Curriculum Vitae Europass
Curriculum Vitae Europass
!
Informazioni personaliInformazioni personali
Nome / CognomeNome / Cognome Laura Eleonora DEPEROLaura Eleonora DEPEROLaura Eleonora DEPEROIndirizzo privatoIndirizzo privato Via Padre Marcolini, 5
25030 Roncadelle, ItaliaVia Padre Marcolini, 525030 Roncadelle, ItaliaVia Padre Marcolini, 525030 Roncadelle, Italia
Indirizzo di lavoroIndirizzo di lavoro Laboratorio di Chimica per le Tecnologiewww.chem4tech.itDipartimento di Ingegneria Meccanica e IndustrialeUniversità degli Studi di BresciaVia Branze, 2825123 Brescia
Laboratorio di Chimica per le Tecnologiewww.chem4tech.itDipartimento di Ingegneria Meccanica e IndustrialeUniversità degli Studi di BresciaVia Branze, 2825123 Brescia
Laboratorio di Chimica per le Tecnologiewww.chem4tech.itDipartimento di Ingegneria Meccanica e IndustrialeUniversità degli Studi di BresciaVia Branze, 2825123 Brescia
TelefoniTelefoni +390303715472 (ufficio) Cellulare: 3488140775
E-mailE-mail [email protected]@[email protected]
CittadinanzaCittadinanza italianaitalianaitaliana
Data di nascitaData di nascita 19/02/196019/02/196019/02/1960Luogo di nascitaLuogo di nascita Bergamo Bergamo Bergamo
Codice fiscale
ORCID ID
Other IDs
Codice fiscale
ORCID ID
Other IDs
DPRLLN60B59A794E
0000-0001-7818-3212
ResearcherID A-3176-2009 Scopus Author ID 7006791911
DPRLLN60B59A794E
0000-0001-7818-3212
ResearcherID A-3176-2009 Scopus Author ID 7006791911
DPRLLN60B59A794E
0000-0001-7818-3212
ResearcherID A-3176-2009 Scopus Author ID 7006791911
curriculum vitae Laura Eleonora Depero curriculum vitae Laura Eleonora Depero Pag. 1 / 3
Esperienza professionaleEsperienza professionale
2017
2015 -
2015 -
2014-
2013
2013-2016
2013-2014
2012-
2011-2013
2010-
2008-2011
2008-2011
2006-
2006-2009
2001-
2000-
2017
2015 -
2015 -
2014-
2013
2013-2016
2013-2014
2012-
2011-2013
2010-
2008-2011
2008-2011
2006-
2006-2009
2001-
2000-
Chair of the Organizing committee of TXRF 2017 conference that will be held in Brescia
Member of the Scientific Committee of “FABBRICA FUTURO” http://www.fabbricafuturo.it/index.php/comitato/
Director of the Summer School “Atomic Layer Deposition: Method and Applications”, Brescia 6-10 July http://www.instm.it/pagine_non_visibili/summer_school_atomic_layer_deposition_method_and_applications.aspx
Member of COST Action MP1402 – HERALD Hooking together European research in Atomic Layer Deposition (http://www.european-ald.net/)Co-fondatore della start up innovativa “SMART Solution” s.r.l., spin off dell’Università degli Studi di Brescia (www.smartsolutionsweb.it/)
JSPS fellowship presso l’Università di Osaka (2 mesi), Laboratorio prof Kouichi Tsuji
Direttore della Scuola di Dottorato in “Engineering Science” dell’Università degli Studi di Brescia
Coordinatore del progetto Messa a punto di nuovi strumenti e protocolli per l’analisi chimica con applicazioni nell’ambiente e nella sanità nell’ambito dell’ACCORDO-QUADRO MI.S.E.-ICE-CRUI
Coordinatore del progetto VAMAS “Surface chemical analysis — Interlaboratory comparison of total-reflection Xray fluorescence (TXRF) spectroscopy for environmental analysis”
Coordinatore del Dottorato in Materiali per l’Ingegneria, Università degli Studi di Brescia
Convenor del WG3 “X-ray Reflectivity and total reflection X-ray fluorescence spectroscopy” del ISO/TC201 “Surface Chemical Analysis”http://www.iso.org/iso/iso_technical_committee%3Fcommid%3D54618
Coordinatore del progetto europeo FP7 per le SME (NASPE) http://cordis.europa.eu/result/rcn/58172_en.html
Responsabile per INSTM del progetto europeo FP7 CO-NANOMET (FP7 NMP Co-ordination in Nanometrology). http://cordis.europa.eu/result/rcn/54641_it.html
Delegato per l’Italia nel VAMAS (The Versailles Project on Advanced Materials and Standards, www.vamas.org). VAMAS è un’organizzazione internazionale dedicata allo sviluppo della ricerca prenormativa.
Coordinatore del progetto della FONDAZIONE CARIPLO per lo sviluppo di tecnologie abilitanti basate su tecniche di self-assembling e litografia colloidale
Professore Ordinario di Chimica per le Tecnologie e Responsabile del Laboratorio Chem4Tech, Dipartimento di Ingegneria Meccanica e Industriale, Università degli Studi di BresciaLe ricerche riguardano la sintesi e lo studio di nuovi materiali, processi e tecniche di analisi chimico-fisica con applicazioni nell’ambiente, nella medicina e per l’energia e per l’industria agroalimentare
Esperto nella commissione ISO TC229 e CEN/BTWG 166 'Nanotechnology' e ISO TC201 “Surface Chemical Analysis”
Chair of the Organizing committee of TXRF 2017 conference that will be held in Brescia
Member of the Scientific Committee of “FABBRICA FUTURO” http://www.fabbricafuturo.it/index.php/comitato/
Director of the Summer School “Atomic Layer Deposition: Method and Applications”, Brescia 6-10 July http://www.instm.it/pagine_non_visibili/summer_school_atomic_layer_deposition_method_and_applications.aspx
Member of COST Action MP1402 – HERALD Hooking together European research in Atomic Layer Deposition (http://www.european-ald.net/)Co-fondatore della start up innovativa “SMART Solution” s.r.l., spin off dell’Università degli Studi di Brescia (www.smartsolutionsweb.it/)
JSPS fellowship presso l’Università di Osaka (2 mesi), Laboratorio prof Kouichi Tsuji
Direttore della Scuola di Dottorato in “Engineering Science” dell’Università degli Studi di Brescia
Coordinatore del progetto Messa a punto di nuovi strumenti e protocolli per l’analisi chimica con applicazioni nell’ambiente e nella sanità nell’ambito dell’ACCORDO-QUADRO MI.S.E.-ICE-CRUI
Coordinatore del progetto VAMAS “Surface chemical analysis — Interlaboratory comparison of total-reflection Xray fluorescence (TXRF) spectroscopy for environmental analysis”
Coordinatore del Dottorato in Materiali per l’Ingegneria, Università degli Studi di Brescia
Convenor del WG3 “X-ray Reflectivity and total reflection X-ray fluorescence spectroscopy” del ISO/TC201 “Surface Chemical Analysis”http://www.iso.org/iso/iso_technical_committee%3Fcommid%3D54618
Coordinatore del progetto europeo FP7 per le SME (NASPE) http://cordis.europa.eu/result/rcn/58172_en.html
Responsabile per INSTM del progetto europeo FP7 CO-NANOMET (FP7 NMP Co-ordination in Nanometrology). http://cordis.europa.eu/result/rcn/54641_it.html
Delegato per l’Italia nel VAMAS (The Versailles Project on Advanced Materials and Standards, www.vamas.org). VAMAS è un’organizzazione internazionale dedicata allo sviluppo della ricerca prenormativa.
Coordinatore del progetto della FONDAZIONE CARIPLO per lo sviluppo di tecnologie abilitanti basate su tecniche di self-assembling e litografia colloidale
Professore Ordinario di Chimica per le Tecnologie e Responsabile del Laboratorio Chem4Tech, Dipartimento di Ingegneria Meccanica e Industriale, Università degli Studi di BresciaLe ricerche riguardano la sintesi e lo studio di nuovi materiali, processi e tecniche di analisi chimico-fisica con applicazioni nell’ambiente, nella medicina e per l’energia e per l’industria agroalimentare
Esperto nella commissione ISO TC229 e CEN/BTWG 166 'Nanotechnology' e ISO TC201 “Surface Chemical Analysis”
Chair of the Organizing committee of TXRF 2017 conference that will be held in Brescia
Member of the Scientific Committee of “FABBRICA FUTURO” http://www.fabbricafuturo.it/index.php/comitato/
Director of the Summer School “Atomic Layer Deposition: Method and Applications”, Brescia 6-10 July http://www.instm.it/pagine_non_visibili/summer_school_atomic_layer_deposition_method_and_applications.aspx
Member of COST Action MP1402 – HERALD Hooking together European research in Atomic Layer Deposition (http://www.european-ald.net/)Co-fondatore della start up innovativa “SMART Solution” s.r.l., spin off dell’Università degli Studi di Brescia (www.smartsolutionsweb.it/)
JSPS fellowship presso l’Università di Osaka (2 mesi), Laboratorio prof Kouichi Tsuji
Direttore della Scuola di Dottorato in “Engineering Science” dell’Università degli Studi di Brescia
Coordinatore del progetto Messa a punto di nuovi strumenti e protocolli per l’analisi chimica con applicazioni nell’ambiente e nella sanità nell’ambito dell’ACCORDO-QUADRO MI.S.E.-ICE-CRUI
Coordinatore del progetto VAMAS “Surface chemical analysis — Interlaboratory comparison of total-reflection Xray fluorescence (TXRF) spectroscopy for environmental analysis”
Coordinatore del Dottorato in Materiali per l’Ingegneria, Università degli Studi di Brescia
Convenor del WG3 “X-ray Reflectivity and total reflection X-ray fluorescence spectroscopy” del ISO/TC201 “Surface Chemical Analysis”http://www.iso.org/iso/iso_technical_committee%3Fcommid%3D54618
Coordinatore del progetto europeo FP7 per le SME (NASPE) http://cordis.europa.eu/result/rcn/58172_en.html
Responsabile per INSTM del progetto europeo FP7 CO-NANOMET (FP7 NMP Co-ordination in Nanometrology). http://cordis.europa.eu/result/rcn/54641_it.html
Delegato per l’Italia nel VAMAS (The Versailles Project on Advanced Materials and Standards, www.vamas.org). VAMAS è un’organizzazione internazionale dedicata allo sviluppo della ricerca prenormativa.
Coordinatore del progetto della FONDAZIONE CARIPLO per lo sviluppo di tecnologie abilitanti basate su tecniche di self-assembling e litografia colloidale
Professore Ordinario di Chimica per le Tecnologie e Responsabile del Laboratorio Chem4Tech, Dipartimento di Ingegneria Meccanica e Industriale, Università degli Studi di BresciaLe ricerche riguardano la sintesi e lo studio di nuovi materiali, processi e tecniche di analisi chimico-fisica con applicazioni nell’ambiente, nella medicina e per l’energia e per l’industria agroalimentare
Esperto nella commissione ISO TC229 e CEN/BTWG 166 'Nanotechnology' e ISO TC201 “Surface Chemical Analysis”
1998-2001
1997-1999
1998-2001
1997-1999
Professore Associato di Chimica per le Tecnologie e Responsabile del Laboratorio Chem4Tech. Università degli Studi di Brescia
Membro del gruppo per il trasferimento tecnologico dell’Istituto Nazionale di Fisica della Materia e responsabile del programma Spin-off impressa
Professore Associato di Chimica per le Tecnologie e Responsabile del Laboratorio Chem4Tech. Università degli Studi di Brescia
Membro del gruppo per il trasferimento tecnologico dell’Istituto Nazionale di Fisica della Materia e responsabile del programma Spin-off impressa
Professore Associato di Chimica per le Tecnologie e Responsabile del Laboratorio Chem4Tech. Università degli Studi di Brescia
Membro del gruppo per il trasferimento tecnologico dell’Istituto Nazionale di Fisica della Materia e responsabile del programma Spin-off impressa
1988-19981988-1998 Ricercatore di Chimica, Laboratorio di Strutturistica Chimica, Università degli Studi di BresciaRicercatore di Chimica, Laboratorio di Strutturistica Chimica, Università degli Studi di BresciaRicercatore di Chimica, Laboratorio di Strutturistica Chimica, Università degli Studi di Brescia
1987-19881987-1988 Visiting Scientist presso il centro di ricerca IBM ad Almaden (California)Visiting Scientist presso il centro di ricerca IBM ad Almaden (California)Visiting Scientist presso il centro di ricerca IBM ad Almaden (California)
1984-19871984-1987 Responsabile del Laboratorio di “Failure Analysis” della GTE Telecomunicazioni S.p.A. , Cassina de Pecchi, MilanoResponsabile del Laboratorio di “Failure Analysis” della GTE Telecomunicazioni S.p.A. , Cassina de Pecchi, MilanoResponsabile del Laboratorio di “Failure Analysis” della GTE Telecomunicazioni S.p.A. , Cassina de Pecchi, Milano
curriculum vitae Laura Eleonora Depero curriculum vitae Laura Eleonora Depero Pag. 2 / 3
Valutatore di progetti per agenzie nazionali e internazionali fra cui MIUR, ANVUR, Regione Piemonte, the National Center of Science and Technology Evaluation of the Republic of Kazakhstan, the"Grant Agency of the Academy of Sciences of the Czech Republic " , TWAS, VIGONI Program (Italy-Germany), programma Bando Galileo 2013-2014
Valutatore di progetti per agenzie nazionali e internazionali fra cui MIUR, ANVUR, Regione Piemonte, the National Center of Science and Technology Evaluation of the Republic of Kazakhstan, the"Grant Agency of the Academy of Sciences of the Czech Republic " , TWAS, VIGONI Program (Italy-Germany), programma Bando Galileo 2013-2014
Valutatore di progetti per agenzie nazionali e internazionali fra cui MIUR, ANVUR, Regione Piemonte, the National Center of Science and Technology Evaluation of the Republic of Kazakhstan, the"Grant Agency of the Academy of Sciences of the Czech Republic " , TWAS, VIGONI Program (Italy-Germany), programma Bando Galileo 2013-2014
Co-inventore di 6 brevettiCo-inventore di 6 brevettiCo-inventore di 6 brevetti
PROGETTI2015
2014-2017
2014-2016
2014-2015
2013-2015
2013-2015
2012-2016
2009-2010
2018-2011
2008-2011
2009-2011
2006-2009
2006-2008
2006-2007
2004-2006
2003-2007
2002-2005
2001-2003
2000-2002
1999-2001
PROGETTI2015
2014-2017
2014-2016
2014-2015
2013-2015
2013-2015
2012-2016
2009-2010
2018-2011
2008-2011
2009-2011
2006-2009
2006-2008
2006-2007
2004-2006
2003-2007
2002-2005
2001-2003
2000-2002
1999-2001
Responsible of UNIBS Unit in the proposal METROFOOD - Infrastructure for promoting Metrology submitted for the ESFRI Roadmap 2016 that passed the first evaluation step.Partecipant of LIFE MED Project (Medical Equipment Discarded – A new integrate system to reduce waste by medical equipment and medical WEEE) http://www.life-med-equipment.eu/sito/project Responsible of UNIBS Unit of FP7 Project ISTRESS “Pre-standardisation of incremental FIB micro-milling for intrinsic stress evaluation at the sub-micron scale” http://www.stm.uniroma3.it/iSTRESS/Pages/iSTRESS%20Home%20page.aspxParticipant to the project “ A BRESCIA SI PARLA DI SCIENZA E TECNOLOGIA” ex legge 6/2000 DD 369 to promote public undestanding of science.Participant to the Lombardy Regional project TECNOENERGY devoted to the assessment of BATs and the evalution of their environmental impacts in foundry.Coordinator of the project “ Assessment of new protocols for the TXRF elemental analysis of environmental and biological samples” founded in the frame of “ACCORDO-QUADRO MI.S.E.-ICE-CRUI”.Coordinator of the VAMAS Project “Surface chemical analysis — Interlaboratory comparison of total-reflection Xray fluorescence (TXRF) spectroscopy for environmental analysis”. The project involves 20 laboratory belonging to 15 Nations.Responsible of UNIBS Unit of the Regional Project ATP 2008 devoted to the development of new PVD coatings for plastic materials.Coordinator of an European project for SME (NASPE) http://cordis.europa.eu/result/rcn/58172_en.htmlResponsible for INSTM of CO-NANOMET (FP7 NMP Co-ordination in Nanometrology, http://cordis.europa.eu/result/rcn/54641_it.html)Responsible of UNIBS Unit of PRIN 2008 project “Study of biomolecular interactions between angiogenetic factors and their receptors by nanomechanical microcantilevers”.Coordinator of CARIPLO FOUNDATION project “ Development of self assembling techniques and soft lithography”.Responsible of UNIBS Unit of PRIN 2005 project “ Coated microcantilever for the molecular recognition” Responsible of the UNIBS Unit of Lombardy Regional project “Messa a punto di nuovi materiali per elettropiloti pneumatici miniaturizzati” Responsible of UNIBS Unit of PRIN2003 project “ Synthesis and structural, chemical, nanonomechanical characterization of magnetic multilayers and nanostructures obtained by lithography”.Responsible of UNIBS Unit of FIRB2001 project "Nano- e micro-spectroscopies by means of synchrotron radiation integrated with STM/AFM advanced system for the study of artificial functional materials”Responsible of the UNIBS Unit of FISR2001 project, "Silicon Carbide on Silicon for micro-electro-mechanical devices operating in hostile environment”.Responsible of UNIBS Unit of PRIN 2000 project, "Microstructure and interfaces of magnetic thin layers”.Responsible of UNIBS Unit of the project “Surface, Thin layers and Molecular Materials “ in the frame of “Progetto Finalizzato Materiali Speciali per Tecnologie Avanzate II” of CNRResponsible of UNIBS Unit of PRIN 1998 project "Structural and microstructural studies of metallic and semiconductor thin layers"
Responsible of UNIBS Unit in the proposal METROFOOD - Infrastructure for promoting Metrology submitted for the ESFRI Roadmap 2016 that passed the first evaluation step.Partecipant of LIFE MED Project (Medical Equipment Discarded – A new integrate system to reduce waste by medical equipment and medical WEEE) http://www.life-med-equipment.eu/sito/project Responsible of UNIBS Unit of FP7 Project ISTRESS “Pre-standardisation of incremental FIB micro-milling for intrinsic stress evaluation at the sub-micron scale” http://www.stm.uniroma3.it/iSTRESS/Pages/iSTRESS%20Home%20page.aspxParticipant to the project “ A BRESCIA SI PARLA DI SCIENZA E TECNOLOGIA” ex legge 6/2000 DD 369 to promote public undestanding of science.Participant to the Lombardy Regional project TECNOENERGY devoted to the assessment of BATs and the evalution of their environmental impacts in foundry.Coordinator of the project “ Assessment of new protocols for the TXRF elemental analysis of environmental and biological samples” founded in the frame of “ACCORDO-QUADRO MI.S.E.-ICE-CRUI”.Coordinator of the VAMAS Project “Surface chemical analysis — Interlaboratory comparison of total-reflection Xray fluorescence (TXRF) spectroscopy for environmental analysis”. The project involves 20 laboratory belonging to 15 Nations.Responsible of UNIBS Unit of the Regional Project ATP 2008 devoted to the development of new PVD coatings for plastic materials.Coordinator of an European project for SME (NASPE) http://cordis.europa.eu/result/rcn/58172_en.htmlResponsible for INSTM of CO-NANOMET (FP7 NMP Co-ordination in Nanometrology, http://cordis.europa.eu/result/rcn/54641_it.html)Responsible of UNIBS Unit of PRIN 2008 project “Study of biomolecular interactions between angiogenetic factors and their receptors by nanomechanical microcantilevers”.Coordinator of CARIPLO FOUNDATION project “ Development of self assembling techniques and soft lithography”.Responsible of UNIBS Unit of PRIN 2005 project “ Coated microcantilever for the molecular recognition” Responsible of the UNIBS Unit of Lombardy Regional project “Messa a punto di nuovi materiali per elettropiloti pneumatici miniaturizzati” Responsible of UNIBS Unit of PRIN2003 project “ Synthesis and structural, chemical, nanonomechanical characterization of magnetic multilayers and nanostructures obtained by lithography”.Responsible of UNIBS Unit of FIRB2001 project "Nano- e micro-spectroscopies by means of synchrotron radiation integrated with STM/AFM advanced system for the study of artificial functional materials”Responsible of the UNIBS Unit of FISR2001 project, "Silicon Carbide on Silicon for micro-electro-mechanical devices operating in hostile environment”.Responsible of UNIBS Unit of PRIN 2000 project, "Microstructure and interfaces of magnetic thin layers”.Responsible of UNIBS Unit of the project “Surface, Thin layers and Molecular Materials “ in the frame of “Progetto Finalizzato Materiali Speciali per Tecnologie Avanzate II” of CNRResponsible of UNIBS Unit of PRIN 1998 project "Structural and microstructural studies of metallic and semiconductor thin layers"
Responsible of UNIBS Unit in the proposal METROFOOD - Infrastructure for promoting Metrology submitted for the ESFRI Roadmap 2016 that passed the first evaluation step.Partecipant of LIFE MED Project (Medical Equipment Discarded – A new integrate system to reduce waste by medical equipment and medical WEEE) http://www.life-med-equipment.eu/sito/project Responsible of UNIBS Unit of FP7 Project ISTRESS “Pre-standardisation of incremental FIB micro-milling for intrinsic stress evaluation at the sub-micron scale” http://www.stm.uniroma3.it/iSTRESS/Pages/iSTRESS%20Home%20page.aspxParticipant to the project “ A BRESCIA SI PARLA DI SCIENZA E TECNOLOGIA” ex legge 6/2000 DD 369 to promote public undestanding of science.Participant to the Lombardy Regional project TECNOENERGY devoted to the assessment of BATs and the evalution of their environmental impacts in foundry.Coordinator of the project “ Assessment of new protocols for the TXRF elemental analysis of environmental and biological samples” founded in the frame of “ACCORDO-QUADRO MI.S.E.-ICE-CRUI”.Coordinator of the VAMAS Project “Surface chemical analysis — Interlaboratory comparison of total-reflection Xray fluorescence (TXRF) spectroscopy for environmental analysis”. The project involves 20 laboratory belonging to 15 Nations.Responsible of UNIBS Unit of the Regional Project ATP 2008 devoted to the development of new PVD coatings for plastic materials.Coordinator of an European project for SME (NASPE) http://cordis.europa.eu/result/rcn/58172_en.htmlResponsible for INSTM of CO-NANOMET (FP7 NMP Co-ordination in Nanometrology, http://cordis.europa.eu/result/rcn/54641_it.html)Responsible of UNIBS Unit of PRIN 2008 project “Study of biomolecular interactions between angiogenetic factors and their receptors by nanomechanical microcantilevers”.Coordinator of CARIPLO FOUNDATION project “ Development of self assembling techniques and soft lithography”.Responsible of UNIBS Unit of PRIN 2005 project “ Coated microcantilever for the molecular recognition” Responsible of the UNIBS Unit of Lombardy Regional project “Messa a punto di nuovi materiali per elettropiloti pneumatici miniaturizzati” Responsible of UNIBS Unit of PRIN2003 project “ Synthesis and structural, chemical, nanonomechanical characterization of magnetic multilayers and nanostructures obtained by lithography”.Responsible of UNIBS Unit of FIRB2001 project "Nano- e micro-spectroscopies by means of synchrotron radiation integrated with STM/AFM advanced system for the study of artificial functional materials”Responsible of the UNIBS Unit of FISR2001 project, "Silicon Carbide on Silicon for micro-electro-mechanical devices operating in hostile environment”.Responsible of UNIBS Unit of PRIN 2000 project, "Microstructure and interfaces of magnetic thin layers”.Responsible of UNIBS Unit of the project “Surface, Thin layers and Molecular Materials “ in the frame of “Progetto Finalizzato Materiali Speciali per Tecnologie Avanzate II” of CNRResponsible of UNIBS Unit of PRIN 1998 project "Structural and microstructural studies of metallic and semiconductor thin layers"
Istruzione e formazioneIstruzione e formazione1984197919841979
Laurea in Fisica dello Stato Solido, Università degli Studi di Milano, 110/110Diploma Liceo Scientifico Alessandro Volta, 60/60Laurea in Fisica dello Stato Solido, Università degli Studi di Milano, 110/110Diploma Liceo Scientifico Alessandro Volta, 60/60Laurea in Fisica dello Stato Solido, Università degli Studi di Milano, 110/110Diploma Liceo Scientifico Alessandro Volta, 60/60
curriculum vitae Laura Eleonora Depero curriculum vitae Laura Eleonora Depero Pag. 3 / 3