FONDATION LOUIS VUITTON - PARIS, FRANCE
GEHRY PARTNERS
Nella parte settentrionale del Bois de Boulogne di Parigi, la Fondation Louis
Vuitton progettata da Frank O. Gehry è una moderna interpretazione dei
palazzi di cristallo ottocenteschi: il nucleo centrale dell’edificio, rivestito
in cemento bianco levigato, è avvolto e nascosto da un complesso
sistema di vele in vetro, progettate con l’ausilio di avanzate tecnologie
3D e realizzate come pezzi unici. All’interno del complesso, undici sale
ospitano la mostra permanente della fondazione e mostre temporanee,
mentre un auditorium a configurazione modulabile può contenere da
350 a 1.000 persone a seconda delle necessità. Illuminato naturalmente
grazie alle ampie vetrate laterali, l’auditorium misura 900 mq ed è stato
pavimentato con un parquet in massello di rovere; per la posa sono
stati impiegati prodotti Mapei, scelti per assicurare durata nel tempo, in
particolare rispetto ai rischi legati all’umidità. Per l’impermeabilizzazione
è stato utilizzato l’appretto epossidico bicomponente Primer MF, la cui
superficie è stata successivamente spolverata a rifiuto con Quarzo 1,2,
realizzando una ulteriore barriera contro l’umidità residua, e livellata
con la lisciatura Plano 3. Il parquet, le cui doghe misurano 180 mm di
larghezza, 2.100 mm e 2.410 mm di lunghezza e 20 mm di spessore, è
stato incollato con Ultrabond Eco S948 1K. Una parte del pavimento
(circa 500 mq) è stata incollata su un sistema modulabile a scomparsa
composto da pannelli in legno posizionati su un’ossatura metallica.
I prodotti Mapei sono stati scelti anche per la posa a parete e a
pavimento delle piastrelle dei bagni, incollate con l’adesivo cementizio
ad alte prestazioni Keraflex e successivamente stuccate con la malta
epossidica Kerapoxy Design, resistente agli acidi e facile da pulire.
In the northern section of the Bois de Boulogne park in Paris stands
the Fondation Louis Vuitton designed by Frank O. Gehry as a modern
interpretation of the 19th-century crystal palace. The nucleus of the
building, clad in smooth white concrete, is embraced and concealed
by a complex series of glass sails designed using advanced 3D
technology and built as individual pieces.
Inside, the foundation’s permanent and temporary exhibitions span 11
rooms, while the auditorium can be configured to hold between 350
and 1,000 people. This 900 sq m hall receives natural light through large
lateral windows and has a solid oak parquet floor. Mapei products were
used to lay the latter, especially to ensure a long lasting solution able to
handle the risks posed by the dampness.
The waterproofing was done using the Primer MF, a two-component
epoxy primer, with this surface then saturated with Quarzo 1,2 to create
an additional barrier against dampness. Next, it was levelled using
Plano 3. The parquet pieces are 180 mm wide, 2,100 mm and 2,410 mm
long and 20 mm thick and were glued using Ultrabond Eco S948 1K. A
section of the floor (about 500 sq m) was glued onto a concealable
modular segment made of wooden panels on a metal frame. Mapei
products were also used to lay the bathroom tiles on the floor and walls,
using Keraflex high-performance cementitious adhesive and Kerapoxy
Design epoxy resin-based grout as it is acid resistant and easy to clean.
128
MAPEIVia Cafiero, 22 - I - 20158 Milano
Tel. +39 02 376731- Fax + 39 02 37673214
E-mail: [email protected] - www.mapei.com