load for fixingto concrete Rck 25 N/mm2
mm mm kN kN
A V HL
kN
HT
M12
V
HL
HL
HT
120mm
S
100mm
100mm
120mm
120mm
120mm
A
SIDE VIEW
HT
V
Article
PBWM 1140 WP
PBWM 1125 WP
PBWM 8940 WP
PBWM 8925 WP
PBWM 7620 WP
PBWM 6020 WP
114
114
8989
76
60
400
250
400250
200
200
200
200
200200
200
200
3.6
5.4
3.6
5.4
6.4
6.4
3.6
5.4
3.6
5.4
6.4
6.4
28
28
28
28
28
28
PBWM....WP dimensions
mm mm mm KN KN
A V HL
KN
HTS Max.
150
150
150150
150
150
mm
S Min.
threaded rod M12x250
Article
calzavara - tel. +39 0432 84381 fax +39 0432 848997 www.calzavara.i t [email protected] - Catalogue 2004 - page 168
SITETOOLS Radio Station Accessories
PIPE BRACKETS & ATTACHMENTS
art. PBWM .... ME/CH wall mounting pipe bracket
This consists of a bracket, suitable for fixing tubes of different
diameters, connected by means of a square section tube to a plate
for wall mounting, using special fixing systems. This accessory,
which is made in hot-dip galvanized steel, is particularly suitable
for installation on buildings. The item is supplied complete withhardware and masonry fixing systems, comprising:
mechanical anchoring by means of expansion bolts for fixing to
concrete
chemical anchoring for fixing to walls made of brick or other
building materials.
How to order
Please specify the type of fixing system required by adding one of
the following codes to the article: ME (mechanical anchoring) or
CH (chemical anchoring).
art. PBWM .... WP wall mounting pipe bracket with back-plate
This consists of a bracket, suitable for fixing tubes of different
diameters, connected by means of a square section tube to a plate
and a back-plate assembly, which allows the bracket to be fixed to
thin walls without using special fixings.
The item is supplied complete with fixing hardware.
Alllegalrightsinthisdocum
entaretheexclusivepropertyofcalzavaraandnopartofitmayb
ereproducedorcommunicatedtoanyotherpartywithoutourau
thorization.
Alldatainthiscatalogueisforreferenceonlyandma
ybechangedwithoutnotice,
inlinewithourpolicyofcontinuous
technicaldevelopment.
7/24/2019 Accessori Stazioni Radio[1]
15/28
calz
avar
a
calz
avar
a
calz
avara
calz
avara
calz
avara
calz
avara
calzav
ara
calzav
ara
calza
vara
calz
avar
a
calz
avara
calz
avara
calzav
ara
calza
vara
calza
vara
PLAN VIEW
SIDE VIEW100mm
A
B
INSTALLATION EXAMPLE
PBWT 1180 ..
PBWT 1112 ..
PBWT 8980 ..
PBWT 8912 ..
114
114
89
89
800
1200
800
1200
800
1200
800
1200
5.8
4.0
5.8
4.0
57.0
57.0
57.0
57.0
28.5
28.5
28.5
28.5
Dimensions Maximum load for fixingto concrete Rck 25 N/mm2
Article
mm mm mm kN kN
A B V HL
kN
HT
M12V
HL
HT
mm mm mm
a
b
PLAN VIEW
FRONT VIEW
100mm
i
INSTALLATION EXAMPLE
a b
Article
PBTP 8924
PBTP 8925
PBTP 8926
PBTP 1126
PBTP 1127
PBTP 1128
PBTP 1130
PBTP1528
PBTP1530
PBTP 1531
PBTP 1532
PBTP 1930
PBTP 1931
PBTP1932
PBTP 1934
89
89
89
114
114
114
114
159
159
159
159194
194
194
194
PBTP dimensions
60
76
89
60
76
89
114
60
76
89
11460
76
89
114
247
259
269
262
275
284
300
288
300
310
325307
319
328
344
i
calzavara - tel. +39 0432 84381 fax +39 0432 848997 www.calzavara.i t [email protected] - Catalogue 2004 - page 169
SITETOOLS Radio Station Accessories
art. PBWT .... ME/CH twin triangular pipe brackets for wall mounting
PIPE BRACKETS & ATTACHMENTS
These consist of a pair of triangular shaped mounts in hot-dip
galvanized steel, with a pipe bracket at one corner and flanges for
wall mounting using special fixings at the other two corners.
The item is particularly suitable for mounting on walls with
projecting sections. The item is supplied complete with hardwareand masonry fixing systems, comprising:
mechanical anchoring by means of expansion bolts for fixing to
concrete
chemical anchoring for fixing to walls made of brick or other
building materials.
How to order
Please specify the type of fixing system required by adding one of
the following codes to the article: ME (mechanical anchoring) or
CH (chemical anchoring).
art. PBTP .... twin parallel pipe brackets
Made in hot-dip galvanized steel, these consist of two pipe
brackets, with the same or different diameters, joined in parallel to
each other. This accessory allows parallel fixing of tubes of
different diameters.
The item is supplied complete with fixing hardware.
Alllegalrightsinthisdocum
entaretheexclusivepropertyofcalzavaraandnopartofitmayb
ereproducedorcommunicatedtoanyotherpartywithoutourau
thorization.
Alldatainthiscatalogueisforreferenceonlyandma
ybechangedwithoutnotice,
inlinewithourpolicyofcontinuous
technicaldevelopment.
7/24/2019 Accessori Stazioni Radio[1]
16/28
calz
avar
a
calz
avar
a
calz
avara
calz
avara
calz
avara
calz
avara
calzav
ara
calzav
ara
calza
vara
calz
avar
a
calz
avara
calz
avara
calzav
ara
calza
vara
calza
vara
INSTALLATION EXAMPLE
PLAN VIEW
FRONT VIEW
FFPB 6015
FFPB 7615
FFPB 8915
FFPB 1115
FFPB 1315
FFPB 1415
FFPB 1515
FFPB 1915
FFPB 6025
FFPB 7625
FFPB 8925
FFPB 1125
FFPB 1325
FFPB 1425
FFPB 1525
FFPB 1925
60
76
89
114
133
140
159
194
60
76
89
114
133
140
159
194
150
150
150
150
150
150
150
150
250
250
250
250
250
250
250
250
FFPB dimensions
L
mm mm
rod 20 mm
L
CLAMP
R.F. CABLE
Article
INSTALLATION EXAMPLE
PLAN VIEW
SIDE VIEW
W
H
FFUB 3813
FFUB 4813
FFUB 5813
380
480
580
FFUB dimensions
Article
W - Width
mm
130
130
130
H
mm
rod 20 mm
calzavara - tel. +39 0432 84381 fax +39 0432 848997 www.calzavara.i t [email protected] - Catalogue 2004 - page 170
art. FFPB .... pipe bracket with pin for cable & feeder clamp installation
MODULAR SUPPORTING DEVICES
A pipe bracket, suitable for fixing onto tubes of different
diameters, comprising a pin fitted at right angles which can be
used to hold one or more clamps for feeders and service cables.
This item, which is in hot-dip galvanized steel, is suitable for
installation on pipe mounts and tubular section structures.It is supplied complete with fixing hardware for various pipe
diameters and with two lengths of clamp fixing pin: 150 mm and
250 mm.
art. FFUB .... U bracket for wall installation of cable & feeder clamps
A U bracket in galvanized steel, made of 20 mm rod, suitable
for supporting one or more clamps for service, R.F and wave guide
cables.
The item is supplied complete with hardware and masonry fixing
systems.
SITETOOLS Radio Station Accessories
Alllegalrightsinthisdocum
entaretheexclusivepropertyofcalzavaraandnopartofitmayb
ereproducedorcommunicatedtoanyotherpartywithoutourau
thorization.
Alldatainthiscatalogueisforreferenceonlyandma
ybechangedwithoutnotice,
inlinewithourpolicyofcontinuous
technicaldevelopment.
7/24/2019 Accessori Stazioni Radio[1]
17/28
calz
avar
a
calz
avar
a
calz
avara
calz
avara
calz
avara
calz
avara
calzav
ara
calzav
ara
calza
vara
calz
avar
a
calz
avara
calz
avara
calzav
ara
calza
vara
calza
vara
SUPPLY CONFIGURATION
SUPPLY CONFIGURATION
GRBA 3150
GRBA 1950
GRBA 3225
GRBB 1360
art. GRBB ....
art. GRBA ....
310
190
320
130
Busbar MaterialArticle
L - Length
mm
50
50
25
60
H - Height
mm
copper
copper
galvanized copper
galvanized steel
-
12
7
13
5 + 1
holes
n
LH
galvanized steel plate with 5 holes
for attachment to tower/pole
20x40 mm slot
holes 10 mm
holes 11.5 mm
calzavara - tel. +39 0432 84381 fax +39 0432 848997 www.calzavara.i t [email protected] - Catalogue 2004 - page 171
art. GRPI grounding kit
The kit is designed to dissipate to ground the electrical discharge
picked up by the lightning protection system.
It connects directly to the base of the structure and consists of a
buried ring of copper conductor and grounding rods, surrounding
the foundations.It comprises:
5 zinc or copper plated grounding rods, length 1500 mm
copper conductor for connecting the base of the pole to
the grounding rods with cross sectional area of 50 mm2, at
least, 40 m long
copper bus-bar
insulators, clamps and miscellaneous system accessories in
non-ferrous metal
assembly instructions
packing.
The grounding effect can be amplified by increasing the number of
grounding rods, to be ordered separately (art. GRPI 1500 GR50).
The item can be supplied with various sections and lengths, at the
specific request of the Customer.
art. GRB. .... busbar
Copper busbars provide centralized grounding lug connections
for multiple trasmission lines.
GROUNDING PROTECTION
SITETOOLS Radio Station Accessories
Alllegalrightsinthisdocum
entaretheexclusivepropertyofcalzavaraandnopartofitmayb
ereproducedorcommunicatedtoanyotherpartywithoutourau
thorization.
Alldatainthiscatalogueisforreferenceonlyandma
ybechangedwithoutnotice,
inlinewithourpolicyofcontinuous
technicaldevelopment.
7/24/2019 Accessori Stazioni Radio[1]
18/28
calz
avar
a
calz
avar
a
calz
avara
calz
avara
calz
avara
calz
avara
calzav
ara
calzav
ara
calza
vara
calz
avar
a
calz
avara
calz
avara
calzav
ara
calza
vara
calza
vara
HBAI 3030
HBAI 3040
HBAI 4030
HBAI 4040
HBAI 5030
HBAI 5040
300
300
400
400
500
500
3000
4000
3000
4000
3000
4000
Cable ladder dimensions
W - Width L - Length
mm mm
500 mmSIDE VIEW
INSTALLATION EXAMPLE
rod 20mm
L W
Article
INSTALLATION EXAMPLE
HBRL 3090
HBRL 4090
HBRL 5090
300
400
500
830
930
1030
Dimensions
W - Width
mm
L - Length
mm
PLAN VIEW
W
L
Article
INSTALLATION EXAMPLE
PLAN VIEW
SIDE VIEW
L
art. HBJL 3123
HBJL 3123
HBJL 4160
HBJL 5200
123
160
200
3
4
5
HBJL dimensions
L - Length Holesmm n
Article
calzavara - tel. +39 0432 84381 fax +39 0432 848997 www.calzavara.i t [email protected] - Catalogue 2004 - page 172
SITETOOLS Radio Station Accessories
HORIZONTAL CABLE BRIDGES
art. HBAI .... horizontal cable ladder
A cable support ladder in hot-dip galvanized steel section, in
widths from 300 to 500 mm and in 3.0 and 4.0 m lengths. This
modular ladder can be easily adapted on site to provide the exact
run length required. The rungs, in 20 mm diameter rod, ensure
easy and secure fixing of feeders and cables by means of eithercable clips or clamps.
The supply does not include intermediate supports and end
fixings (art. HBJL . / HBJB).
art. HBRL .... cable ladder - 90curve
A ladder end piece which, when connected to the straight section
(art. HBAI .), allows a 90 change in direction. Made in hot-dip
galvanized steel, it is available in widths compatible with the
straight ladder sections.
The rungs, in 20 mm diameter rod, ensure easy and secure fixing
of feeders and cables by means of either cable clips or clamps.
The supply does not include intermediate supports and endfixings (art. HBJL ./HBJB).
art. HBJL .... cable ladder - plate joint
This item consisting of a pair of hot-dip galvanized sheet metal
plates, allows cable ladders (art. HBAI ....) to be joined in a
number of different ways.
The item is supplied complete with fixing hardware.
Alllegalrightsinthisdocum
entaretheexclusivepropertyofcalzavaraandnopartofitmayb
ereproducedorcommunicatedtoanyotherpartywithoutourau
thorization.
Alldatainthiscatalogueisforreferenceonlyandma
ybechangedwithoutnotice,
inlinewithourpolicyofcontinuous
technicaldevelopment.
7/24/2019 Accessori Stazioni Radio[1]
19/28
calz
avar
a
calz
avar
a
calz
avara
calz
avara
calz
avara
calz
avara
calzav
ara
calzav
ara
calza
vara
calz
avar
a
calz
avara
calz
avara
calzav
ara
calza
vara
calza
vara
INSTALLATION EXAMPLE
INSTALLATION EXAMPLE
PLAN VIEW
W
max = 90
HBEL 3000
HBEL 4000
HBEL 5000
300
400
500
Dimensions
W - Width
mm
Article
PLAN VIEW
FRONT VIEW
100 mm
INSTALLATION EXAMPLE
100mm
160mm
PLAN VIEW
FRONT VIEW
INSTALLATION EXAMPLE PLAN VIEW
FRONT VIEW
160mm
100mm
calzavara - tel. +39 0432 84381 fax +39 0432 848997 www.calzavara.i t [email protected] - Catalogue 2004 - page 173
SITETOOLS Radio Station Accessories
HORIZONTAL CABLE BRIDGES
art. HBEL .... cable ladder - adjustable curve end piece
A pair of end pieces in hot-dip galvanized steel which, when
secured to the drillings in two adjacent straight ladder modules
(art. HBAI ....) or to the 90 ladder end piece (art. HBRL ....), allow
the horizontal direction to be modified.
This item can be used on several sections in order to adapt thewhole of the overhead run between the antenna supporting
structure and the equipment housing.
The supply does not include intermediate supports and end
fixings (art. HBJR ./HBJB).
art. HBJB cable ladder - 90 angle joint
This item consisting of a pair of brackets in hot-dip galvanizedsteel, allows the end sections of cable ladders (art. HBAI .) to
be fixed to the ground or a wall.
The item is supplied complete with hardware and masonry
fixing systems.
art. HBRF cable ladder - fitting for roof installation
This item consisting of 2 L-shaped brackets in hot-dip galvanizedsteel, allows ladder modules (art. HBAI .) to be secured to
horizontal masonry work such as roofs and terraces.
The ladder attachment holes are elongated to allow adjustment of
its horizontal position in order to compensate for any sloping of
the roof or terrace.
The item is supplied complete with hardware and masonry
fixing systems.
art. HBWF cable ladder - fitting for wall installation
This item, which consists of 2 L-shaped brackets in hot-dip
galvanized steel, allows ladder modules (art. HBAI .) to be
secured to vertical walls.
The item is supplied complete with hardware and masonry
fixing systems.
Alllegalrightsinthisdocum
entaretheexclusivepropertyofcalzavaraandnopartofitmayb
ereproducedorcommunicatedtoanyotherpartywithoutourau
thorization.
Alldatainthiscatalogueisforreferenceonlyandma
ybechangedwithoutnotice,
inlinewithourpolicyofcontinuous
technicaldevelopment.
7/24/2019 Accessori Stazioni Radio[1]
20/28
calz
avar
a
calz
avar
a
calz
avara
calz
avara
calz
avara
calz
avara
calzav
ara
calzav
ara
calza
vara
calz
avar
a
calz
avara
calz
avara
calzav
ara
calza
vara
calza
vara
art. HBWA .... ME/CH
SIDE VIEW
PLAN VIEW
MF
2/3 L
L
HBWA 7925 ..
HBWA 6410 ..
735
585
250
100
3
3
Dimensions
Maximum load
L - Length M F
mm mm kN
Article
INSTALLATION EXAMPLE
Article
HBSC 3000
HBSC 4000
HBSC 5000
300
400
500
Dimensions
W - Width
mm
1000 mm
W
SIDE VIEW PLAN VIEW
200 mm
INSTALLATION EXAMPLE
Article
PLAN VIEW
SIDE VIEW
A
200mm
HBRC 3090
HBRC 4090
HBRC 5090
300
400
500
Dimensions
A
mm
calzavara - tel. +39 0432 84381 fax +39 0432 848997 www.calzavara.i t [email protected] - Catalogue 2004 - page 174
SITETOOLS Radio Station Accessories
HORIZONTAL CABLE BRIDGES
art. HBWA .... ME/CH cable ladder - wall bracket
These brackets in hot-dip galvanized steel, are for supporting
300/400 mm wide cable ladder modules (art. HBAI .) on walls. The
distance between two brackets must not be greater than 4.0 m. This
accessory is designed to leave a free space M to allow for passage of
any existing cable ducting and/or guttering. The item is suppliedcomplete with hardware and masonry fixing systems, comprising:
mechanical anchoring by means of expansion bolts for fixing to
concrete
chemical anchoring for fixing to walls made of brick or other
building materials.
How to order
Please specify the type of fixing system required by adding one of
the following codes to the item:
ME (mechanical anchoring) or CH (chemical anchoring).
art. HBRC .... cable ladder - sheet metal protective cover
A protective cover in folded, hot-dip galvanized sheet metal, which
is used on the 90 ladder end piece (art. HBRL .). It protects
feeders and service cables against damage from loads and from
snow falls and ice. On request, the outer surface can be painted,
at the factory, in RAL colours.
The supply includes hardware for fixing to the ladder.
art. HBSC .... cable ladder - sheet metal protective cover
Protective covers in folded, hot-dip galvanized sheet metal.
This item is used on horizontal cable ladders (art. HBAI .), to
protect feeders and service cables against damage from loads and
from snow falls and ice. On request, the outer surface can be
painted, at the factory, in RAL colours.
The supply includes hardware for fixing to the ladder.
Alllegalrightsinthisdocum
entaretheexclusivepropertyofcalzavaraandnopartofitmayb
ereproducedorcommunicatedtoanyotherpartywithoutourau
thorization.
Alldatainthiscatalogueisforreferenceonlyandma
ybechangedwithoutnotice,
inlinewithourpolicyofcontinuous
technicaldevelopment.
7/24/2019 Accessori Stazioni Radio[1]
21/28
calz
avar
a
calz
avar
a
calz
avara
calz
avara
calz
avara
calz
avara
calzav
ara
calzav
ara
calza
vara
calz
avar
a
calz
avara
calz
avara
calzav
ara
calza
vara
calza
vara
SUPPLY CONFIGURATION
SUPPLY CONFIGURATION
HBGF 3040
HBGF 5060
300-400
500-600
600
800
Dimensions
Supportableladders
Article
W - Width Widths
mm mm
INSTALLATION EXAMPLE
SIDE VIEW
max span length 4 m
W
4000mm
horizontal cablebridge
400 mm
1000 mm
200 mm
200mm
PLAN VIEW
PLAN VIEW
400 mm
200mm
10mm
FRONT VIEW
SIDE VIEW
FRONT VIEW
calzavara - tel. +39 0432 84381 fax +39 0432 848997 www.calzavara.i t [email protected] - Catalogue 2004 - page 175
art. ASBB ballast blocks
These are 20 x 20 x 40 cm concrete blocks, weighing approximately
38 kg each. They are used as supports for cable bridges and for
ballasting self-stabilising supports.
art. ASRM rubber mat
The rubber mat forms a protective layer between the frame and
the surface of the roof, to prevent damage to roof waterproofing.
These rubber mats are positioned under the ballast blocks;
suitable for external use.
art. HBGF .... cable ladder - ground supporting frame
HORIZONTAL CABLE BRIDGES
BALLAST COMPONENTS
These frames, in hot-dip galvanized steel section, are designed to
support horizontal cable ladder sections (art. HBAI .) when the
distance between the antenna supporting structure and the
equipment housing is greater than 4.0 m. The sliding supports
also allow the cable ladder to be supported at varying heights.The item is supplied complete with hardware and masonry
fixing systems.
SITETOOLS Radio Station Accessories
Alllegalrightsinthisdocum
entaretheexclusivepropertyofcalzavaraandnopartofitmayb
ereproducedorcommunicatedtoanyotherpartywithoutourau
thorization.
Alldatainthiscatalogueisforreferenceonlyandma
ybechangedwithoutnotice,
inlinewithourpolicyofcontinuous
technicaldevelopment.
7/24/2019 Accessori Stazioni Radio[1]
22/28
calz
avar
a
calz
avar
a
calz
avara
calz
avara
calz
avara
calz
avara
calzav
ara
calzav
ara
calza
vara
calz
avar
a
calz
avara
calz
avara
calzav
ara
calza
vara
calza
vara
URPI 0300
URPI 0600
URPI 1200
URPI 2400
URPI 3600
URPI 6000
URPI 1500 SP
300
600
1200
2400
3600
60001500
Dimensions
H - Height
mm
Safety climb ladder
Safety climb ladder
Safety climb ladder
Safety climb ladder
Safety climb ladder
Safety climb ladderSafety climb rail
DescriptionH
1500mm
max.
1800mm
300mm
20
INSTALLATION EXAMPLE FRONT VIEW
Article
L - Length
SLFF 2711 TT
SLFF 2715 TT
SLFF 2719 TT
114
159
194
mm
PLAN VIEW
SUPPLY CONFIGURATION
SIDE VIEW
Pipe diameter
270
270
270
mm
Min.
400
400
400
mm
Max.
L - LengthArticle
art. URPI 1500 SP
420 mm
INSTALLATION EXAMPLE
SLTC 7600
SLTC 8900
SLTC 1140
SLTC 1330
SLTC 1400
SLTC 1590
SLTC 1680
SLTC 1940
76
89
114
133
140
159
168
194
mm
PLAN VIEW
FRONT VIEW
100mm
Pipe diameterArticle
calzavara - tel. +39 0432 84381 fax +39 0432 848997 www.calzavara.i t [email protected] - Catalogue 2004 - page 176
SITETOOLS Radio Station Accessories
art. URPI .... climbing ladder with T rail safety climb system
CLIMBING LADDERS
Continuous run, uncaged climbing ladder with T rail (50x6 mm)
safety climb system. The rungs are opposite each other.
All materials are in hot-dip galvanized steel.
The rigid anchor line (T rail 50x6 mm) is designed according to
UNI EN 353 part. 1.
art. SLFF .... TT telescopic bracket for fixing a T rail safety climb ladder
This is a telescopic bracket in hot-dip galvanized steel for fixing a
T rail safety climb ladder to pipes of different diameters.
The telescopic length adjustment system allows the ladder to be
fitted on pipes with flanged tubes having different diameters at
bottom and top. This accessory must be installed with a maximum
spacing of 1800 mm between brackets.
The item is supplied complete with fixing hardware.
art. SLTC .... pipe bracket universal mount
This pipe bracket has a U shaped fixing, drilled for insertion of the
bolt and a twist bracket. All materials are in hot-dip galvanized steel.
This item, used in conjunction with art. SLFF ...., enables a
climbing ladder to be anchored to a support pipe.
Alllegalrightsinthisdocum
entaretheexclusivepropertyofcalzavaraandnopartofitmayb
ereproducedorcommunicatedtoanyotherpartywithoutourau
thorization.
Alldatainthiscatalogueisforreferenceonlyandma
ybechangedwithoutnotice,
inlinewithourpolicyofcontinuous
technicaldevelopment.
7/24/2019 Accessori Stazioni Radio[1]
23/28
calz
avar
a
calz
avar
a
calz
avara
calz
avara
calz
avara
calz
avara
calzav
ara
calzav
ara
calza
vara
calz
avar
a
calz
avara
calz
avara
calzav
ara
calza
vara
calza
vara
255 mm
PLAN VIEW
FRONT VIEW
SLFF 0255
SLFF 0228
Bracket
255
228
mm
L - Length
Article
INSTALLATION EXAMPLE
INSTALLATION EXAMPLE
FRONT VIEW
500 mm
2000mm
TOP END-STOP BOTTOM END-STOP
RIGID END-STOP
SLTR 1000
SLTR 1001
SLTR 1002
rigid end-stop
top end-stop
bottom end-stop
DescriptionArticle
INSTALLATION EXAMPLE
SIDE VIEWFRONT VIEW
PLAN VIEW
314 mm
300mm
calzavara - tel. +39 0432 84381 fax +39 0432 848997 www.calzavara.i t [email protected] - Catalogue 2004 - page 177
SITETOOLS Radio Station Accessories
CLIMBING LADDERS
art. SLFF .... fixing fitting for climbing ladder with safety climb system
This is a bracket in hot-dip galvanized steel which, when used with
pipe bracket universal mount (art. SLTC .), enables T rail safety
climb ladder modules to be anchored to pipes and tubes of
various diameters. This item must be installed with a maximum
spacing of 1800 mm between brackets.The item is supplied with fixing hardware.
art. AUPI 3050 cover for climbing ladder with safety climb system
Anti-climb protection for T rail safety climb ladder, by means of
a shaped, galvanized, sheet steel cover.
art. SLTR .... tilting stops for T rail safety climb system
These components, in hot-dip galvanized steel, are designed to
act as limit stops for the safety climb system slider.
The stops can be installed at the top and bottom ends of the
ladder and can also be disabled by deliberate action of the
operator, by simply tilting them.
art. SLRS 3030 footrest for climbing ladder with T rail safety climb system
Tiltable footrest in hot-dip galvanized steel grating. The supply
includes hot-dip galvanized nuts and bolts.
Alllegalrightsinthisdocum
entaretheexclusivepropertyofcalzavaraandnopartofitmayb
ereproducedorcommunicatedtoanyotherpartywithoutourau
thorization.
Alldatainthiscatalogueisforreferenceonlyandma
ybechangedwithoutnotice,
inlinewithourpolicyofcontinuous
technicaldevelopment.
7/24/2019 Accessori Stazioni Radio[1]
24/28
calz
avar
a
calz
avar
a
calz
avara
calz
avara
calz
avara
calz
avara
calzav
ara
calzav
ara
calza
vara
calz
avar
a
calz
avara
calz
avara
calzav
ara
calza
vara
calza
vara
FULL BODY HARNESS
SAFETY CLIMB DEVICEWITH SHOCK ABSORBER
INSTALLATION EXAMPLE
INSTALLATION EXAMPLE
SUPPLY CONFIGURATION
min.
1100mm
max1500mm4
00mm
500mm
1200mm
3000mm
L profile 60 x 6 mm
calzavara - tel. +39 0432 84381 fax +39 0432 848997 www.calzavara.i t [email protected] - Catalogue 2004 - page 178
SITETOOLS Radio Station Accessories
CLIMBING LADDERS
art. SKPI safety climb kit
The kit (universal sizing) is in accordance with Euronorm
Standards and includes:
T rail safety climb device with detachable shock absorber
full body harness with two anchor points (back and chest).
WARNING: this safety climb kit is included in the standard supply
for continuous run climbing ladders (art. URPI).
art. SLCL 5050 connection fittings for T rail safety climb ladder modules
These consist of two plates in hot-dip galvanized steel, complete
with fixing hardware, used to connect safety climb ladder modules
to each other.
art. SLRT 0300 end reinforcement
This item is required, when the distance between last mounting
point and top-end of the ladder/rail exceeds 500 mm. It must be
bolted onto the guide-rail with bolts spaced at 400-500 mm
intervals and must extend down over at leats two mounting
brackets.The item is supplied complete with fixing hardware.
Alllegalrightsinthisdocum
entaretheexclusivepropertyofcalzavaraandnopartofitmayb
ereproducedorcommunicatedtoanyotherpartywithoutourau
thorization.
Alldatainthiscatalogueisforreferenceonlyandma
ybechangedwithoutnotice,
inlinewithourpolicyofcontinuous
technicaldevelopment.
7/24/2019 Accessori Stazioni Radio[1]
25/28
calz
avar
a
calz
avar
a
calz
avara
calz
avara
calz
avara
calz
avara
calzav
ara
calzav
ara
calza
vara
calz
avar
a
calz
avara
calz
avara
calzav
ara
calza
vara
calza
vara
H
Wi
We
SUPPLY CONFIGURATION
FRONT VIEW
inside
ground level
outside
PLAN VIEW
FEVG 3024
FEVG 3022
FEVG 3020
FEVG 2524
FEVG 2522
FEVG 2520
300
300
300
250
250
250
Internal WidthWi
External WidthWe H- Height
cm
340
340
340
290
290
290
cm
240
220
200
240
220
200
cm
Gate dimensions
30cm
Article
SUPPLY CONFIGURATION
WiWe
H
FRONT VIEW
FEPG 1322 ..
FEPG 1320 ..
FEPG 1318 ..
FEPG 1122 ..
FEPG 1120 ..
FEPG 1118 ..
130
130
130
110
110
110
Internal WidthWi H- Height
cm
160
160
160
140
140
140
External WidthWe
cm
220
200
180
220
200
180
cm
art. FEPG .... IL
inward right-hand
inside
outside
inside
outside
inside
outside
inside
outside
art. FEPG .... OL
outward left-hand
art. FEPG .... IR
inward right-hand
art. FEPG .... OR
outward right-hand
Gate dimensions
20cm
Article
calzavara - tel. +39 0432 84381 fax +39 0432 848997 www.calzavara.i t [email protected] - Catalogue 2004 - page 179
SITETOOLS Radio Station Accessories
art. FEVG .... vehicle access gate
FENCING
These gates are large enough to allow heavy truck access into the
delimited area.
They are made with a strong supporting frame in hot-dip galvanized,
tubular steel section and are fitted with a key operated lock.
The supply includes all the ancillary parts.
These gates allow pedestrian access to inside the delimited area.
They are made with a strong supporting frame in hot-dip
galvanized, tubular steel section and are fitted with a padlock.
They are produced in various configurations and sizes.
The supply includes all the necessary accessories.
How to order
Please specify the type of opening required by adding one of the
following codes to the gate article:
IR inward right-hand OR outward right-hand
IL inward left-hand OL outward left-hand
art. FEPG .... pedestrian access gate
Alllegalrightsinthisdocum
entaretheexclusivepropertyofcalzavaraandnopartofitmayb
ereproducedorcommunicatedtoanyotherpartywithoutourau
thorization.
Alldatainthiscatalogueisforreferenceonlyandma
ybechangedwithoutnotice,
inlinewithourpolicyofcontinuous
technicaldevelopment.
7/24/2019 Accessori Stazioni Radio[1]
26/28
calz
avar
a
calz
avar
a
calz
avara
calz
avara
calz
avara
calz
avara
calzav
ara
calzav
ara
calza
vara
calz
avar
a
calz
avara
calz
avara
calzav
ara
calza
vara
calza
vara
FEFP 2022
FEFP 2020
FEFP 2018
FEFP 1622
FEFP 1620
FEFP 1618
200
200
200
165
165
165
D Hp
cm
212
199
172
212
199
172
cm
Hf
220
205
180
220
205
180
cm
Panel height Fencing heightUpright centre distance
FEUL 2422
FEUL 2220
FEUL 2018
FEUP 2422
FEUP 2220
FEUP 2018
FEUT 2422
FEUT 2220
FEUT 2018
L
L
L
Plate
Plate
Plate
T
T
T
Hu
240
225
200
240
225
200
240
225
200
cm
Uprightheight
Uprightsection type
Hp
212
198
172
212
198
172
212
198
172
cm
Panel height
Hf
220
205
180
220
205
180
220
205
180
cm
Fencing height
FRONT VIEW
FRONT VIEW
Hp
Hf
H
f
H
p
D
Hu
approx.
10cm
Article
Article
H
FRONT VIEW
FEMD 1750
FEMD 2000
FEMS 1800
FEMS 2000
Diamond
Diamond
Square
Square
H - Height
175
200
180
200
cm
MeshMesh patternArticle
calzavara - tel. +39 0432 84381 fax +39 0432 848997 www.calzavara.i t [email protected] - Catalogue 2004 - page 180
SITETOOLS Radio Station Accessories
art. FEFP .... grating fencing panel
FENCING
These are hot-dip galvanized steel grating panels with a mesh s ize
of 63 x 132 mm, complete with surrounding frame.
They are available in various standard sizes, complete with fixing
hardware of the anti-intruder type. Special-size panels can be
made up on request (end pieces, shortened .).
art. FEU. .... support upright for grating fencing panel
These are hot-dip galvanized products made in three different types
of section (plate 80 x 8 mm, T 50 x 7 mm and L 80 x 8 mm), as
required, for fixing and supporting metal grating fencing panels.
T and plate section components are used for straight runs;
L section components are for supporting the panels at 90
angles. They are available in various sizes according to the height
of the fencing to be erected.
art. FEM. .... wire mesh fencing
Mesh fencing in galvanized and plastic-coated steel wire. Supplied
in 25 m rolls, available in different heights and in two mesh patterns:
diamond mesh, which provides great adaptability on uneven
ground; suitable for all fencing which is not erected on a
continuous foundation wall
square mesh, for fencing erected on continuous foundation walls.
Alllegalrightsinthisdocum
entaretheexclusivepropertyofcalzavaraandnopartofitmayb
ereproducedorcommunicatedtoanyotherpartywithoutourau
thorization.
Alldatainthiscatalogueisforreferenceonlyandma
ybechangedwithoutnotice,
inlinewithourpolicyofcontinuous
technicaldevelopment.
7/24/2019 Accessori Stazioni Radio[1]
27/28
calz
avar
a
calz
avar
a
calz
avara
calz
avara
calz
avara
calz
avara
calzav
ara
calzav
ara
calza
vara
calz
avar
a
calz
avara
calz
avara
calzav
ara
calza
vara
calza
vara
Hf
Hu
FRONT VIEW
FESL 2000
FESL 2200
FEST 2000FEST 2200
L
L
TT
Hu
200
220
200220
cm
UprightUpright section type
Hf
175-180
200
175-180200
cm
Fencing heightArticle
FEGP 1160 ..
FEGP 1110 ..
FEGP 1115 ..
110
110
110
W - WidthH - Height
cm
53
93
143
cm
Guard panel dimensions
Dmin - Dmax
60-70
100-110
150-160
cm
Positioning centre distance
W
D
H
PLAN VIEW
SIDE VIEW
SUPPLY CONFIGURATION
Article
calzavara - tel. +39 0432 84381 fax +39 0432 848997 www.calzavara.i t [email protected] - Catalogue 2004 - page 181
SITETOOLS Radio Station Accessories
FENCING
art. FES. .... mesh fencing support upright
These are hot-dip galvanized components made in two different
types of section (T 50 x 7 mm and L 80 x 6 mm), as required.
They are used to fix and support mesh fencing. T section
components are used for straight runs; L section components,
complete with two stiffening struts, are used to provide support at90 angles.
They are available in various sizes according to the height of the
fencing to be erected.
art. FEGP .... ME/CH modular guard panel
These hot-dip galvanized steel components consist of tubular
supporting structures and protective gratings. They are used as
guards and can be fixed to low concrete or brick walls and/or to
kerbs by means of suitable fixings, included in the supply.
These modular guard panels, which allow adjustment of the
spacing between two adjacent units, can be used to create guardsof any length, using three types of standard unit, without having
to resort to special components or on-site modifications to cope
with uneven ground. The item is supplied complete with hardware
and masonry fixing systems, comprising:
mechanical anchoring by means of expansion bolts for fixing to
concrete
chemical anchoring for fixing to walls made of brick or other
building materials.
How to order
Please specify the type of fixing required by adding one of the
following suffixes to the item code:
ME (mechanical anchoring) or CH (chemical anchoring).
Alllegalrightsinthisdocum
entaretheexclusivepropertyofcalzavaraandnopartofitmayb
ereproducedorcommunicatedtoanyotherpartywithoutourau
thorization.
Alldatainthiscatalogueisforreferenceonlyandma
ybechangedwithoutnotice,
inlinewithourpolicyofcontinuous
technicaldevelopment.
7/24/2019 Accessori Stazioni Radio[1]
28/28
inthisdocum
entaretheexclusivepropertyofcalzavaraandnopartofitmayb
ereproducedorcommunicatedtoanyotherpartywithoutourau
thorization.
Alldatainthiscatalogueisforreferenceonlyandma
ybechangedwithoutnotice,
inlinewithourpolicyofcontinuous
technicaldevelopment.